I-PASS mounting on the Z - Page 2 - ZR-1 Net Registry Forums

WARP TEN · 05-12-2018

I positioned it under and slightly in front of my Valentine 1 radar detector in the windshield cutout. With the V1 securely attached to the windshield with suction cups and the I-Pass underneath, I pushed the V1 tight against it. It held it there fine and always worked at the tolls. (FYI, my V1 was hardwired with the wire source at the fusebox on the passenger side of the dash [accessible when the passenger door is open]. The wire is then run up under the dash and out the grill in the dash center. Had to make a small notch in the edge of the grill. And full disclosure: Marc Haibeck did the actual work.)--Bob

secondchance · 05-12-2018

Being registered in Florida my Z does not have front plate. License plate mount transponder fit nicely inside the front plate filler trim and works great.

Mr.Yuck · 05-12-2018

Quote:

Originally Posted by HAWAIIZR-1

Attachment 7458

I’m using the radar cutout for mine that works, but I have not tried any other location.

Sent from my iPhone using ZR-1 Net Registry

I think using the radar cutout makes the most operational sense. If it doesn't work I get a ticket and they get to read my plate!! LolIMAG1212_1_2_1_1.jpg

Sent from my 2PS64 using Tapatalk

HAWAIIZR-1 · 05-12-2018

Quote:

Originally Posted by secondchance

Being registered in Florida my Z does not have front plate. License plate mount transponder fit nicely inside the front plate filler trim and works great.

I had no idea you had ties to Florida Yun!!!

HAWAIIZR-1 · 05-12-2018

Quote:

Originally Posted by Mr.Yuck

I think using the radar cutout makes the most operational sense. If it doesn't work I get a ticket and they get to read my plate!! LolAttachment 7460

Sent from my 2PS64 using Tapatalk

. Ha, ha! Nice looking Z and cool plate!

secondchance · 05-12-2018

Quote:

Originally Posted by HAWAIIZR-1

I had no idea you had ties to Florida Yun!!!

I lived near Orlando (Lake Mary) for 8 years.

HAWAIIZR-1 · 05-12-2018

Quote:

Originally Posted by secondchance

I lived near Orlando (Lake Mary) for 8 years.

Cool! Thanks for sharing. I would have never guessed it.

Sent from my iPhone using ZR-1 Net Registry

Mr.Yuck · 08-02-2019

I used 3M Velcro on a plate mount I-PASS. Used it 14 times over the past six months with no issues. Works great concealed.

Sent from my iPad using ZR-1 Net Registry IMG_1078.jpg IMG_1079.jpg

Flyman 27 · 08-03-2019

I have the OEM windshield and have tried several locations for the I-Pass here in Illinois. The only place it reads for me is the windshield cutout.
I love the idea of placing the transponder behind the front plate cover, that would solve a lot of issues.

jrd1990zr1 · 08-04-2019

I've had my NY EZ-Pass in the radar cut-out for quite a while. Works well there.

Front radar detector is mounted inside the front bumper near the front license plate. Front plate is where they target radar/laser.

05-12-2018	#12
secondchance Join Date: Aug 2006 Location: McLean, VA Posts: 3,717	Re: I-PASS mounting on the Z Being registered in Florida my Z does not have front plate. License plate mount transponder fit nicely inside the front plate filler trim and works great.

08-02-2019	#18
Mr.Yuck Join Date: Nov 2014 Location: WI Posts: 120	I-PASS mounting on the Z I used 3M Velcro on a plate mount I-PASS. Used it 14 times over the past six months with no issues. Works great concealed. Sent from my iPad using ZR-1 Net Registry IMG_1078.jpg IMG_1079.jpg Last edited by Mr.Yuck; 08-02-2019 at 09:56 AM.

08-03-2019	#19
Flyman 27 Join Date: Apr 2017 Location: Wayne Illinois Posts: 400	Re: I-PASS mounting on the Z I have the OEM windshield and have tried several locations for the I-Pass here in Illinois. The only place it reads for me is the windshield cutout. I love the idea of placing the transponder behind the front plate cover, that would solve a lot of issues. __________________ [SIGPIC][/SIGPIC] 91-#1935 Black/black & gray, Haibeck 500 Cams by Pete

08-04-2019	#20
jrd1990zr1 Join Date: Dec 2005 Location: Delanson, NY Posts: 925	Re: I-PASS mounting on the Z I've had my NY EZ-Pass in the radar cut-out for quite a while. Works well there. Front radar detector is mounted inside the front bumper near the front license plate. Front plate is where they target radar/laser. __________________ 1968 convertible Lemans Blue, 1986 coupe Medium Blue NCRS Top Flight (sold), 1990 ZR1 #2529 Red NCRS Regional and National Top Flight (sold), 1990 ZR1 #2124 Charcoal Metallic NCRS Top Flight 2010 & 2018, 2003 Anniversary Red Convertible (sold)