My first plenum pull! - Page 3 - ZR-1 Net Registry Forums

scottfab · 04-20-2010

Quote:

Originally Posted by rudolph schenker

I have not cleaned down by the drain hole yet, but it appeared open.

A wire cloths hanger straightened out with a small piece of cloth on the
end works great. Run it all the way through and back out like your cleaning a gun barrel.

Z51JEFF · 04-20-2010

Quote:

Originally Posted by rudolph schenker

Marc Haibeck did the refinishing (did a great job!).
Now I am sorting out the vacuum lines and checking them. I must admit the lines seem like a lot of extra work. Seems like the engineers could have simplified it!

The vacuum lines the first time out were abit scary but Ive pulled the plenum enough I think I could do it without any pictures.........but Ill take some just to be safe.I dont know if you have the plenum back on yet but Haibeck has a DVD for the system checks for the vacuum system as well as the fuel system for leaks.With the DVD you can watch the actuators for operation and pressurize the fuel system to check for leaks.

rudolph schenker · 04-20-2010

Quote:

Originally Posted by Z51JEFF

The vacuum lines the first time out were abit scary but Ive pulled the plenum enough I think I could do it without any pictures.........but Ill take some just to be safe.I dont know if you have the plenum back on yet but Haibeck has a DVD for the system checks for the vacuum system as well as the fuel system for leaks.With the DVD you can watch the actuators for operation and pressurize the fuel system to check for leaks.

Thanks, I'll take the help. I took a lot of pics during the disassembly. They have really helped!

rudolph schenker · 05-03-2010

Finally found time to finish it up....!!

scholtmj · 05-04-2010

I'd be scared to drive that work of art!

A26B · 05-04-2010

Looks great! You're now an accomplished pro!

iliad427 · 05-04-2010

Great job!

rudolph schenker · 05-05-2010

Thanks for the compliments and also thanks to those on this forum for all the information and help!

ZZZZZR1 · 05-05-2010

Quote:

Originally Posted by rudolph schenker

Thanks for the compliments and also thanks to those on this forum for all the information and help!

Now that is what an LT5 is supposed to look like!

congrats!

David

Paul Workman · 05-05-2010

WooHoo!! Thatz beautymuss!!!

Nice...Very nice!

P.

05-03-2010	#24
rudolph schenker Join Date: Jun 2009 Location: utah Posts: 128	Re: My first plenum pull! Finally found time to finish it up....!! __________________ 1994 ZR-1 Admiral blue/beige #67

05-04-2010	#25
scholtmj Join Date: Nov 2008 Location: Grand Rapids, MI Posts: 382	Re: My first plenum pull! I'd be scared to drive that work of art!

05-04-2010	#26
A26B Join Date: Dec 2003 Location: Arcadia, OK Posts: 3,392	Re: My first plenum pull! Looks great! You're now an accomplished pro! __________________ Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 *ZR-1*, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed.

05-04-2010	#27
iliad427 Join Date: Mar 2004 Location: Syracuse, NY Posts: 38	Re: My first plenum pull! Great job!

05-05-2010	#28
rudolph schenker Join Date: Jun 2009 Location: utah Posts: 128	Re: My first plenum pull! Thanks for the compliments and also thanks to those on this forum for all the information and help! __________________ 1994 ZR-1 Admiral blue/beige #67

05-05-2010	#30
Paul Workman Join Date: Nov 2007 Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri Posts: 6,466	Re: My first plenum pull! WooHoo!! Thatz beautymuss!!! Nice...Very nice! P.