Need some clutch help - Page 2 - ZR-1 Net Registry Forums

Kb7tif · 06-17-2009

It sounds like a hydraulic problem now not a trans drop, the clutch master can be fun as well, I will leave it to these guys about it. there is all the info you need on the 2 forums. The Slave is on ebay from partsladi (which is a chevy parts dept by the way) and im sure they have the clutch master as well and they have a 2 year warrantee on their parts.
If you need some tips on a trans swap i can give you some time saving tips, you can have it out in less then a hour after a while

bldavis11 · 06-17-2009

KB,

I don't visit CF any longer due to things that went down over there several months ago. They're not getting my traffic, especially after the way some of OUR members were treated after the new mods took over (post sale to the internet brands company) Case closed.

I'll have a chance this weekend to dig through my FSM and figure out this inspection plate thing.

rkreigh · 06-18-2009

if you end up pulling the clutch do yourself a favor and put the c beam back with some Bill B beam plates

I have a few sets and they make mounting the c beam easier, and stiffen up the mounting points to help the car keep from "stepping out" from the rear diff torq and differential loads on the tires

they work. pm or email me if you need a set, bill gives me a bit of a discount that I pass on.

06-17-2009	#11
Kb7tif Join Date: May 2009 Location: S Nevada Posts: 352	Re: Need some clutch help It sounds like a hydraulic problem now not a trans drop, the clutch master can be fun as well, I will leave it to these guys about it. there is all the info you need on the 2 forums. The Slave is on ebay from partsladi (which is a chevy parts dept by the way) and im sure they have the clutch master as well and they have a 2 year warrantee on their parts. If you need some tips on a trans swap i can give you some time saving tips, you can have it out in less then a hour after a while __________________ 1995 Convertible Supercharged Auto 1974 454 550hp (avatar car) On the blocks- -Scharger install ! 1992-Zr-1 Sold. Watson Headers Ported Plenum, Housings Random tech cats Fidanza Flywheel Chipped, Relocated Mat Woods 165 stat Borlas, Straights 1996 Lt4 Sold 1994 Lt1 Sold 2004 Z06 Sold AKA** Illenema

06-17-2009	#12
bldavis11 Join Date: Mar 2006 Location: Portsmouth, VA Posts: 245	Re: Need some clutch help KB, I don't visit CF any longer due to things that went down over there several months ago. They're not getting my traffic, especially after the way some of OUR members were treated after the new mods took over (post sale to the internet brands company) Case closed. I'll have a chance this weekend to dig through my FSM and figure out this inspection plate thing.

06-18-2009	#13
rkreigh Join Date: Jan 2004 Location: Alex VA Posts: 1,087	Re: Need some clutch help if you end up pulling the clutch do yourself a favor and put the c beam back with some Bill B beam plates I have a few sets and they make mounting the c beam easier, and stiffen up the mounting points to help the car keep from "stepping out" from the rear diff torq and differential loads on the tires they work. pm or email me if you need a set, bill gives me a bit of a discount that I pass on. __________________ 95 390 LPE ZR1 (505 rwhp) LSV = Lingenfelter Super Vette Twin Turbo 2003 Z06 (800 RWHP)