|
03-30-2010
|
#11 |
 
Join Date: Aug 2006
Location: Edmonton, Alberta or Phoenix, Arizona
Posts: 2,740
|
Re: 1990 Rear Bumper Moldings (repro)
I think it's cool if you want to do the 90 moldings, but honestly, don't do it unless you can get something out of it, IE: $$. Good info from Kurt, sould's like very iffy it's it's worth it regardless. The set I have just fell in my lap, I didn't go looking for it.
__________________
There are no limit's mans ingenuity, just as mans ingenuity will never conquer the forces & behavior of this planet...Smokey Y. |
|
|
|
03-30-2010
|
#12 | |
 
Join Date: Jul 2004
Location: Kalamazoo MI
Posts: 1,759
|
Re: 1990 Rear Bumper Moldings (repro)
Quote:
I usually charge $400 for a used set of rear moldings all 4 pieces that seems to be a bit lower than most charge but there were moe 90s made than any other year but the 91-95 moldings seem to comand a much higher price Ive seen up to $1000 for the rear moldings. Now if you do the math there are just as many of the wide moldings as the skinny black so I havent a clue why the prices are crazy but thats the way it is.
__________________
JOHNNY P Currently own 90 ZR-1 #845 DRM 500 engine package 90 #226 Parts car Hit me up if you need anything. |
|
|
|
|
|
03-30-2010
|
#13 |
   
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,147
|
Re: 1990 Rear Bumper Moldings (repro)
I would venture to guess since a used set cost anywhere from the $300-$500 range that anything new reproduction wise that is slow lets say $100 below that cost threshold should sell. Especially if you take on the "dog leg" moldings as well.
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
03-30-2010
|
#14 |
 
Join Date: Feb 2010
Location: Pendleton, IN
Posts: 3,906
|
Re: 1990 Rear Bumper Moldings (repro)
I'll probably pass on this item as a repro. No biggie.
Thanks for the input, guys! 
__________________
1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project |
|
|
|
 |
|
|
Linear Mode
