WTB: 1990 Radio Bezel - Page 2 - ZR-1 Net Registry Forums

01-15-2010

Quote:

Originally Posted by tomtom72

Not to be sticking my two cents where it don't belong,, but if it's just an LED hole you can fill it with plumber's epoxy. You know that stuff the hdw store sells in the tubes.

To make a smooth finish on the out side of the fill just get a stiff piece of cellulose like those clear file folders or a small piece of wax paper will work.
You want to use it as a dam to press the epoxy against. A bit of baby oil will work as a polishing lube to insure a glass smooth surface. The crinkle paint for our interiors that MAD or CC or ZIP sells is a great match...just shake the chit outta the can before shooting. I used it to re-shoot my bezel and it's a very, very close match.....not 100% but 95+%.

Or...I just had a bfo. Go get one of those :gel-coat repair kits. It comes with the acetate film for the smoothing operation and a polyester or epoxy mending filler compound.

Tom

to mask off the lettering I used scotch tape.

I totally agree with Tom. I redid mine and it looks brand new and I searched and searched to find a match: Duplicolor Truck, Van and SUV, T299 Dark Shadow Gray; I could not get the aerosols shipped to me and I believe one of the Corvette suppliers has the console color match. I found the duplicolor at Checker's. If a new one shows up it will probably sell for $500 or more. Good luck and I hope this helps.

GOLDCYLON · 01-15-2010

Quote:

Originally Posted by Eric870

"Send a PM to Jim VanDorn"

Thanks i will do that..I have bought some stuff from Jim before...

Question:
Will a non-ZR-1 bezel fit on a ZR-1? There is some on E-bay for $50.

Yes PM Jeffvette he can post up a picture of how he mounted his power key and Concealed V1 Display in a stock bezel.

Eric870 · 01-17-2010

Thanks All.. But its not the LCD hole that bugs me it is the broken clips on the right side. The bezel has a 1/4" gape between the radio and bezel. I will post a picture later today.

GOLDCYLON · 01-19-2010

Well I knew he had one. Might be in better shape than yours.

Ebay #190366681662

or http://cgi.ebay.com/ebaymotors/CORVE...Q5fAccessories

Eric870 · 01-20-2010

Quote:

Originally Posted by GOLDCYLON

Well I knew he had one. Might be in better shape than yours.

Ebay #190366681662

or http://cgi.ebay.com/ebaymotors/CORVE...Q5fAccessories

Yes,

It is defiantly in better shape then mine. I wonder what else Jim has in his Attic.

GOLDCYLON · 01-20-2010

Quote:

Originally Posted by Eric870

Yes,

It is defiantly in better shape then mine. I wonder what else Jim has in his Attic.

From what Ive seen pop up on Ebay over the last 5 years, Im convinced if Jimmy Hoffa had anything to do with the LT5 development Program that indeed he too would be in Jim's attic

phrogs · 01-20-2010

Quote:

Originally Posted by Eric870

Yes,

It is defiantly in better shape then mine. I wonder what else Jim has in his Attic.

He has enough thats for sure!

I can say this for $100 thats not a bad deal but I think the last one I sold was $150?

I can't remember and it was in great shape.

xlr8nflorida · 01-20-2010

Quote:

Originally Posted by phrogs

He has enough thats for sure!

I can say this for $100 thats not a bad deal but I think the last one I sold was $150?

I can't remember and it was in great shape.

Anything under $200 is a good deal.

I have a few of them in my parts bin that I bought years ago but they were all pricey.

phrogs · 01-20-2010

Quote:

Originally Posted by xlr8nflorida

Anything under $200 is a good deal.

I have a few of them in my parts bin that I bought years ago but they were all pricey.

oh yeah usually I wouldn't let one go for under $200 but I can't really remember what I sold it for but usually over $200

01-17-2010	#13
Eric870 Join Date: Apr 2009 Location: Portland OR Posts: 173	Re: WTB: 1990 Radio Bezel Thanks All.. But its not the LCD hole that bugs me it is the broken clips on the right side. The bezel has a 1/4" gape between the radio and bezel. I will post a picture later today.

01-19-2010	#14
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: WTB: 1990 Radio Bezel Well I knew he had one. Might be in better shape than yours. Ebay #190366681662 or http://cgi.ebay.com/ebaymotors/CORVE...Q5fAccessories __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V