Pre production ZR-1/King of Hill Pictures

[Blue Flame Restorations]

Eric, I have #223.
Vin #029 is MM 0421 CZA 223, according to your data. Thanks for pointing me in the right direction!

Next on the list, Phase I and Phase II motors for display purposes only.

Side of block


Plenum

[1989ZR1#74]

Originally Posted by Blue Flame Restorations

Looks like my 58 in marker stands for Active. Where on the plenum and which side of the block above the oil pan?

Brett could it be a part of this number:



1K58 =

K = 1989
58 = ZR-1

[Blue Flame Restorations]

Originally Posted by 1989ZR1#74

Brett could it be a part of this number:



1K58 =

K = 1989
58 = ZR-1

It's in blk marker on the rear RH flange.

I'll check the rest of the numbers today

[Tyler Townsley]

Originally Posted by Blue Flame Restorations

It's in blk marker on the rear RH flange.

I'll check the rest of the numbers today

K58 on the block no vin durative on the block, the plenum has 223.

I have a Phase 1 short block and the first motor from Queenie is yours if you want it, includes the engine build book.

Tyler

[Blue Flame Restorations]

Originally Posted by Tyler Townsley

K58 on the block no vin durative on the block, the plenum has 223.

I have a Phase 1 short block and the first motor from Queenie is yours if you want it, includes the engine build book.

Tyler

You do know that I love you. LOL Of course, I want them both!!!!!!!!!!!!!!!

My goal is to display the following LT5's on custom stands, all cleaned up and pretty.

PhaseI--- PhaseII--- Active LT5--- Production LT5

I'll only have to get one more production LT5. My extra is slated to go into the Convertible Shinoda car.

[1989ZR1#74]

Originally Posted by Blue Flame Restorations

You do know that I love you. LOL Of course, I want them both!!!!!!!!!!!!!!!

My goal is to display the following LT5's on custom stands, all cleaned up and pretty.

PhaseI--- PhaseII--- Active LT5--- Production LT5

I'll only have to get one more production LT5. My extra is slated to go into the Convertible Shinoda car.

Should look for a Phase III too. There is a lot of differences from III to IV.

Eric

[Blue Flame Restorations]

Originally Posted by 1989ZR1#74

Should look for a Phase III too. There is a lot of differences from III to IV.

Eric

PhaseIII an 89 production or Early 89 production?

[1989ZR1#74]

Originally Posted by Blue Flame Restorations

PhaseIII an 89 production or Early 89 production?

Phase IIIs were in the first 17 89 Pilots

[1989ZR1#74]

Actually your 223 is probably a Phase III. Based on the HOTB the first Phase IV was produced by MM on June 15th 1988. Check for any kind of casting date to see when #223 was created. Eric

[Corvettes White]

Originally Posted by 1989ZR1#74

Phase IIIs were in the first 17 89 Pilots

Eric, how do we know this? Tks, George