Beast #2 heads to Chicago! - Page 3 - ZR-1 Net Registry Forums

Karl · 06-24-2018

Quick photo of parts....drm brackets and stock shifter going to zf doc tomorrow for modifications (shifter only).

Modified oil catch can inlet line.

Karl · 07-10-2018

Things are moving along pretty well. I have the oil catch can installed and just about all the upgrades have arrived.

I need to pull the plenum and check the connecting harness to verify the ignition module is connected properly. Hopefully it is not and is a simple cure for the code 16. The prior owner pulled the plenum to replace the coils and I assume the distributor ignition system harness was not plugged up correctly.

Edit:

Dyno run #1

https://youtu.be/AM5IKagZhUQ

Dyno run #2

https://youtu.be/wEXI8TvDCiU

ZWILD1 · 07-12-2018

Congrats Karl on a truly unique story/history to this car. Justin sent me all the info as I was looking at it also and almost decided to buy it. I think of it as fate. It was destined to come your way. That and my wife made it clear she doesn't like yellow on any car. Personally I think the yellow looks cool. Justin said it was a Viper Yellow Metallic not sure how that looks verses the Competition Yellow GM painted the cars. Cool car though.

Karl · 07-12-2018

Quote:

Originally Posted by ZWILD1

Congrats Karl on a truly unique story/history to this car. Justin sent me all the info as I was looking at it also and almost decided to buy it. I think of it as fate. It was destined to come your way. That and my wife made it clear she doesn't like yellow on any car. Personally I think the yellow looks cool. Justin said it was a Viper Yellow Metallic not sure how that looks verses the Competition Yellow GM painted the cars. Cool car though.

Thank you for the kind words. The yellow looks like the yellow on the C4 Corvette. My favorite color is black but I like the yellow and it will do just fine.

Hopefully I will be able to beat or at least match Doug's best time in the car at the 1/4 mile soon.

Karl · 07-25-2018

Looks like the code 16 has been solved.

-=Jeff=- · 07-25-2018

just hope the pin doesn't break

Karl · 07-25-2018

Quote:

Originally Posted by -=Jeff=-

just hope the pin doesn't break

Fingers crossed!

This Z is cleaner than the black one I had. Hard to believe considering the miles.

Karl · 08-26-2018

Beast #2 secondaries are gone and 16 new fuel injectors have been installed along with the performance upgrades.

This car will spin the tires in second gear from a slow roll at 15+mph.

I have a few miscellaneous things to do.

So far so good.

Big thanks to Pete for working on the car.

I am mechanically inclined but have no where to work on the car and I don't like waiting!

1/4 mile times are next along with another update.

Drive your Z!

#notrailerqueenhere

Pete · 08-27-2018

Your welcome Karl.
Enjoy her.

Pete

Quote:

Originally Posted by Karl

Beast #2 secondaries are gone and 16 new fuel injectors have been installed along with the performance upgrades.

This car will spin the tires in second gear from a slow roll at 15+mph.

I have a few miscellaneous things to do.

So far so good.

Big thanks to Pete for working on the car.

I am mechanically inclined but have no where to work on the car and I don't like waiting!

1/4 mile times are next along with another update.

Drive your Z!

#notrailerqueenhere

XfireZ51 · 05-24-2019

Karl,

Just did an update to the catch can w the screen and steel wool. As for the inlet port, I had some rubber tubing that squeezes into the backside of the inlet. VERY tight fit. Don’t believe it’ll go anywhere.

06-24-2018	#21
Karl Join Date: May 2013 Location: Chicago Posts: 979	Re: Beast #2 heads to Chicago! Quick photo of parts....drm brackets and stock shifter going to zf doc tomorrow for modifications (shifter only). Modified oil catch can inlet line. __________________ 1993 ZR-1 #211 Yellow On Beige Beast #2 1992 ZR-1 #427 Black On Black Sold 1985 L98 Blue On Blue Sold Last edited by Karl; 06-24-2018 at 07:21 PM.

07-10-2018	#22
Karl Join Date: May 2013 Location: Chicago Posts: 979	Re: Beast #2 heads to Chicago! Things are moving along pretty well. I have the oil catch can installed and just about all the upgrades have arrived. I need to pull the plenum and check the connecting harness to verify the ignition module is connected properly. Hopefully it is not and is a simple cure for the code 16. The prior owner pulled the plenum to replace the coils and I assume the distributor ignition system harness was not plugged up correctly. Edit: Dyno run #1 https://youtu.be/AM5IKagZhUQ Dyno run #2 https://youtu.be/wEXI8TvDCiU __________________ 1993 ZR-1 #211 Yellow On Beige Beast #2 1992 ZR-1 #427 Black On Black Sold 1985 L98 Blue On Blue Sold Last edited by Karl; 01-05-2020 at 08:42 PM.

07-12-2018	#23
ZWILD1 Join Date: Aug 2004 Location: Spring Grove ,Pa. Posts: 256	Re: Beast #2 heads to Chicago! Congrats Karl on a truly unique story/history to this car. Justin sent me all the info as I was looking at it also and almost decided to buy it. I think of it as fate. It was destined to come your way. That and my wife made it clear she doesn't like yellow on any car. Personally I think the yellow looks cool. Justin said it was a Viper Yellow Metallic not sure how that looks verses the Competition Yellow GM painted the cars. Cool car though. __________________ 91 Turquoise Metallic Haibeck 525 #0134

07-25-2018	#25
Karl Join Date: May 2013 Location: Chicago Posts: 979	Re: Beast #2 heads to Chicago! Looks like the code 16 has been solved. __________________ 1993 ZR-1 #211 Yellow On Beige Beast #2 1992 ZR-1 #427 Black On Black Sold 1985 L98 Blue On Blue Sold

07-25-2018	#26
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,165	Re: Beast #2 heads to Chicago! just hope the pin doesn't break __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

08-26-2018	#28
Karl Join Date: May 2013 Location: Chicago Posts: 979	Re: Beast #2 heads to Chicago! Beast #2 secondaries are gone and 16 new fuel injectors have been installed along with the performance upgrades. This car will spin the tires in second gear from a slow roll at 15+mph. I have a few miscellaneous things to do. So far so good. Big thanks to Pete for working on the car. I am mechanically inclined but have no where to work on the car and I don't like waiting! 1/4 mile times are next along with another update. Drive your Z! #notrailerqueenhere __________________ 1993 ZR-1 #211 Yellow On Beige Beast #2 1992 ZR-1 #427 Black On Black Sold 1985 L98 Blue On Blue Sold

05-24-2019	#30
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,704	Re: Beast #2 heads to Chicago! Karl, Just did an update to the catch can w the screen and steel wool. As for the inlet port, I had some rubber tubing that squeezes into the backside of the inlet. VERY tight fit. Don’t believe it’ll go anywhere. __________________ [SIGPIC][/SIGPIC]Former Membership Chairman Former ZR-1 Registry - BOD 1972 Corvette 4speed base Coupe SOLD long time ago 1984 Corvette Z-51/4+3 SOLD 1992 Corvette ZR-1 Aqua/Gray #474 SOLD 1992 Corvette ZR-1 Black Rose/Cognac #458 2014 Honda VFR Interceptor DX Last edited by XfireZ51; 03-08-2024 at 03:09 PM.