![]() |
#11 |
![]() Join Date: May 2010
Location: Japan
Posts: 3,094
|
![]()
Nice work and welcome to the family. Thanks for sharing!!
Sent from my iPhone using ZR-1 Net Registry
__________________
Craig "ZR-1 NO KA 'OI" "ZR-1 ICHIBAN" 1995 #228 Black/Black with Dunn Heads ZR-1 owner since September 2003 ZR-1 Net Registry Founding Member #0074 NCM Lifetime Member #2048 ![]() |
![]() |
![]() |
![]() |
#12 | |
![]() Join Date: Aug 2018
Location: MICHIGAN
Posts: 31
|
![]() Quote:
Its pretty simple. Use some carpet glue on the cover. What's nice is the underneath of that door comes off so you can fold the Alcantara under then screw that piece back on to hold it on while the glue dries. |
|
![]() |
![]() |
![]() |
#13 | |
![]() Join Date: Aug 2018
Location: MICHIGAN
Posts: 31
|
![]() Quote:
Everyone here has been very helpful. |
|
![]() |
![]() |
![]() |
#14 |
![]() Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,156
|
![]()
Ah you just wrapped over the OEM pad... That seems simple enough.. THANKS.
lso do you have some shots of the doors? I have a 1990 but the Later torch red interior. Currently using 94-96 door panels, but they are cheaply made vs the 93 panels, which I also have, but cannot remember if the door handle bezels are red or black THANKS
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Shelby Series 1 - Wilwood Brakes Custom Interior NCM Lifetime Member #978 |
![]() |
![]() |
![]() |
#15 | |
![]() Join Date: Aug 2018
Location: MICHIGAN
Posts: 31
|
![]() Quote:
The door bezels are red. At the bottom of my web page you can see updated pictures of my interior. There are shots of the door panels. https://db1of1.wixsite.com/1of1 Last edited by djhome23; 04-20-2020 at 07:09 PM. |
|
![]() |
![]() |
![]() |
#16 |
![]() Join Date: May 2008
Location: Okemos, MI.
Posts: 1,190
|
![]()
That is good looking. Nice theme and execution.
![]()
__________________
Joe Thomas Corvette Club of Michigan NCRS-Michigan Chapter Member NCM Master Ambassador NCM Lifetime Member Former NCM Board Member 1991 ZR-1 Melon Copper Metallic/Black 1992 ZR-1 Bright Red/Black (Sold) 1995 ZR-1 Bright Aqua/Gray (Sold) 2012 ZR1 Super Sonic Blue / Dark Titanium |
![]() |
![]() |
![]() |
#17 |
![]() Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,156
|
![]()
Any paritcular carpet glue?
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Shelby Series 1 - Wilwood Brakes Custom Interior NCM Lifetime Member #978 |
![]() |
![]() |
![]() |
#18 |
![]() Join Date: Aug 2018
Location: MICHIGAN
Posts: 31
|
![]()
No. I think I picked up a can at Autozone. It was 3M.
Last edited by djhome23; 12-25-2018 at 05:12 PM. Reason: spelling errors |
![]() |
![]() |
![]() |
#19 |
![]() Join Date: Aug 2018
Location: MICHIGAN
Posts: 31
|
![]()
(Dec 24th) - Merry Christmas everyone!
I have updated my website with pics to show the start of the paint correction at the front of the car along with Front Brake replacement. Last edited by djhome23; 12-24-2018 at 10:54 PM. Reason: Forgot to add text |
![]() |
![]() |
![]() |
#20 |
![]() Join Date: Apr 2015
Location: Kentucky
Posts: 352
|
![]()
Merry Christmas and a Happy New Year! Welcome!
Z is turning out completely awesome! ...one thought, if you haven't already... when you get the rear wheels off, you may want to go deeper and clean rust off of the spindle shafts (splines), and then relube. If it's there, the rust will cause a clicking/popping noise when you start rolling. I did it on my '94 here: http://www.zr1.net/forum/showthread....hlight=splines
__________________
'94 ZR1 LT5 - Dark Red Metallic '79 L82 4-speeds of fun '96 LT1 Borla, H-pipe, TB, CAI (Sold) "An adventure is only an inconvenience rightly considered. An inconvenience is only an adventure wrongly considered." -- G.K. Chesterton |
![]() |
![]() |
![]() |
|
|