ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 General Postings

Reply
 
Thread Tools Display Modes
Old 04-13-2019   #11
billschroeder5842
 
billschroeder5842's Avatar
 
Join Date: Nov 2016
Location: Southlake, TX
Posts: 592
Default Re: Any Suggestions on This?

Well Done! You did a great job!

Now, please consider a trip to a solid ZR1 tuner. You have improved enough that you will need to have your chip re-tuned to the the most out of your car.
__________________
Bill Schroeder
Texas Proud!

1991 Corvette ZR1 #1388
2015 Challenger Scat Pack Shaker

billschroeder5842 is offline   Reply With Quote
Old 04-13-2019   #12
32valvZ
 
32valvZ's Avatar
 
Join Date: Nov 2007
Location: Sunshine State
Posts: 1,071
Default Re: Any Suggestions on This?

Quote:
Originally Posted by billschroeder5842 View Post
Well Done! You did a great job!

Now, please consider a trip to a solid ZR1 tuner. You have improved enough that you will need to have your chip re-tuned to the the most out of your car.
Previous owner had one of Marcs' chips installed... I guess he sent for it and Marc sent it. I also have the original. I have allot of extras stuff with this car actually, starter, wires, drive shaft, OEM wheels... and more...seller even gave me a Snap On Scanner that I dont really know how to use...

Anyway, do you think Ill need a reburn or another chip now because of the headers? I was wondering if the altitude here where I live at 5200' might necessitate the need for a reburn also...

The car runs phenomenally well... good idle, very little hunting on decel, but.... once in a while I get some light backfiring... dont know if that can be addressed with the tune...

__________________
[B]1990 #2815[/B]
[COLOR="Red"][B]Red/Red[/B][/COLOR]
Ported Plenum & IH (by Pete)
Haibeck Chip
Rebuilt FPR (by Phil)
FIC Injectors
Watson LT Headers
3" Stainless Works exhaust
Lingenfelter Open Air Lid
Bill B Built Transmission
Shifter & C Beam Plates


[FONT=Impact][COLOR=red]1992 [COLOR=black]#[/COLOR] 091[/COLOR][/FONT]
[FONT=Impact][COLOR=#ff0000]Red/[COLOR=silver]Gray[/COLOR][/COLOR][/FONT]
[B]SOLD[/B]
32valvZ is offline   Reply With Quote
Old 04-14-2019   #13
HAWAIIZR-1
 
HAWAIIZR-1's Avatar
 
Join Date: May 2010
Location: Japan
Posts: 3,582
Default Re: Any Suggestions on This?

Nice job and glad you got it all sorted out. Yes, Marc will tune out the backfire. I have his ver. 4 chip for my car and will have to send to him once I install my headers.


Sent from my iPhone using ZR-1 Net Registry
__________________
Craig
"ZR-1 NO KA 'OI"
"ZR-1 ICHIBAN"
1995 #228 Black/Black with Dunn Heads
ZR-1 owner since September 2003
ZR-1 Net Registry Founding Member #0074
NCM Lifetime Member #2048

HAWAIIZR-1 is offline   Reply With Quote
Old 04-14-2019   #14
efnfast
 
Join Date: Nov 2011
Location: Dunbarton NH
Posts: 7,487
Default Re: Any Suggestions on This?

I would think headers, exhaust and elevation would warrant a tune. Marc can turn the decel backfire on or off. I'm not sure if it's adjustable or not. I like a little backfire on decel, but of course that makes you a cop magnet even more than just driving a Vette.
efnfast is offline   Reply With Quote
Old 04-14-2019   #15
Mystic ZR-1
 
Mystic ZR-1's Avatar
 
Join Date: Jan 2010
Location: Mystic CT
Posts: 2,633
Default Re: Any Suggestions on This?

Quote:
Originally Posted by efnfast View Post
I would think headers, exhaust and elevation would warrant a tune. Marc can turn the decel backfire on or off. I'm not sure if it's adjustable or not. I like a little backfire on decel, but of course that makes you a cop magnet even more than just driving a Vette.
Steve
It’s not the backfires that draws the cops to you...
It’s the screeching tires and 2 long black strips you leave behind
everywhere you go! 😋
Mystic ZR-1 is offline   Reply With Quote
Old 04-15-2019   #16
WARP TEN
 
WARP TEN's Avatar
 
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,095
Default Re: Any Suggestions on This?

Quote:
Originally Posted by Paul Workman View Post
The spring supports reduce some of the sound that otherwise is transmitted from the exhaust to the cabin. And, they provide some flex in case the pipes bottom on something solid, e.g., speed bumps.
Paul is right on both counts. If you attach the exhaust system directly to the frame without the springs you are transmitting not only sound but engine and drive train vibrations to the frame. I think you would feel it, and in addition to avoiding stress on all the joints on a hard bottoming as Paul said, I would think very aggressive acceleration might do some twisting as well. In any case you might try some tests with the springs attached and not to see if you can tell a difference.-Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z"
1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts
--Sold but still running strong
1993 Quasar Blue #161 "HIL KING"
--Sold but still running strong, now with more than 120,000 miles
1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd
--Sold a long time ago
ZR-1 Net Registry Founding Member #95
NCM Lifetime Member
Favorite Quote--Attributed to Mickey Thompson:
"Too Much Horsepower is Almost Enough"
WARP TEN is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:27 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020