ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1s and ZR-1 Parts For Sale/Wanted

Reply
 
Thread Tools Display Modes
Old 12-20-2017   #31
WVZR-1
 
Join Date: Oct 2004
Posts: 1,890
Default Re: WANTED: Cam position sensor for LT5

Until Phil has the sensor and confirms the configuration of the sensor to the cavity the connector is of little concern. I've ID'd the connector shell and supplied Phil with all of the tools needed to evaluate components and eliminate guessing. The terminals and seals need to be selective based upon the wire gauge of the sensor he's considered.

I'd say the project is 'under control'!

Jeff - your sources are valid for parts. I used another but I was buying in bulk when I was purchasing.
WVZR-1 is offline   Reply With Quote
Old 12-20-2017   #32
secondchance
 
Join Date: Aug 2006
Location: McLean, VA
Posts: 3,721
Default Re: WANTED: Cam position sensor for LT5

Is this the connector we are looking for?
If the sensor is correct minus the connector, re-pinning should be relatively easy.
https://www.walmart.com/ip/Dorman-64...&wl13=&veh=sem

Last edited by secondchance; 12-20-2017 at 06:49 AM.
secondchance is offline   Reply With Quote
Old 12-20-2017   #33
WVZR-1
 
Join Date: Oct 2004
Posts: 1,890
Default Re: WANTED: Cam position sensor for LT5

Quote:
Originally Posted by secondchance View Post
Is this the connector we are looking for?
If the sensor is correct minus the connector, re-pinning should be relatively easy.
https://www.walmart.com/ip/Dorman-64...&wl13=&veh=sem
Hello Yun - good find. Interesting but it's a long way around to get to where you want to be. You also have to question the Dorman assembly. Some of these after-market connectors while they "mate" correctly they're assembled with completely different terminal retention etc. They won't always 're-pin'.

For that price a person could buy enough components to build maybe 4 of the correct harness connectors. Right now like I mentioned Phil should have information and until the sensor compatibility to the cavity is confirmed there's no rush to the connector.

Actually if a person such as Young1 had a known good connector on a defective sensor he would only need the sensor, transfer his conduit, buy 3 terminals and 3 seals for the terminals assemble and be done.

Last edited by WVZR-1; 12-20-2017 at 08:08 AM.
WVZR-1 is offline   Reply With Quote
Old 12-20-2017   #34
secondchance
 
Join Date: Aug 2006
Location: McLean, VA
Posts: 3,721
Default Re: WANTED: Cam position sensor for LT5

Quote:
Originally Posted by WVZR-1 View Post
Hello Yun - good find. Interesting but it's a long way around to get to where you want to be. You also have to question the Dorman assembly. Some of these after-market connectors while they "mate" correctly they're assembled with completely different terminal retention etc. They won't always 're-pin'.

For that price a person could buy enough components to build maybe 4 of the correct harness connectors. Right now like I mentioned Phil should have information and until the sensor compatibility to the cavity is confirmed there's no rush to the connector.

Actually if a person such as Young1 had a known good connector on a defective sensor he would only need the sensor, transfer his conduit, buy 3 terminals and 3 seals for the terminals assemble and be done.
Hey, Dave! Hope all is excellent with you.
I have been busy tracking down correct GM connectors since I have been having a lot of "oh-s**t" moments breaking OEM connectors while disconnecting them. Price you pay for holding onto 23 plus year old car... AC Delco use to have an excellent webpage where you can list AC Delco connectors by male/female and number of prongs. For some reason, I cannot find this web page. Could it be that GM really wants us to walk away from 20 plus year old cars and buy new?
secondchance is offline   Reply With Quote
Old 12-20-2017   #35
tnova
 
Join Date: Oct 2013
Location: Spokane Valley, WA
Posts: 115
Default Re: WANTED: Cam position sensor for LT5

My sensor was cracked where it bolted to the head. I made a JB Weld repair but would prefer to replace the sensor prior to reinstalling the engine. Looking forward to the results.
tnova is offline   Reply With Quote
Old 12-20-2017   #36
Z51JEFF
 
Z51JEFF's Avatar
 
Join Date: Dec 2007
Location: Fremont,Ca
Posts: 3,073
Default Re: WANTED: Cam position sensor and Dual mass flywheel for 1990 ZR1 LT5

Quote:
Originally Posted by Jagdpanzer View Post
Here you go






Sent from my iPhone using ZR-1 Net Registry
I’ve got everything but the grey holder but that can be transferred onto the new connector,even have the OEM PACKARD wire crimper and the release tool. I’ve got 2 boxes of all his stuff but can only find one. I can post pictures on the Z page on Facebook.
Z51JEFF is offline   Reply With Quote
Old 12-20-2017   #37
Z51JEFF
 
Z51JEFF's Avatar
 
Join Date: Dec 2007
Location: Fremont,Ca
Posts: 3,073
Default Re: WANTED: Cam position sensor for LT5

For some reason I don’t see an option to post pictures on the Z Registry.
Z51JEFF is offline   Reply With Quote
Old 12-20-2017   #38
Ccmano
 
Ccmano's Avatar
 
Join Date: Jun 2006
Location: Sparks, NV
Posts: 2,852
Default Re: WANTED: Cam position sensor for LT5

Quote:
Originally Posted by Z51JEFF View Post
For some reason I don’t see an option to post pictures on the Z Registry.
Go to the user CP, upper left. Then pictures and albums on the left.

I use tinypic.com very simple to use app on my iPad and iPhone. A little clunky on windows.
H
__________________
90'ZR-1 #1461 Red/Black
Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold
08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold
05 C6 Z51 Red/Black Sold
90'ZR-1 #1723 Black/Gray Sold but not forgotten
91' Z51 L98 White Vert. My First, you always remember your first. Sold.
Ccmano is offline   Reply With Quote
Old 12-20-2017   #39
Z51JEFF
 
Z51JEFF's Avatar
 
Join Date: Dec 2007
Location: Fremont,Ca
Posts: 3,073
Default Re: WANTED: Cam position sensor for LT5

Quote:
Originally Posted by Ccmano View Post
Go to the user CP, upper left. Then pictures and albums on the left.

I use tinypic.com very simple to use app on my iPad and iPhone. A little clunky on windows.
H
The pictures are on the Z page on Facebook.
Z51JEFF is offline   Reply With Quote
Old 12-20-2017   #40
A1990
 
A1990's Avatar
 
Join Date: Dec 2003
Location: Grand Island NE
Posts: 1,511
Default Re: WANTED: Cam position sensor and Dual mass flywheel for 1990 ZR1 LT5

Picture from Jeff:



Another picture




Sent from my iPhone using ZR-1 Net Registry
__________________
Dennis Fierstein
90 ZR-1 #2562 Atomic-Z
ZR-1 Net Registry Chairman of the Board
ZR-1 Net Registry Treasurer
A1990 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:29 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020