Interior is almost complete...

[HAWAIIZR-1]

Nice improvements there and it is more updated without the carpet on the lower dash. I really like that. Great job!!

[rkreigh]

looks fantastic

I'm wanting to put in a black red interior

can you "redo" the stock black door panels with the red?

what material works best and is there a shop in NOVA you guys would recommend?

like to get the seats, door panels, and knee boards all redone custom in black/red

also, what's involved in putting the pedal covers on, do you have to drill and tap the pedals?

nice work!!!

[-=Jeff=-]

Thanks Guys.. I am digging the black button contrast with grey

Ron to answer your questions

Originally Posted by rkreigh

can you "redo" the stock black door panels with the red?

there was a guy on CF that bought red vinyl from a fabric store and made it work.. I would think a Upholstery/Trim shop could do that or search eBay for a Pair of Door panels in red

Originally Posted by rkreigh

also, what's involved in putting the pedal covers on, do you have to drill and tap the pedals?

Those pedals were 3 drilled holes then Machine Screw with lock nuts.. I drove it today for the first time with those and it is not too bad, they are a bit wider then stock and I was concerned my Clutch foot would hit the brake..

I have only had the pedals for 6 years... LOL I have a Accelerator one too, but I decided I did not want to install that one

[WydGlydJim]

Drape the red snowflake blanket over the rear cargo area, and you are set!

[-=Jeff=-]

Lol.. It left with the hatch

[Locobob]

Hey Jeff, how hard was it to get the 94+ hush panel to work? I've got a set of 94+ doors and hush panel. I have the doors just about on... except that I'm fighting with a high spot/gap in the middle, been eyeballing the hush panel and trying to decide if I'm gonna do anything with it.

[-=Jeff=-]

Robert,

it is not too bad to do honestly.. I had the dash pad out of the car to cut off the carpeted hush area. I cut it right at the indent at the top of the carpet. on my 94+ hush panel the right most tab ( on corner) had broken off and it was actually better that it was gone for fitting it. to hold it up I made 2 short brackets that bolted to the dash structure and I used fender washers with a bolt and nut to clamp down on 2 of the 3 tabs of the hush panel.

It turned out really nice but where the door meets the dash edge the dash is about 1/4 forward of the door which you can see in the picture I had posted.

it does really change the interior.. now to decide if I should go all red with the carpet

[XfireZ51]

Jeff stopped by yesterday since I am starting on conversion of my black interior to saddle/cognac. So I'll have some black interior pieces for sale.
Jeff's interior looks great and he had done the interior lights w white LED and it looked awesome at night w the red interior.

[Locobob]

Originally Posted by -=Jeff=-

Robert,

it is not too bad to do honestly.. I had the dash pad out of the car to cut off the carpeted hush area. I cut it right at the indent at the top of the carpet. on my 94+ hush panel the right most tab ( on corner) had broken off and it was actually better that it was gone for fitting it. to hold it up I made 2 short brackets that bolted to the dash structure and I used fender washers with a bolt and nut to clamp down on 2 of the 3 tabs of the hush panel.

It turned out really nice but where the door meets the dash edge the dash is about 1/4 forward of the door which you can see in the picture I had posted.

it does really change the interior.. now to decide if I should go all red with the carpet

Most of the tabs are broken on the hush panel I have but I could probably rig something up, I noticed that it has the same two lower bolt hole locations as my current panel but they are covered over with fabric???

P.S. I vote no on the red carpet, it doesn't seem to stay looking nice very long.

[-=Jeff=-]

You don't need the lower bolts that are covered, you use them I did not on my conversion