440 CI update? - Page 2 - ZR-1 Net Registry Forums

Bob G · 12-17-2008

No Body would make the liners They Said The Block Was to week, So we used a set of Blanks had them machined by a cnc shop They made blue prints of the sleves Then To save a step we sent them to darton to have them made again turned down. they would have to buy new tooling to make the water holes in the flanges, Not cost effective they told us.
Now we have a cnc program written.

Next the block Went To Another Cnc Shop To be Machined for the sleves with a .0015 Press fit Top & Bottom.
Then Back to the engine shop To be bored & honed to fit pistons, & check Crank line bore to see if anything moved, It didn't
Now I Will Assemble It And Be Ready For BG
Bob G

Polo-1 · 01-06-2009

Is it a complete bottom end yet? pictures

Bob G · 01-06-2009

almost I Broke A Second Ring Putting It Together But I Have Been Taking Pictures As Soon As I Can Get My Wife To Post Them I Will
Bob G

Paul Workman · 01-07-2009

Quote:

Originally Posted by Bob G

almost I Broke A Second Ring Putting It Together But I Have Been Taking Pictures As Soon As I Can Get My Wife To Post Them I Will
Bob G

Once you "pathfinders" have blazed a trail thru the CNC programming and parts sources...I'm very curious to hear what the prevailing $$ tag is going to be for tossin' a set of sleeves an buckets in to our LT5s is going to be? I thought I read somewhere that a conversion (depending on needing a crank, etc,) might be well under $10k?? THAT would put a lot of us over to the "dark side" for sure!!

P.

Polo-1 · 01-07-2009

current "440" 4.100/.125 bore blocks are from $6,500 to $13,500

This is the range I have heard from the 3 big bore guys, This is only the block and sleeve work. You must have the bucks and will to go this route. As the cost for the rest of your stroker is added into from the price above.

diamond zr1 · 01-07-2009

Polo-1 /just stick with 402 and turbo it.If the lt5@ 402 runs anything like my ls2 @ 402 turbo you will love it.I would like to see a lt5 turbo.If I ever take my 368 down,it will get turbos. joe

Polo-1 · 03-04-2009

How is the build going, any news.

ALZR1 · 03-04-2009

441 update motor is assembled,and cams are tuned. i'm waiting for my plenum
to come back from the powder coater.Hopefully by next week i'll have it running.I also took A bunch of pics that i'll post soon.

Al.008.JPG[ATTACH][ATTACH]011(2).JPG[/ATTACH][/ATTACH]012.JPG

rkreigh · 03-06-2009

sweet! we just need to get nelson or somebody to step up and make a cnc billet block to allow these big bore deals

13,500 to mod the block is a bit much.

who was the "big guy" who would do it for 6,500

pretty big price range!!

Polo-1 · 04-11-2009

Word on the street is the 440 is running.

AL

12-17-2008	#11
Bob G Join Date: Dec 2005 Location: Huntley IL Posts: 170	Re: 440 CI update? No Body would make the liners They Said The Block Was to week, So we used a set of Blanks had them machined by a cnc shop They made blue prints of the sleves Then To save a step we sent them to darton to have them made again turned down. they would have to buy new tooling to make the water holes in the flanges, Not cost effective they told us. Now we have a cnc program written. Next the block Went To Another Cnc Shop To be Machined for the sleves with a .0015 Press fit Top & Bottom. Then Back to the engine shop To be bored & honed to fit pistons, & check Crank line bore to see if anything moved, It didn't Now I Will Assemble It And Be Ready For BG Bob G

01-06-2009	#12
Polo-1 Join Date: Sep 2005 Location: Washington Posts: 955	Re: 440 CI update? Is it a complete bottom end yet? pictures

01-06-2009	#13
Bob G Join Date: Dec 2005 Location: Huntley IL Posts: 170	Re: 440 CI update? almost I Broke A Second Ring Putting It Together But I Have Been Taking Pictures As Soon As I Can Get My Wife To Post Them I Will Bob G

01-07-2009	#15
Polo-1 Join Date: Sep 2005 Location: Washington Posts: 955	Re: 440 CI update? current "440" 4.100/.125 bore blocks are from $6,500 to $13,500 This is the range I have heard from the 3 big bore guys, This is only the block and sleeve work. You must have the bucks and will to go this route. As the cost for the rest of your stroker is added into from the price above.

01-07-2009	#16
diamond zr1 Join Date: Sep 2006 Location: diamond lake /washington Posts: 223	Re: 440 CI update? Polo-1 /just stick with 402 and turbo it.If the lt5@ 402 runs anything like my ls2 @ 402 turbo you will love it.I would like to see a lt5 turbo.If I ever take my 368 down,it will get turbos. joe

03-04-2009	#17
Polo-1 Join Date: Sep 2005 Location: Washington Posts: 955	Re: 440 CI update? How is the build going, any news.

03-06-2009	#19
rkreigh Join Date: Jan 2004 Location: Alex VA Posts: 1,087	Re: 440 CI update? sweet! we just need to get nelson or somebody to step up and make a cnc billet block to allow these big bore deals 13,500 to mod the block is a bit much. who was the "big guy" who would do it for 6,500 pretty big price range!! __________________ 95 390 LPE ZR1 (505 rwhp) LSV = Lingenfelter Super Vette Twin Turbo 2003 Z06 (800 RWHP)

04-11-2009	#20
Polo-1 Join Date: Sep 2005 Location: Washington Posts: 955	Re: 440 CI update? Word on the street is the 440 is running. AL