![]() |
#21 |
![]() Join Date: Aug 2006
Location: McLean, VA
Posts: 3,712
|
![]()
Well, my 84 Z51, jack handle/lug wrench was, if I recall correct and maybe not, was on top of the radiator shroud.
My 91 and 94 (most likely true for 92, 93 and 95) had the jack handle/ lug wrench behind the passenger seat but could be relocated behind the driver seat as well since seat track rear mounting studs are long enough for wing nuts to secure wrench brackets. Them Corvette engineers had a lot of fun moving it around inside the car. ![]() |
![]() |
![]() |
![]() |
#22 |
![]() Join Date: Aug 2006
Location: McLean, VA
Posts: 3,712
|
![]()
I checked my owner?s manual and jack handle storage is behind the driver?s seat. I must have relocated it to passenger seat track just to be different.
|
![]() |
![]() |
![]() |
#23 |
![]() Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,067
|
![]()
Glad to hear it. That means I am not losing my marbles after all and at least a small part of my memory is still intact.--Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z" 1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts --Sold but still running strong 1993 Quasar Blue #161 "HIL KING" --Sold but still running strong, now with more than 120,000 miles 1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd --Sold a long time ago ZR-1 Net Registry Founding Member #95 NCM Lifetime Member Favorite Quote--Attributed to Mickey Thompson: "Too Much Horsepower is Almost Enough" |
![]() |
![]() |
![]() |
#24 |
![]() Join Date: Jul 2016
Location: Harrodsburg, KY
Posts: 411
|
![]() |
![]() |
![]() |
![]() |
#25 |
![]() Join Date: Aug 2006
Location: McLean, VA
Posts: 3,712
|
![]() |
![]() |
![]() |
![]() |
#26 |
![]() Join Date: Aug 2010
Location: ottawa canada
Posts: 156
|
![]()
Secondchance: Your Memory is intact. Jack handle storage is behind drivers seat.
I'm the only owner of MY 90 purchased April 1990. Jack never used-handle never disturbed , still in original place. Cheers:Bill (geezer) |
![]() |
![]() |
![]() |
#27 |
![]() Join Date: Mar 2023
Location: PA
Posts: 64
|
![]()
My 90 had none of that but the way spork 2367 has it is the exact way it should be on a 90. I rewrapped my bag with another type bag just in case. I found all the missing parts on ebay. Every later yr there are some slight variations. The safety labeling on the jack, the packaging with Styrofoam etc.
|
![]() |
![]() |
![]() |
#28 |
![]() Join Date: Aug 2006
Location: McLean, VA
Posts: 3,712
|
![]()
Original spare would be necessary for NCRS judging but would you feel safe to actually use it? Unless, the spare was replaced recently.
I had to squeeze in 18" spare off of Cadillac CTS-V to clear my 14" Wilwood and Wilwood Narrow Superlite calipers. |
![]() |
![]() |
![]() |
#29 |
![]() Join Date: May 2022
Location: Georgia
Posts: 78
|
![]()
on the 1993 ZR1 the lug nut wrench is behind the drivers seat. The spare tire, Jack, and spare tire bag is in the rear spare tire tray with the spare tire .. the lug nut wrench fits the nut/bolt that holds the spare tire tray in place..
|
![]() |
![]() |
![]() |
|
|