1990 ZR-1 FS or Parts

[shawn8492]

Originally Posted by Pete

Shawn most of the exhaust is welded.
I can cut it for shipping.
If you can pick up give me $100 if i need to cut and box it for shipping $200

Let me know.
Pete

Pete,
Just a few questions, I assume it would be cutting at each muffler would there also be a cut in the middle? It is Borla, is that correct? Any idea on shipping cost?
Thanks,
Shawn

[Pete]

Originally Posted by shawn8492

Pete,
Just a few questions, I assume it would be cutting at each muffler would there also be a cut in the middle? It is Borla, is that correct? Any idea on shipping cost?
Thanks,
Shawn

The mufflers have clamps should be able to disconnect mufflers the rest of the exhaust is welded.
It would probably be cheaper to ship in a couple smaller lighter boxes.

I dont know how much shipping would be i know the exhaust weighs about 60lbs.

Pete

[Pete]

Originally Posted by RICKYRJ1

49th street Rockers for sale?

Yes,
They need some work underneath it does not show when installed.
$275 plus shipping

Pete

[jrd1990zr1]

Hi Pete,

Followup to my PMs. Sorry to be a pain.

Was wondering if you had got to the HVAC Programmer and the blend door actuator yet? I've got my 1990 pulled apart and have been working with Jim Voter to diagnose the problem. I could really use a working HVAC programmer and actuator to test my car's HVAC system.

Thanks, John

[ghlkal]

PM sent regarding FX-3 controller ...

[Pete]

Hi John
I will be pulling the car inside next week to strip her down to the bone.

Pete

Originally Posted by jrd1990zr1

Hi Pete,

Followup to my PMs. Sorry to be a pain.

Was wondering if you had got to the HVAC Programmer and the blend door actuator yet? I've got my 1990 pulled apart and have been working with Jim Voter to diagnose the problem. I could really use a working HVAC programmer and actuator to test my car's HVAC system.

Thanks, John

[Pete]

Plenum & Injector Housings
I reported them to my standards a real 36mm.
36mm gauge ball drops thru (primary)

On the Plenum the divider was removed from previous person who ported the plenum i port matched everything.

Put this set on your Z and gain 35-45 hp.

$1500 + 2 hours = 35-45hp

Can also port heads for a package deal.

Pete

[G8nightman]

How much with the heads?


Sent from my iPhone using ZR-1 Net Registry

[Pete]

Heads are not ported.
I will port heads if there is interest.

Package price $4000 for the ported heads and intake.

These are outright prices.
No exchange.

Pete

Originally Posted by G8nightman

How much with the heads?


Sent from my iPhone using ZR-1 Net Registry

[jrd1990zr1]

Originally Posted by Pete

Hi John
I will be pulling the car inside next week to strip her down to the bone.

Pete

Thanks Pete,

Besides the AC programmer and blend door actuator I may also want the HVAC control head. I assume the HVAC worked before the part out and in communicating with Jim, I think having all of the components may be the best way to go.

Thanks again, John