Stainless brake hose for ZR-1

[Dynomite]

Originally Posted by Billy Mild

The J55 brakes are the one the stock ZR1 comes with.

Oh.......

The J55 are single piece rotors and the J55 Calipers are a bit smaller than the C5-Z06 Calipers as are the brake pads. I like the Two Piece Wilwood Rotors (Hats and Rotor) and the Wilwood Rotors are drilled for greater heat dissipation. The two pistons on the C5-Z06 Calipers may also be larger diameter.

These C5-Z06 Calipers will not clear stock Saw Blades but just clear A-Molds. On a 90' I had to shift the thin wheel weights to the slot of the spokes. On the 95' A-molds the thin wheel weights just clear the Calipers. The photo below is the 90' A-Molds where the wheel weights had to be moved to inside the spokes.

[DarkAngel]

with looooooot of delay, thanks everyone for all your answers
i've finally changed my brake hose this we and with the new banjo bolt, it fit perfectly

the pedal feel is better now
not as good as i would have excpected but it's ok