ROZA NERO Interior Conversion - Page 3 - ZR-1 Net Registry Forums

Karl · 10-13-2013

Nice work Dominick!

-=Jeff=- · 10-13-2013

C5 shift knob will work just use your insert

XfireZ51 · 10-13-2013

Quote:

Originally Posted by -=Jeff=-

C5 shift knob will work just use your insert

The gray knob I have now is from a C5.

Schrade · 10-13-2013

Quote:

Originally Posted by XfireZ51

Pulled the trigger on a Willcox carpet sale this weekend. Rear compartment stuff should be here next week, so I can start removing seats, footwell, and console carpet.
Anybody need any black interior parts, I have door panels in good condition so far. Will post other parts as they become available.

Does anyone recover the eBrake handle? Would really like to do the Jano SW.

I need the black section that fits the 'wall' behind the seats. You holding there Dominic?

Any problem with the door panel(s) fit?

XfireZ51 · 10-13-2013

Quote:

Originally Posted by Schrade

I need the black section that fits the 'wall' behind the seats. You holding there Dominic?

Any problem with the door panel(s) fit?

OK. You need the riser then. I'll let you know what condition its in.

XfireZ51 · 10-21-2013

OK. Here's an update. First of all, Bob Demarco was good enough to give Pete and I a lesson in cleaning carpet. Some pics of the cleaned footwells. Cleaned up pretty nicely IMO. Can't do much about the red dye but its on the driver's side rear interior corner, so nobody will ever really see it. I got this from either Schrade or Scrrem and believe it has about 37k miles on it.
So I guess I am back to looking for rear carpet w seat riser.

Now here is a contrast between the OEM carpet shown above and the rear carpet I bought from Willcox. Needless to say, its going back. Carpet actually came in an ACC box and Willcox is working out the return. Hope to hear back soon.The tint is wrong and you couldn't say its because the footwell is bleached out from the sun.
I don't like the binder on the hatch floor carpet and the wheelhouse carpet is not cut for speakers.

Scrrem · 10-21-2013

Dominic,
Those carpets never looked that good in my car!! We need to get Robert to give an online carpet cleaning course!!
Rich

XfireZ51 · 10-21-2013

Quote:

Originally Posted by Scrrem

Dominic,
Those carpets never looked that good in my car!! We need to get Robert to give an online carpet cleaning course!!
Rich

That's the idea! Figure I could do the same for the hatch pieces as well.

Schrade · 10-21-2013

Looks fine.

I ran my '94 carpet to the car wash (PO was a

). Stuff was like Chia-carpet. Seeds and water would have made for a good yield. Or a Petri-dishrag.

I had already scrubbed them on the deck. Looked good, but left with too much soap. Took them to the car wash for that, and couldn't believe what washed out. You would NOT have known it from new.

Long as your riser section is hole-free, I think I can work with yours there Dom.............

cvette98pacecar · 10-21-2013

I am going to try and do a Detailing course for every part of our cars. The first course is Carpet Cleaning 101. I am hoping to have it in the next heart of the beast.
I want another shot at that red next season. I am sure I can get most of it out.

10-13-2013	#21
Karl Join Date: May 2013 Location: Chicago Posts: 979	Re: ROZA NERO Interior Conversion Nice work Dominick! __________________ 1993 ZR-1 #211 Yellow On Beige Beast #2 1992 ZR-1 #427 Black On Black Sold 1985 L98 Blue On Blue Sold

10-13-2013	#22
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,168	Re: ROZA NERO Interior Conversion C5 shift knob will work just use your insert __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

10-21-2013	#26
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,705	Re: ROZA NERO Interior Conversion OK. Here's an update. First of all, Bob Demarco was good enough to give Pete and I a lesson in cleaning carpet. Some pics of the cleaned footwells. Cleaned up pretty nicely IMO. Can't do much about the red dye but its on the driver's side rear interior corner, so nobody will ever really see it. I got this from either Schrade or Scrrem and believe it has about 37k miles on it. So I guess I am back to looking for rear carpet w seat riser. Now here is a contrast between the OEM carpet shown above and the rear carpet I bought from Willcox. Needless to say, its going back. Carpet actually came in an ACC box and Willcox is working out the return. Hope to hear back soon.The tint is wrong and you couldn't say its because the footwell is bleached out from the sun. I don't like the binder on the hatch floor carpet and the wheelhouse carpet is not cut for speakers. __________________ [SIGPIC][/SIGPIC]Former Membership Chairman Former ZR-1 Registry - BOD 1972 Corvette 4speed base Coupe SOLD long time ago 1984 Corvette Z-51/4+3 SOLD 1992 Corvette ZR-1 Aqua/Gray #474 SOLD 1992 Corvette ZR-1 Black Rose/Cognac #458 2014 Honda VFR Interceptor DX Last edited by XfireZ51; 10-21-2013 at 04:35 PM.

10-21-2013	#27
Scrrem Join Date: Feb 2009 Location: Alexandria, Virginia Posts: 1,467	Re: ROZA NERO Interior Conversion Dominic, Those carpets never looked that good in my car!! We need to get Robert to give an online carpet cleaning course!! Rich __________________ 1990 Bright Red Coupe #608 380 Stroker, Ported Heads/Intake/Housings/TB Haibeck Secondary Delete Chip / Pete's Cams George Braml Intake / FIC Injectors Coated SW Headers / Corsa Bill Boudreau B/B ZF6 / Viper 4.10 gears Ron Davis Radiator Pioneer AVIC-Z140BH NAV Fikse FM5's 285 / 335 / C6 Brakes WAZOO Member

10-21-2013	#29
Schrade Join Date: Dec 2012 Location: NC Posts: 1,786	Re: ROZA NERO Interior Conversion Looks fine. I ran my '94 carpet to the car wash (PO was a ). Stuff was like Chia-carpet. Seeds and water would have made for a good yield. Or a Petri-dishrag. I had already scrubbed them on the deck. Looked good, but left with too much soap. Took them to the car wash for that, and couldn't believe what washed out. You would NOT have known it from new. Long as your riser section is hole-free, I think I can work with yours there Dom............. __________________ I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads... ( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b] Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc... 1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3" [IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG] Last edited by Schrade; 10-21-2013 at 08:37 PM.

10-21-2013	#30
cvette98pacecar Join Date: May 2011 Location: Sydney, Australia Posts: 2,479	Re: ROZA NERO Interior Conversion I am going to try and do a Detailing course for every part of our cars. The first course is Carpet Cleaning 101. I am hoping to have it in the next heart of the beast. I want another shot at that red next season. I am sure I can get most of it out. __________________ Robert J. DeMarco [SIGPIC][/SIGPIC] [COLOR=blue]G[/COLOR][COLOR=red]rand[/COLOR] [COLOR=blue]S[/COLOR][COLOR=red]port[/COLOR] Registry Lifetime Member NCM Lifetime Member #2655 Pacecar Registry Member [COLOR=red]ZOOM Charter Member - ZR-1 Owners of Michigan[/COLOR] [COLOR=plum][I]ZR-1[/I] Registry member since 2012 [/COLOR] [COLOR=black]1990 LPE "368" Aerobody ZR-1, Last ZR-1 built by John[/COLOR] 1991 Callaway Aerobody ZR-1, DRM 500 1991 Shinoda Aerobody Spyder, 1998 Pace Car