02-18-2015 | #21 |
Join Date: Dec 2012
Location: Ponoka, Alberta, Canada
Posts: 158
|
Re: Starter or something else?
If the solenoid pull's in, that means the safety circuits have been satisfied.
The only reason the starter does not crank, is worn solenoid contacts. You can bypass this that or the other thing, But it all comes back to worn or eroded contact points. Pull the starter and replace the solenoid contact faces. Problem solved........
__________________
91 ZR-1 Arctic White/Gray 01 C-5 Magnetic Red/Black 85 FJ 1100 (Big Bore kit, Hooligan Bike) 05 FJR 1300 Yamaha (Long Distance, Sport Touring) And a whole whack of RC Planes |
02-18-2015 | #22 |
Join Date: Oct 2011
Location: Shalimar, FL
Posts: 192
|
Re: Starter or something else?
How do these contact points wear so much faster than every other starter on any other car
I have ever owned. Ours wearing at around 40K miles is way way early. Most every other car the starters are outside the block in the elements yet they last 100k+ miles. If its the heat what can we do to keep them cooler? |
02-18-2015 | #23 | ||
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,797
|
Re: Starter or something else?
Quote:
The contact points do not wear (burn) any faster on the LT5 as far as I know. Unless you have a starter with the poor windings or bad brushes or bad armature which is taking more current than it should to rotate. Or bad armature bearings or bad starter gear bearing. Or poor contact of the starter gear with the flywheel teeth. Or your valley drain is clogged and you pressure wash your engine. I always clean up the Solenoid contact points on the LT5 starters when I am there simply because it is so easy to do. I also always install the Starter Relay....again....simply because it is so easy to do. I also block TB Coolant at the injector housing simply because that makes removing the plenum so much easier and quicker...well.........you get the picture Oh.....I doubt heat is the issue for starter issues................just for starters Quote:
See Injector Housing TB Coolant Blocking I pulled two plenums at once in 30 minutes the other day just to replace a check valve and organize the vacuum lines identical on each engine just for the heck of it I also installed Jerry's New PCV Dual Hose, Connectors and Grommets on each engine eliminating all the Claptrap Nylon Ties and Claptrap screw clamps The Claptrap is not necessary on Jerry's New Hoses, Connectors and Grommets with their very nice tight/perfect fit on the PCV Valves and Tubing. See Six things I ALWAYS do on any LT5.
__________________
Left Clickable links -Solutions- LT5 Modifications/Rebuild Tricks Low Mileage ZR-1 Restoration 1990 Corvette (L98) Modifications LT5 Eliminated Systems LT5 Added Systems LT5/ZR-1 Fluids 1995 LT5 SPECIFIC TOP END REBUILD TRICKS Last edited by Dynomite; 02-20-2015 at 07:34 AM. |
||
02-18-2015 | #24 |
Join Date: Sep 2013
Location: Charlotte NC
Posts: 655
|
Re: Starter or something else?
|
02-18-2015 | #25 |
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,797
|
Re: Starter or something else?
2 deg a while ago.........LOL
At the moment it is minus 4 deg. Now that would cause starting issues I am sure to put this back on track But in CA.....it is near 70 deg. I pulled the Plenums in CA......LOL With TB Coolant Blocked at Injector Housings. See Injector Housing TB Coolant Blocking
__________________
Left Clickable links -Solutions- LT5 Modifications/Rebuild Tricks Low Mileage ZR-1 Restoration 1990 Corvette (L98) Modifications LT5 Eliminated Systems LT5 Added Systems LT5/ZR-1 Fluids 1995 LT5 SPECIFIC TOP END REBUILD TRICKS Last edited by Dynomite; 02-20-2015 at 07:37 AM. |
02-18-2015 | #26 |
Join Date: Sep 2013
Location: Charlotte NC
Posts: 655
|
Re: Starter or something else?
7 here in the am......we will be breaking a 100 year old record!
Man even the dogs don't wanna go out.... |
02-18-2015 | #27 |
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,700
|
Re: Starter or something else?
Heading to -9 here tonight w wind chill of -25F.
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman Former ZR-1 Registry - BOD 1972 Corvette 4speed base Coupe SOLD long time ago 1984 Corvette Z-51/4+3 SOLD 1992 Corvette ZR-1 Aqua/Gray #474 SOLD 1992 Corvette ZR-1 Black Rose/Cognac #458 2014 Honda VFR Interceptor DX |
02-19-2015 | #28 |
Join Date: Feb 2011
Location: San Marcos CA
Posts: 1,802
|
Re: Starter or something else?
Warmest winter in San Diego ever...Usually don't wear shorts until March. All my winter auto projects already done- switching to yard work mode...
|
02-19-2015 | #29 |
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,700
|
Re: Starter or something else?
Nice. Maybe you could chase a Tomcat taking off down the runway at sunset.
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman Former ZR-1 Registry - BOD 1972 Corvette 4speed base Coupe SOLD long time ago 1984 Corvette Z-51/4+3 SOLD 1992 Corvette ZR-1 Aqua/Gray #474 SOLD 1992 Corvette ZR-1 Black Rose/Cognac #458 2014 Honda VFR Interceptor DX |
02-19-2015 | #30 |
Join Date: Feb 2011
Location: San Marcos CA
Posts: 1,802
|
Re: Starter or something else?
|
|
|