ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1s and ZR-1 Parts For Sale/Wanted

Reply
 
Thread Tools Display Modes
Old 05-29-2007   #31
jrd1990zr1
 
jrd1990zr1's Avatar
 
Join Date: Dec 2005
Location: Delanson, NY
Posts: 914
Default Re: Going to NCRS in August, need help

Quote:
Originally Posted by Dave 90ZR-1
The filters in the picture will not get you full NCRS judging points. They are service replacements. Th original filter is a PF970. No "C" in the number and "Duraguard" is not printed on the lable. The original filter was only installed at the factory and was not for sale to the public. You will see original filters on crate LT5 motors that have never been installed. I have never seen an original filter for sale but you never know. If anyone has any different information on these filters let me know. This is the standard we are currently using when judging 90-91 ZR-1.

Dave
Dave,

You are right on the money. My car was judged in NJ with a 970C service replacement filter. I was hit for a few points, can't say exactly until I get my sheets. I have never seen a real 970 filter, except there is a copy of a label in the NCRS Judging guide. If you could find a real one and get accurate duplicates silk screened you could for sure sell them.
__________________

1968 convertible Lemans Blue,
1986 coupe Medium Blue NCRS Top Flight (sold),
1990 ZR1 #2529 Red NCRS Regional and National Top Flight (sold),
1990 ZR1 #2124 Charcoal Metallic NCRS Top Flight 2010 & 2018,
2003 Anniversary Red Convertible (sold)
jrd1990zr1 is offline   Reply With Quote
Old 05-29-2007   #32
A26B
 
A26B's Avatar
 
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,393
Default Re: Going to NCRS in August, need help

Would this be the one, the original, with no C suffix? Looks like a label would do the job on a black filter.
__________________
Jerry Downey
JERRYS LT5 GASKETS & PARTS
http://www.jerrysgaskets.com
1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc.
2016 Black-Red, 3LT-Z51 Auto 8-speed.

Last edited by A26B; 05-29-2007 at 10:59 PM.
A26B is offline   Reply With Quote
Old 05-29-2007   #33
A26B
 
A26B's Avatar
 
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,393
Default Re: Going to NCRS in August, need help

While we're on the subject of parts required for NCRS judging, I'm missing one of the plastic "sleeves" that covers the braided fuel line in a 93. Anyone have and original.

BTW, I can probably come up with the plug wire clip you're looking for. Can you get me a picture, draw it or something?
__________________
Jerry Downey
JERRYS LT5 GASKETS & PARTS
http://www.jerrysgaskets.com
1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc.
2016 Black-Red, 3LT-Z51 Auto 8-speed.
A26B is offline   Reply With Quote
Old 05-30-2007   #34
jrd1990zr1
 
jrd1990zr1's Avatar
 
Join Date: Dec 2005
Location: Delanson, NY
Posts: 914
Default Re: Going to NCRS in August, need help

Quote:
Originally Posted by A26B
Would this be the one, the original, with no C suffix? Looks like a label would do the job on a black filter.
That sure looks like one. Would need a high res close up to tell for sure. I can't quite make out the letters or numbers. Are you interested in selling it???

If so PM me.

Thanks
__________________

1968 convertible Lemans Blue,
1986 coupe Medium Blue NCRS Top Flight (sold),
1990 ZR1 #2529 Red NCRS Regional and National Top Flight (sold),
1990 ZR1 #2124 Charcoal Metallic NCRS Top Flight 2010 & 2018,
2003 Anniversary Red Convertible (sold)
jrd1990zr1 is offline   Reply With Quote
Old 05-30-2007   #35
jrd1990zr1
 
jrd1990zr1's Avatar
 
Join Date: Dec 2005
Location: Delanson, NY
Posts: 914
Default Re: Going to NCRS in August, need help

Quote:
Originally Posted by A26B
While we're on the subject of parts required for NCRS judging, I'm missing one of the plastic "sleeves" that covers the braided fuel line in a 93. Anyone have and original.

BTW, I can probably come up with the plug wire clip you're looking for. Can you get me a picture, draw it or something?
Jerry,

We test judged the 1993's at the NJ Regional. I participated on the mechanical team. If I recall correctly the plastic sleeve appeared to be similar to a black plastic wire loom. I don't have one but you might be able to get it from one of the folks parting out a car on the forum. Best of luck if you are going to have your car judged. I understand that NCRS will officially start judging the 1992/93 model year at the first regional meet after the National convention this summer.

Best Regards.
__________________

1968 convertible Lemans Blue,
1986 coupe Medium Blue NCRS Top Flight (sold),
1990 ZR1 #2529 Red NCRS Regional and National Top Flight (sold),
1990 ZR1 #2124 Charcoal Metallic NCRS Top Flight 2010 & 2018,
2003 Anniversary Red Convertible (sold)
jrd1990zr1 is offline   Reply With Quote
Old 05-30-2007   #36
Ed Hoffman
 
Join Date: Jun 2006
Location: Las Vegas
Posts: 26
Default Re: Going to NCRS in August, need help

I just received my confirmation from the people at the Northwest Regional in Leavenworth, Wa., that 92-93's will be flight judged. I was also advised that branching off of I/S-5 in No. Ca. onto US 97, is a real Corvette ride experience. Am looking forward to it. They also award miles points for those that drive their cars to the event, and then have them flight judged. They will provide a clean up area and or wash rack. This will take place from Sept. 13-15, 07. Hope to see some other ZR's or LT's at this event.
Ed Hoffman is offline   Reply With Quote
Old 05-30-2007   #37
Dave 90ZR-1
 
Dave 90ZR-1's Avatar
 
Join Date: Dec 2005
Location: New Jersey
Posts: 14
Post Re: Going to NCRS in August, need help

The filter look like an original one but you might loose a point or two on condition.
Dave 90ZR-1 is offline   Reply With Quote
Old 06-04-2007   #38
TommyL
 
Join Date: Sep 2005
Location: Ontario, Canada
Posts: 204
Default Re: Going to NCRS in August, need help

Quote:
Originally Posted by jrd1990zr1
Dave,

You are right on the money. My car was judged in NJ with a 970C service replacement filter. I was hit for a few points, can't say exactly until I get my sheets. I have never seen a real 970 filter, except there is a copy of a label in the NCRS Judging guide. If you could find a real one and get accurate duplicates silk screened you could for sure sell them.
I am in the processes of having them duplicated.
TommyL is offline   Reply With Quote
Old 06-05-2007   #39
A26B
 
A26B's Avatar
 
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,393
Default Re: Going to NCRS in August, need help

Quote:
Originally Posted by TommyL
I am in the processes of having them duplicated.
Put me on your list of buyers! I was just about to have some made myself...
__________________
Jerry Downey
JERRYS LT5 GASKETS & PARTS
http://www.jerrysgaskets.com
1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc.
2016 Black-Red, 3LT-Z51 Auto 8-speed.
A26B is offline   Reply With Quote
Old 06-05-2007   #40
TommyL
 
Join Date: Sep 2005
Location: Ontario, Canada
Posts: 204
Default Re: Going to NCRS in August, need help

I have these right now, $12 for 2 If interested contact me kito@sympatico.ca
Attached Images
File Type: jpg oil1.jpg (31.2 KB, 53 views)

Last edited by TommyL; 06-05-2007 at 03:23 PM.
TommyL is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:26 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020