Titatium Exhaust

[Paul Workman]

Originally Posted by Pete

Rob,anything could be done, trying to keep cost down.

Pete

Pete, are the titanium mufflers along the line of the Dynamax 17288s, i.e., 3" in splitting into two 2"(?) outlets? And, one other thing: how are the mufflers secured to the stock hanger? (the outer shell of the Dynamax mufflers have had a problem tearing apart where the stock (type) hanger is welded onto the shell.

(Being titanium, for one thing, I don't know that the stock (steel) hanger could even be welded to the titanium muffler. That being the case, some other arrangement/hanger would be needed, yes?)

[Pete]

Paul yes the muffler would be basicly a copy of the Dynomax mufflers.

I would think they can make a reinforcement to weld a Titanium screw at the back of the Ti mufflers.

Pete

Originally Posted by Paul Workman

Pete, are the titanium mufflers along the line of the Dynamax 17288s, i.e., 3" in splitting into two 2"(?) outlets? And, one other thing: how are the mufflers secured to the stock hanger? (the outer shell of the Dynamax mufflers have had a problem tearing apart where the stock (type) hanger is welded onto the shell.

(Being titanium, for one thing, I don't know that the stock (steel) hanger could even be welded to the titanium muffler. That being the case, some other arrangement/hanger would be needed, yes?)