ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 12-11-2016   #11
Dynomite
 
Dynomite's Avatar
 
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,797
Default Re: ALDL Fault Codes

Quote:
Originally Posted by janozr1 View Post
thank you...….but i have 16 pin plug...
Existing ALDL Code Reader for 90'-93'.........................ALDL Code Reader used with Adapter for 94'-95'

For the 16 Pin ALDL.......
Ground is Pin 4
Ground to Pin 6 is ECM
Ground to Pin 8 is PKE (Alarm System)
Ground to Pin 12 is CCM
Ground to Pin 3 is SRC
So....in the adapter if I Connect the 16 Pin end to the 12 Pin end as follows:
16 Pin (94'-95')......12 Pin (90'-93')
Connect Pin 4 to.... Pin A
Connect Pin 12 to.. Pin G (White Button)
Connect Pin 8 to.... Pin H (Black Button)
Connect Pin 3 to.... Pin C (Yellow Button)
Connect Pin 6 to.... Pin B (Green Button)

Last edited by Dynomite; 07-25-2018 at 10:47 PM.
Dynomite is offline   Reply With Quote
Old 08-28-2019   #12
carguyjoe
 
carguyjoe's Avatar
 
Join Date: Jul 2019
Location: Chicagoland
Posts: 12
Default Re: ALDL Fault Codes

Can someone recommend a scan tool that works with ALDL/OBD1? I've seen the adapters that go from 12 pin to 16 pin but they have horrible reviews.
__________________
1991 Corvette ZR-1 - Polo Green/Saddle
2010 Mustang GT Convertible
2003 Thunderbird
1973 International Scout
1967 Pontiac GTO
1965 Mustang Convertible
1958 Plymouth Belvedere Convertible
1957 Ford Thunderbird

Last edited by carguyjoe; 08-28-2019 at 07:02 PM.
carguyjoe is offline   Reply With Quote
Old 08-28-2019   #13
SAHall
 
Join Date: Apr 2018
Location: New Jersey
Posts: 29
Default Re: ALDL Fault Codes

Quote:
Originally Posted by carguyjoe View Post
Can someone recommend a scan tool that works with ALDL/OBD1? I've seen the adapters that go from 12 pin to 16 pin but they have horrible reviews.


If you want access to all the OBD1 scan features, try to track down a Tech 1 or Tech 1A scan tool and appropriate cartridges on eBay. I can send a list of useful Tech 1 cartridges if you are interested in exploring this route.


Sent from my iPhone using ZR-1 Net Registry
SAHall is offline   Reply With Quote
Old 08-28-2019   #14
XfireZ51
 
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,702
Default Re: ALDL Fault Codes

Quote:
Originally Posted by carguyjoe View Post
Can someone recommend a scan tool that works with ALDL/OBD1? I've seen the adapters that go from 12 pin to 16 pin but they have horrible reviews.
Are u looking to simply determine what MALF codes u have or trying to datalog ALDL datastream?
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman
Former ZR-1 Registry - BOD
1972 Corvette 4speed base Coupe SOLD long time ago
1984 Corvette Z-51/4+3 SOLD
1992 Corvette ZR-1 Aqua/Gray #474 SOLD
1992 Corvette ZR-1 Black Rose/Cognac #458
2014 Honda VFR Interceptor DX
XfireZ51 is offline   Reply With Quote
Old 08-29-2019   #15
carguyjoe
 
carguyjoe's Avatar
 
Join Date: Jul 2019
Location: Chicagoland
Posts: 12
Default Re: ALDL Fault Codes

Currently I don't have any idiot lights on, so I guess I wanted to look back at history, and be ready if anything goes wrong. I also have a Fox Body Mustang which I believe is also some form of OBD1, so I was looking for something that would get both cars. But now in looking I can see it gets expensive with all the adapters.
__________________
1991 Corvette ZR-1 - Polo Green/Saddle
2010 Mustang GT Convertible
2003 Thunderbird
1973 International Scout
1967 Pontiac GTO
1965 Mustang Convertible
1958 Plymouth Belvedere Convertible
1957 Ford Thunderbird
carguyjoe is offline   Reply With Quote
Old 08-29-2019   #16
XfireZ51
 
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,702
Default Re: ALDL Fault Codes

Quote:
Originally Posted by carguyjoe View Post
Currently I don't have any idiot lights on, so I guess I wanted to look back at history, and be ready if anything goes wrong. I also have a Fox Body Mustang which I believe is also some form of OBD1, so I was looking for something that would get both cars. But now in looking I can see it gets expensive with all the adapters.
OBD1 should be the same 12pin for all makes. Code should lite SES unless it was cleared or u started the vehicle 50 times w/o recurrence of fault.
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman
Former ZR-1 Registry - BOD
1972 Corvette 4speed base Coupe SOLD long time ago
1984 Corvette Z-51/4+3 SOLD
1992 Corvette ZR-1 Aqua/Gray #474 SOLD
1992 Corvette ZR-1 Black Rose/Cognac #458
2014 Honda VFR Interceptor DX
XfireZ51 is offline   Reply With Quote
Old 02-16-2020   #17
Perry Mitchell
 
Join Date: Nov 2018
Location: Washington
Posts: 98
Default Re: ALDL Fault Codes

The LT5 motor in my 67 Camaro flashes what I believe to be 66. Your list does not show a code 66 but doing further research I found information that says a code 66 represents a low or high power switch voltage. What does that mean? The valet key has been grounded to allow full power at all times. Any ideas?
Perry Mitchell is offline   Reply With Quote
Old 02-16-2020   #18
XfireZ51
 
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,702
Default Re: ALDL Fault Codes

Quote:
Originally Posted by Perry Mitchell View Post
The LT5 motor in my 67 Camaro flashes what I believe to be 66. Your list does not show a code 66 but doing further research I found information that says a code 66 represents a low or high power switch voltage. What does that mean? The valet key has been grounded to allow full power at all times. Any ideas?
One question is which calibration are u using? What MY ZR?
Is the power switch from a 90 or 91-95? There’s a difference.
Was ur calibration modified for power switch being ON.
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman
Former ZR-1 Registry - BOD
1972 Corvette 4speed base Coupe SOLD long time ago
1984 Corvette Z-51/4+3 SOLD
1992 Corvette ZR-1 Aqua/Gray #474 SOLD
1992 Corvette ZR-1 Black Rose/Cognac #458
2014 Honda VFR Interceptor DX
XfireZ51 is offline   Reply With Quote
Old 02-16-2020   #19
Perry Mitchell
 
Join Date: Nov 2018
Location: Washington
Posts: 98
Default Re: ALDL Fault Codes

Thank you for the response. My motor and computer are from a wrecked 91 ZR1. To the best of my knowledge, no recalibration has ever been done. The only engine modification is the installation of long tube headers. I removed the cover from the prom and found the following information: DELCO/AXFK/0277 and 060075.The instructions from the engine wiring harness kit said to simply ground the one terminal that would have otherwise run to the switch if full power all the time was desired. The motor starts fine, idles fine but is extremely rich. Any advice?
Perry Mitchell is offline   Reply With Quote
Old 02-16-2020   #20
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,162
Default Re: ALDL Fault Codes

Power key on a 1991 does not work by grounding the pin.. you need a 645 ohm resistor across the power key pins on the ECM. that will keep it in Full Power mode
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:31 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020