ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 General Postings

Reply
 
Thread Tools Display Modes
Old 12-04-2010   #11
Z51JEFF
 
Z51JEFF's Avatar
 
Join Date: Dec 2007
Location: Fremont,Ca
Posts: 3,077
Default Re: Picking up the ZR-1 on Saturday!

Quote:
Originally Posted by EvanZR1 View Post

On the cam cover badges, do they just stick on?
I used Black RTV Sealant,just a few small dabs in the middle.If your not sure you got enough tap on the emblem with your finger,if its solid your good.
Z51JEFF is offline   Reply With Quote
Old 12-04-2010   #12
threestar40
 
Join Date: Jan 2005
Posts: 150
Default Re: Picking up the ZR-1 on Saturday!

Congrats...that's the best car yet from your list!

You will have an awesome trip back, I suggest driving North Through Zion National park then back...you will never forget it and it's not that far out of your way. Just make sure you leave Vegas fairly early in the a.m.

It is the most beautiful drive I've ever had in my life!

threestar40 is offline   Reply With Quote
Old 12-05-2010   #13
JThomas
 
JThomas's Avatar
 
Join Date: May 2008
Location: Okemos, MI.
Posts: 1,189
Default Re: Picking up the ZR-1 on Saturday!

Congrats on the purchase!
__________________
Joe Thomas
Corvette Club of Michigan
NCRS-Michigan Chapter Member
NCM Master Ambassador
NCM Lifetime Member
Former NCM Board Member
1991 ZR-1 Melon Copper Metallic/Black
1992 ZR-1 Bright Red/Black (Sold)
1995 ZR-1 Bright Aqua/Gray (Sold)
2012 ZR1 Super Sonic Blue / Dark Titanium
JThomas is offline   Reply With Quote
Old 12-05-2010   #14
Paul Workman
 
Paul Workman's Avatar
 
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
Default Re: Picking up the ZR-1 on Saturday!

Quote:
Originally Posted by Z51JEFF View Post
I used Black RTV Sealant,just a few small dabs in the middle.If your not sure you got enough tap on the emblem with your finger,if its solid your good.
Dittos on the black RTV. Not that you're going to need to, but that way if ever you need to remove them, they can easily be pried off with the tip of a small screwdriver. Just place a piece of cardboard or matchbook cover under screwdriver at the "fulcrum" point so as not to chip the paint on the valve cover as you pry against it.

P.
__________________
Good carz, good food, good friendz = the best of timez!

90 #1202
"FBI" top end ported & relieved
Cam timing by "Pete the Greek"
Sans secondaries
Chip & dyno tuning by Haibeck Automotive
SW headers, X-pipe, MF muffs

Former Secretary, ZR-1 Net Registry
Paul Workman is offline   Reply With Quote
Old 12-05-2010   #15
Nacho_ZR1
 
Join Date: Nov 2010
Location: Cedar Hill, Texas
Posts: 154
Default Re: Picking up the ZR-1 on Saturday!

How are the 4.10's? May I ask what MPH/ RPM's you are at when in 6th gear?

Nacho_ZR1 is offline   Reply With Quote
Old 12-06-2010   #16
EvanZR1
 
EvanZR1's Avatar
 
Join Date: Nov 2010
Location: Omaha
Posts: 403
Default Re: Picking up the ZR-1 on Saturday!

Well, finally made it home yesterday. I must say, I really love the ZR-1 on the open road. This thing is definitely at home on the open road at speed. I typically cruised at about 82MPH (turning just a little over 2K rpm), and averaging 25MPG (and that was with several sustained runs at 90-100, and blasts to higher). Also, I must say I actually like the valving on the 91 FX3 better than the FX3 my 92 had. There seems to be a much more noticeable difference between the settings (at least from what I can remember). The softest setting is a little floaty, but much more comfortable for long highway cruising or for rough roads. Sport tightens it up nicely and eliminates any "float" without being too jarring, and Performance should only be used on the track.

I am having to refine my driving style a little as the lack of low end (at least compared to my LT4 Firehawk) requires downshifting much more when wanting to get speed while cruising. Plus I keep having to remember that it revs to over 7K rpm!!
EvanZR1 is offline   Reply With Quote
Old 12-06-2010   #17
Kb7tif
 
Join Date: May 2009
Location: S Nevada
Posts: 352
Default Re: Picking up the ZR-1 on Saturday!

This should be interesting
__________________
1995 Convertible Supercharged Auto
1974 454 550hp (avatar car) On the blocks- -Scharger install !
1992-Zr-1 Sold.
Watson Headers
Ported Plenum, Housings
Random tech cats
Fidanza Flywheel
Chipped, Relocated Mat
Woods 165 stat
Borlas, Straights
1996 Lt4 Sold
1994 Lt1 Sold
2004 Z06 Sold
AKA** Illenema
Kb7tif is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:25 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020