ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 02-20-2013   #21
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
Default Re: GM to revive LT5 name

Quote:
Originally Posted by Kevin View Post
there's only a handful of people who know what the lt5 is. lt1 lt4 l88, which gm recently trademarked again, zl1 these are known.
Its generational. A lot of corvette fans know of the LT5 and the ZR-1 espicially if they were in the teens and twenties in the late 80s and 90s.

Prob the same number of people who knew what a Nickey, Grumpy, Yenko Camaro were back in the day and yes the ZL1

Younger folks not so much....
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)

GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V

Last edited by GOLDCYLON; 02-20-2013 at 03:20 PM.
GOLDCYLON is offline   Reply With Quote
Old 02-20-2013   #22
Kevin
 
Kevin's Avatar
 
Join Date: Jun 2005
Location: pittsburgh
Posts: 4,632
Default Re: GM to revive LT5 name

yenko is a honda dealer now. makes me suicidal every time i see a yenko honda plate frame. Friend of mine used to work for yenko chevy, she had some awesome stories
__________________
It's not the car, it's the people - Doug Johnson
90 r/r "KEYS ON" nick named "T.L.B"
Kevin is offline   Reply With Quote
Old 02-20-2013   #23
Hog
 
Join Date: Jul 2010
Location: Woodstock, Ontario, Canada
Posts: 1,275
Default Re: GM to revive LT5 name

One good thing about GM's use of cylinder deactivation (DOD then AFM) is that it forces the displacement of a V8 engine to stay higher.
That is one of the reasons why the C7 Vette's GEN 5 engine is 6.2 liters and not 5.5 liters. The smaller displacement V8 did not meet GM's criteria for torque while in 4 cylinder mode.
GM re-arranging the cylinder head port orientation has allowed the use of conventional rocker arms instead of the offest rocker arms which are used in the LS7,LSA,LS9,LS3,L99,L92 and the rest of the GEN 4 engines.

GM's new truck V6(LV3) is still 4.3 liters in displacement and will feature DI, VVT and AFM. But instead of dropping from 6 tp 3 cylinders while the Adjustable Fuel Management is engaged, it will drop down to V4 mode. This will provided enough hot exhaust gasses for proper catalyst function on BOTH exhaust banks. Dropping to 3 cylinders would not.

Honda has a V6 that has a 6 cylinder, 4 cylinder AND 3 cylinder mode. The V6 switches between 3 or 4 cylinders in order to keep both cats hot.
The 2014 GM trucks retain the 6.2(L86) and 5.3(L83) liter engine as well as the 4.3 engine, but will drop the 4.8 size. So it appears that GM's GEN V engines will use the letter "L" across the board in the cars and trucks.

peace
Hog
Hog is offline   Reply With Quote
Old 02-20-2013   #24
mgg
 
Join Date: Aug 2009
Location: Hamilton, Va.
Posts: 113
Default Re: GM to revive LT5 name

I have read form multiple sources that L88 is being kicked around a lot lately. It would certainley be a historical nameplate to resurect and I am confident that if chosen the car would be deserving. As far as cylinder deactivation goes, I have it on my Suburban and it works great. That huge vehicle is averageing about 17 mpg and on the highway with five people and luggage is getting around 20 mpg doing 75 mph. Quite impressive if you ask me. As far as Gm developing anothe double overhead cam motor with a high level of performance, I think that is out of the question. Packaging, weight, would be two huge reasons that will never happen. Yesterday, I sat down are re read a large portion of " The Heart of the Beast". I hope they never do try this again. I just think it is just incredible what was accomplished. I get the warm and fuzzies reading this book and know what a significant historical car the ZR-1 really is. It is unquestionably the greatest developemental story of any Corvette and the passion and drive it took to deliver this car is unmatched. Makes me feel VERY lucky to own one of the remarkable cars and to be able to drive and enjoy a peice of automotive history
mgg is offline   Reply With Quote
Old 02-20-2013   #25
USAFPILOT
 
USAFPILOT's Avatar
 
Join Date: Aug 2007
Location: Spring TX
Posts: 1,348
Default Re: GM to revive LT5 name

My Pontiac G8 GT has the 6.0L L76 engine with the DoD tech. It drops to 4 cylinders and gets about 27MPG using 87 Octane on the freeway. It is 4000lb car too. It still makes 361HP, which gets the job done on a daily driver and has not had one hiccup since I bought it new. The reliability of cylinder deactivation is there now. It is also in most of the trucks GM produces now.

I saw the new Chevy SS will get the LS3, but in order for me to trade in the G8 it will need to eventually get the LS1 with the 450HO and gas saving technology. When you drive 110 miles a day it is nice to be in a fast comfortable car, but also one that can sip fuel.
__________________
1994 #293 ZR-1 Stainless Works Long Tube Headers, B&B catback w/ X-Pipe, 18" Shelby Series One Wheels, SLP CAI.
USAFPILOT is offline   Reply With Quote
Old 02-20-2013   #26
XfireZ51
 
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,702
Default Re: GM to revive LT5 name

Really like the G8!
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman
Former ZR-1 Registry - BOD
1972 Corvette 4speed base Coupe SOLD long time ago
1984 Corvette Z-51/4+3 SOLD
1992 Corvette ZR-1 Aqua/Gray #474 SOLD
1992 Corvette ZR-1 Black Rose/Cognac #458
2014 Honda VFR Interceptor DX
XfireZ51 is offline   Reply With Quote
Old 02-20-2013   #27
Paul Workman
 
Paul Workman's Avatar
 
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
Default Re: GM to revive LT5 name

Quote:
Originally Posted by Hib Halverson View Post
I can't help but to think that speaks volumes about Coyote-powered Mustangs.
Ummmm.... Not sure its not apples and oranges.

The Coyote is a 5.0L making 412 peak net pulling a 3723# Mustang GT

The C6 LS3 is a 6.2L making 430 peak net pulling a 3208# car.

Now for some very interesting numbers check out the 4.5L Farrari in the 458, and then let's talk about engine architecture...

P.
__________________
Good carz, good food, good friendz = the best of timez!

90 #1202
"FBI" top end ported & relieved
Cam timing by "Pete the Greek"
Sans secondaries
Chip & dyno tuning by Haibeck Automotive
SW headers, X-pipe, MF muffs

Former Secretary, ZR-1 Net Registry

Last edited by Paul Workman; 02-20-2013 at 11:17 PM. Reason: typo
Paul Workman is offline   Reply With Quote
Old 02-20-2013   #28
USAFPILOT
 
USAFPILOT's Avatar
 
Join Date: Aug 2007
Location: Spring TX
Posts: 1,348
Default Re: GM to revive LT5 name

I wonder why Ferrari engines get such terrible fuel economy, when a 662HP Ford can get in the mid 20's with a heavier car.
__________________
1994 #293 ZR-1 Stainless Works Long Tube Headers, B&B catback w/ X-Pipe, 18" Shelby Series One Wheels, SLP CAI.
USAFPILOT is offline   Reply With Quote
Old 02-21-2013   #29
Fully Vetted
 
Fully Vetted's Avatar
 
Join Date: Sep 2012
Location: Rockwall, Tx
Posts: 1,510
Default Re: GM to revive LT5 name

Quote:
Originally Posted by LancePearson View Post

...The cylinder deactivation technology sounds good but not to be a wet blanket....when they had it in Caddy's it didn't last and wasn't that great.
Quote:
Originally Posted by Hog View Post
One good thing about GM's use of cylinder deactivation (DOD then AFM) is that it forces the displacement of a V8 engine to stay higher.
That is one of the reasons why the C7 Vette's GEN 5 engine is 6.2 liters and not 5.5 liters. The smaller displacement V8 did not meet GM's criteria for torque while in 4 cylinder mode.
GM re-arranging the cylinder head port orientation has allowed the use of conventional rocker arms instead of the offest rocker arms which are used in the LS7,LSA,LS9,LS3,L99,L92 and the rest of the GEN 4 engines.

GM's new truck V6(LV3) is still 4.3 liters in displacement and will feature DI, VVT and AFM. But instead of dropping from 6 tp 3 cylinders while the Adjustable Fuel Management is engaged, it will drop down to V4 mode. This will provided enough hot exhaust gasses for proper catalyst function on BOTH exhaust banks. Dropping to 3 cylinders would not.

Honda has a V6 that has a 6 cylinder, 4 cylinder AND 3 cylinder mode. The V6 switches between 3 or 4 cylinders in order to keep both cats hot.
The 2014 GM trucks retain the 6.2(L86) and 5.3(L83) liter engine as well as the 4.3 engine, but will drop the 4.8 size. So it appears that GM's GEN V engines will use the letter "L" across the board in the cars and trucks.

peace
Hog
Quote:
Originally Posted by mgg View Post

...As far as cylinder deactivation goes, I have it on my Suburban and it works great. That huge vehicle is averageing about 17 mpg and on the highway with five people and luggage is getting around 20 mpg doing 75 mph. Quite impressive if you ask me.
Quote:
Originally Posted by USAFPILOT View Post
My Pontiac G8 GT has the 6.0L L76 engine with the DoD tech. It drops to 4 cylinders and gets about 27MPG using 87 Octane on the freeway. It is 4000lb car too. It still makes 361HP, which gets the job done on a daily driver and has not had one hiccup since I bought it new. The reliability of cylinder deactivation is there now. It is also in most of the trucks GM produces now.
Yeah, this is is not the old 4-6-8 of the old Caddy's. That was a great idea followed by a horrible execution. I'm sure they learned a lot from that fiasco which is probably why they now have it pretty much figured out.
__________________
_________________

1994 AB/Grey #141

430 RWHP/392 RWTQ

FBI Lyposuction / Secondaries relieved of duty / SW Long Tube Headers / Corsa Exhaust / FIC SS Injectors / MSD Coils / Lightweight Pulleys / Corey tuned
B & M Shifter / Aluminum Flywheel / Samco Hoses / Shelby Series One's / C4 No Flex Frame Stiffener

BBC - Bling By Carter:
Custom ZR-1 Center Caps / Custom Plenum Plate / Air Box Knobs / TB Cover / Oil Filter Cover
Fully Vetted is offline   Reply With Quote
Old 02-21-2013   #30
Fully Vetted
 
Fully Vetted's Avatar
 
Join Date: Sep 2012
Location: Rockwall, Tx
Posts: 1,510
Default Re: GM to revive LT5 name

Quote:
Originally Posted by Paul Workman View Post

...Now for some very interesting numbers check out the 4.5L Farrari in the 458, and then let's talk about engine architecture...
Another very close match for the 458 engine is the Lexus LFA V10.


Displacement –

LFA – 4.8L V10
458 – 4.5L V8


HP –

LFA - 562 @ 8700 rpm
458 - 562 @ 9000 rpm

Following info taken from LeftLanenews.com and Automobile-Catalog.com:

LFA –

4.8-liter V10 developed exclusively for use in the high-dollar supercar. Power is rated at 562 horsepower and 354 lb-ft of torque. Although maximum twist doesn't come on until the needle sweeps past the 6,800rpm mark, Toyota says that 90 percent of the LFA's torque is available between 3,700rpm and the screaming 9,000rpm redline.



458 –

4.5-liter V8 cranks out 562 horsepower at 9,000 rpm (125 horsepower per liter, a record for naturally-aspirated piston engines). Torque is rated at 398 lb-ft at 6,000 rpm, 80 percent of which is available from 3,250 rpm.

Across the board it still looks like the 458 engine wins in all aspects but it is very close. And you would not believe the screaming wail that comes out of the LFA's V10. It absolutely sounds just like an F1 car. The LFA revs so fast they had to use a digital tach because a conventional one would not sweep fast enough. It revs from idle to redline at 9000 rpm in astonishing .67 secs!

I think these are two of the greatest engines on the planet.
__________________
_________________

1994 AB/Grey #141

430 RWHP/392 RWTQ

FBI Lyposuction / Secondaries relieved of duty / SW Long Tube Headers / Corsa Exhaust / FIC SS Injectors / MSD Coils / Lightweight Pulleys / Corey tuned
B & M Shifter / Aluminum Flywheel / Samco Hoses / Shelby Series One's / C4 No Flex Frame Stiffener

BBC - Bling By Carter:
Custom ZR-1 Center Caps / Custom Plenum Plate / Air Box Knobs / TB Cover / Oil Filter Cover
Fully Vetted is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:08 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020