TPS adjustment

[FormulaReed]

I figured it out. I could not figure out how to get the aldldroid app to spit out the TPS voltage data, but the application from 1320 electronics does.

Turns out the TPS was at like .3v. I adjusted it to .54v. I drove it around a bit and it feels like it's fixed. The TPS code is gone and it sure drives better.

Sent from my SM-T280 using ZR-1 Net Registry mobile app

[Ccmano]

Glad you figured it out. AldlDroid has two indicators for throttle position. “TPS%” and “Throttle Position”. The first is obviously just a percentage. The later I believe, is the voltage. Your screen should look something like this before you turn the ignition on.
H

[Ccmano]

Yes, just confirmed it on mine. “Throttle Position” is the TPS voltage. Here’s a shot of mine just now.
H

[Subfixer]

Which small tablet are you guys using. The App on my phone is too small to see while moving.....

[Ccmano]

Originally Posted by Subfixer

Which small tablet are you guys using. The App on my phone is too small to see while moving.....

I use an Amazon Fire 7. Works good but you have to hack some of the programming to get it to work. Amazon has some proprietary stuff on there. Just find a cheap android tablet on eBay or at Walmart and it should work just fine as is.
H

[FormulaReed]

I've got a Samsung Galaxy tab 7. I'm not super savy with tech so I just spent the bucks to make it easy.

Sent from my SM-T280 using ZR-1 Net Registry mobile app

[FormulaReed]

Originally Posted by Ccmano

Yes, just confirmed it on mine. “Throttle Position” is the TPS voltage. Here’s a shot of mine just now.
H

Thanks. I thought that might be it.

Sent from my SM-T280 using ZR-1 Net Registry mobile app

[-=Jeff=-]

Nexus 7 tablets work well, I have both the Nexus 2012 and 2013. I should sell the 2012s as I rarely use them