24hr endurance badge - Page 3 - ZR-1 Net Registry Forums

LGAFF · 04-20-2009

I just thought of an idea that kicks the sh** out of this one. Will design it and let everyone see it.....I think it will be classy, display some of the heritage....yet very subtle.

More to come...

LGAFF · 04-20-2009

Could go with either here: MAP cover is the thought.

Silver Chrome with black crinkle/textured insert.

Obviously it would look cleaner, Lettering tighter in the provisions...but another thought:

I know it should read 370ftlbs but I was in a hurry and typo'd

TommyL · 04-21-2009

Quote:

Originally Posted by flyin ryan

Unfortunatly, I can't imagine the FIA being happy about their logo being used without some cash going the other way...not that i'm going to say anything

This will only be an issue if they are sold for profit...for "our" personal use, I doubt anyone would bother with us.

GOLDCYLON · 04-21-2009

Lee Maybe a Garage banner?

4DSZR1 · 04-21-2009

Quote:

Originally Posted by GOLDCYLON

Lee Maybe a Garage banner?

LGAFF · 04-21-2009

Mocked it up to see what it would look like, might be too much

ZR-1 Franz · 04-22-2009

Hello from Switzerland,

The idea to create a 24 hr endurance badge would be absolutely perfect.
Everybody should know what a ZR-1 is able to do. But not in this form.
I would not like to have the FIA sign on my car. I think I would always
see the the face of Max Mosley, the president of these bandits.
The FIA did absolutely nothing for this run. They only supervised it and
were sad about it that the ZR-1 was not a Ferrari. I mentioned it once before:
FIA means Ferrari's Interest Agency!

Have a fine day and go on to create a fine badge, without FIA.

LGAFF · 04-23-2009

OK last stab at this, at this point I think I am just doing it to see if I can make something work

MB ZR1 · 04-23-2009

Just a suggestion but, I think it would work well on the ashtray door. It would be something different then the engine specs badge. Or on radiator housing. I put an engine specs decal there as seen in this photo, but a 24hr badge would look really good.

04-20-2009	#21
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,180	Re: 24hr endurance badge I just thought of an idea that kicks the sh** out of this one. Will design it and let everyone see it.....I think it will be classy, display some of the heritage....yet very subtle. More to come... __________________ LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359

04-20-2009	#22
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,180	Re: 24hr endurance badge Could go with either here: MAP cover is the thought. Silver Chrome with black crinkle/textured insert. Obviously it would look cleaner, Lettering tighter in the provisions...but another thought: I know it should read 370ftlbs but I was in a hurry and typo'd __________________ LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 Last edited by LGAFF; 04-20-2009 at 09:40 PM.

04-21-2009	#24
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,120	Re: 24hr endurance badge Lee Maybe a Garage banner? __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

04-21-2009	#26
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,180	Re: 24hr endurance badge Mocked it up to see what it would look like, might be too much __________________ LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 Last edited by LGAFF; 04-21-2009 at 09:51 PM.

04-22-2009	#27
ZR-1 Franz Join Date: Aug 2005 Location: Solothurn, Switzerland Posts: 144	Re: 24hr endurance badge Hello from Switzerland, The idea to create a 24 hr endurance badge would be absolutely perfect. Everybody should know what a ZR-1 is able to do. But not in this form. I would not like to have the FIA sign on my car. I think I would always see the the face of Max Mosley, the president of these bandits. The FIA did absolutely nothing for this run. They only supervised it and were sad about it that the ZR-1 was not a Ferrari. I mentioned it once before: FIA means Ferrari's Interest Agency! Have a fine day and go on to create a fine badge, without FIA.

04-23-2009	#28
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,180	Re: 24hr endurance badge OK last stab at this, at this point I think I am just doing it to see if I can make something work __________________ LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 Last edited by LGAFF; 04-23-2009 at 12:37 AM.

04-23-2009	#29
MB ZR1 Join Date: May 2008 Location: Stonewall, Manitoba Posts: 79	Re: 24hr endurance badge Just a suggestion but, I think it would work well on the ashtray door. It would be something different then the engine specs badge. Or on radiator housing. I put an engine specs decal there as seen in this photo, but a 24hr badge would look really good. __________________ 1990 ZR-1 S/n 1096