Raptor and Henderson Performance - Page 3 - ZR-1 Net Registry Forums

XfireZ51 · 09-11-2012

Ron,

BTW, I am in Vegas this week, leaving Thursday am. staying at The Paris for conference. Let me know if you can come over for a drink.

Dominic

tf95ZR1 · 09-11-2012

Quote:

Originally Posted by XfireZ51

Ron,
BTW, I am in Vegas this week, leaving Thursday am. staying at The Paris for conference. Let me know if you can come over for a drink.
Dominic

Dom, I think he's in Dubai or somewhere exotic like that.
Wow, I know the whereabouts of forum members better
than that of my own kids!

RHanselman · 09-12-2012

Yep, Dubai...

Scheduled to be back on the 27th...

RICKYRJ1 · 09-12-2012

Quote:

Originally Posted by RHanselman

Twin...

$10k for the base system.

I also have 18 LT1 Single Turbo systems. I'm going to mod one and then test it on both of my Ruby's. It may be perfect for a stock Z...

Cheers,
RH

What does the base system consist of? then also what would be above that if at all? 10k doesnt seem bad for that much power being added and assuming a safe reliable tune. what are you thinking HP #'s on the single set up? Hope this all works out for all parties envolved, it makes a great addition/option to our cars

A1990 · 09-12-2012

I would be that to be a low boost $$$$. You will need to redo your bottom end and lower the compression and while your in there...etc, etc. etc...

Not sure if the $10k includes labor of any kind...

RHanselman · 09-12-2012

Quote:

Originally Posted by RICKYRJ1

What does the base system consist of? then also what would be above that if at all? 10k doesnt seem bad for that much power being added and assuming a safe reliable tune. what are you thinking HP #'s on the single set up? Hope this all works out for all parties envolved, it makes a great addition/option to our cars

Off the top of my head...

The base system contains:
Stainless Steal Hot and cold pipes (CATs if needed)
Turbo's
Turbo Oiling system
Waste Gate
Blow-Off valve
Electric Harness
Hardware for the above

Options:
Intercooler
Exhaust Tips
Gages
Fuel Pump
Injectors
Raptor ECM
Headers

Right now, only option is to have Corey Henderson install the system. I think Ron said Corey is charging $1700 for the install but I could be a little off... I'll check again

The Single Turbo on a stock car should be around the same HP/TQ numbers as the stock dyno sheet above. Those numbers are from my stock 91 with twins pushing around 4 psi. All for around $5500...

RHanselman · 09-12-2012

Quote:

Originally Posted by A1990

I would be that to be a low boost $$$$. You will need to redo your bottom end and lower the compression and while your in there...etc, etc. etc...

Not sure if the $10k includes labor of any kind...

Yes, low boost. We think the max boost for a stock engine with the stock ECM should be no more than 5 psi. I believe Mat's car (single turbo on a stock engine) was running 6-8 psi and was getting 550HP but he eventually lost a head gasket. You'll have to ask him the specifics...

$10k does not include labor.

FYI - I'm using the stock crank and rods on my 374. The engine builder said the stock internals would good to 1000 HP. He did however perform some lightening and stress relieving on the rods. I believe all the engine work and parts for my 374 cost around $9500 even with Ron Woods Head Studs. The goal is to eventually up it to 15 psi...

Locobob · 09-13-2012

Arrrgggg! Really wish I had the money to do this, working and going to school part time isn't leaving me any extra cash to play with. I just love the sound of whooshing turbos!

RHanselman · 09-15-2012

Quote:

Originally Posted by Locobob

Arrrgggg! Really wish I had the money to do this, working and going to school part time isn't leaving me any extra cash to play with. I just love the sound of whooshing turbos!

I'm sure we can work out a Lay away plan... ;-)

USAFPILOT · 09-15-2012

law away sounds good...just lay the turbos in my trunk and I will pay you in a couple years.

09-11-2012	#21
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,704	Re: Raptor and Henderson Performance Ron, BTW, I am in Vegas this week, leaving Thursday am. staying at The Paris for conference. Let me know if you can come over for a drink. Dominic __________________ [SIGPIC][/SIGPIC]Former Membership Chairman Former ZR-1 Registry - BOD 1972 Corvette 4speed base Coupe SOLD long time ago 1984 Corvette Z-51/4+3 SOLD 1992 Corvette ZR-1 Aqua/Gray #474 SOLD 1992 Corvette ZR-1 Black Rose/Cognac #458 2014 Honda VFR Interceptor DX

09-12-2012	#23
RHanselman Join Date: Jul 2005 Location: Cresson, TX Posts: 970	Re: Raptor and Henderson Performance Yep, Dubai... Scheduled to be back on the 27th...

09-12-2012	#25
A1990 Join Date: Dec 2003 Location: Grand Island NE Posts: 1,512	Re: Raptor and Henderson Performance I would be that to be a low boost $$$$. You will need to redo your bottom end and lower the compression and while your in there...etc, etc. etc... Not sure if the $10k includes labor of any kind... __________________ Dennis Fierstein 90 ZR-1 #2562 Atomic-Z ZR-1 Net Registry Chairman of the Board ZR-1 Net Registry Treasurer

09-13-2012	#28
Locobob Join Date: Jan 2004 Location: Portland, OR Posts: 1,057	Re: Raptor and Henderson Performance Arrrgggg! Really wish I had the money to do this, working and going to school part time isn't leaving me any extra cash to play with. I just love the sound of whooshing turbos! __________________ Robert ZR-1 Net Registry Oregon State Director 91 ZR-1 #431 Black/Black LPE 368

09-15-2012	#30
USAFPILOT Join Date: Aug 2007 Location: Spring TX Posts: 1,348	Re: Raptor and Henderson Performance law away sounds good...just lay the turbos in my trunk and I will pay you in a couple years. __________________ 1994 #293 ZR-1 Stainless Works Long Tube Headers, B&B catback w/ X-Pipe, 18" Shelby Series One Wheels, SLP CAI.