Project progress.... 92'ZR-1 - Page 2 - ZR-1 Net Registry Forums

-=Jeff=- · 11-05-2018

so narrower tires which translates to narrower wheels, I would guess 10" in back and 8" in front..

I would assume the narrow tires were to get something that did not require spacers.

Since you stated you never posted details about your brake set-up.. May I ask what you are doing (if anything) for a parking brake?

Also what is the cost you have invested in your 1-off brake setup..

XfireZ51 · 11-05-2018

Quote:

Originally Posted by zr1assassin

Its fine

Surprising given that u are using 19” wheels altho w 265 tires. I am using 285s but on an 18” wheel.

-=Jeff=- · 11-05-2018

Yep thanks

What about parking brake?

-=Jeff=- · 11-05-2018

I do, but using stock rear brakes still.. my fronts are Wilwood 6p but I am limited as to what fits under the Shelby Wheels

-=Jeff=- · 11-06-2018

Dunno, to me I am not sure of the 19s.. I would need to see your car or a C4 with 19s in person to make a clear judgement

-=Jeff=- · 11-06-2018

Yeah, I think seeing it in person helps though. You see at at angles you are used to.

XfireZ51 · 11-06-2018

Quote:

Originally Posted by zr1assassin

Not using one, well as of now, I might fab up something but I honestly dont think I need it. Never used it once before the swap so lol. Do you have one on yours?

Yeah I use eBrake on my Z06 rear. I think the 18/19” stagger gives the C4 a very nice rakish look to it that enhances the low front end to taller rear end wedge shape.

XfireZ51 · 11-06-2018

Here u go

Karl · 11-11-2018

Quote:

Originally Posted by zr1assassin

Wanted to give you guys a look at how the progress is coming along. So far have done B&B exhaust, headers, Wheels, calipers, rotors and coilovers. Now we start on the go fast phase 😁😁😁

"HULK" is coming along nicely

Nice looking car!

Karl · 11-11-2018

Quote:

Originally Posted by zr1assassin

Nope, keeping that info for myself 😉. I chose this setup because I wanted to be the only one that had it.

Do you think it is kind of ironic to ask for help and knowledge about the LT-5 and not want to share how you did a big brake upgrade?

11-05-2018	#11
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,164	Re: Project progress.... 92'ZR-1 so narrower tires which translates to narrower wheels, I would guess 10" in back and 8" in front.. I would assume the narrow tires were to get something that did not require spacers. Since you stated you never posted details about your brake set-up.. May I ask what you are doing (if anything) for a parking brake? Also what is the cost you have invested in your 1-off brake setup.. __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

11-05-2018	#13
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,164	Re: Project progress.... 92'ZR-1 Yep thanks What about parking brake? __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

11-05-2018	#14
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,164	Re: Project progress.... 92'ZR-1 I do, but using stock rear brakes still.. my fronts are Wilwood 6p but I am limited as to what fits under the Shelby Wheels __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

11-06-2018	#15
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,164	Re: Project progress.... 92'ZR-1 Dunno, to me I am not sure of the 19s.. I would need to see your car or a C4 with 19s in person to make a clear judgement __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

11-06-2018	#16
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,164	Re: Project progress.... 92'ZR-1 Yeah, I think seeing it in person helps though. You see at at angles you are used to. __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978