ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 05-27-2024   #11
1991 Corvette ZR-1
 
Join Date: Sep 2018
Location: Florida
Posts: 305
Default Re: Electrical question: is this supposed to be here

Sounds like one of the lifters is not happy. How old is the oil? Is the level within the hash marks on the dipstick? I have an old beater four cylinder that makes the exact same lifter chatter noises if the oil gets too low or the oil is past due for changing.
1991 Corvette ZR-1 is offline   Reply With Quote
Old 05-27-2024   #12
Marc Haibeck
 
Join Date: May 2007
Location: Addison IL
Posts: 244
Default Re: Electrical question: is this supposed to be here

A lower pitch click could be from the cams snapping over center due to slack in a secondary timing chain. There must be at least 10 psi of oil pressure to keep the chain tensioned.

The same sound could also be caused by a leaky check valve in a chain tensioner. Try to identify the source as from the left or right bank. The retainer for the check ball could be loose. If so, the tensioner can be repaired rather then replaced.
Marc Haibeck is offline   Reply With Quote
Old 05-28-2024   #13
Tim555
 
Join Date: Mar 2024
Location: Northeast
Posts: 44
Default Re: Electrical question: is this supposed to be here

Quote:
Originally Posted by 1991 Corvette ZR-1 View Post
Sounds like one of the lifters is not happy. How old is the oil? Is the level within the hash marks on the dipstick? I have an old beater four cylinder that makes the exact same lifter chatter noises if the oil gets too low or the oil is past due for changing.
Oil was changed in February. Level seemed good but I?ll check again.
Tim555 is offline   Reply With Quote
Old 05-28-2024   #14
Tim555
 
Join Date: Mar 2024
Location: Northeast
Posts: 44
Default Re: Electrical question: is this supposed to be here

Quote:
Originally Posted by Marc Haibeck View Post
A lower pitch click could be from the cams snapping over center due to slack in a secondary timing chain. There must be at least 10 psi of oil pressure to keep the chain tensioned.

The same sound could also be caused by a leaky check valve in a chain tensioner. Try to identify the source as from the left or right bank. The retainer for the check ball could be loose. If so, the tensioner can be repaired rather then replaced.
Thanks Mark. I?ll take a closer listen to it and see which side it is coming from. Does the engine have to come out to repair or replace a tensioner?
Tim555 is offline   Reply With Quote
Old 06-11-2024   #15
davegarcia
 
Join Date: Jan 2013
Location: Auburn,Ca.
Posts: 2
Default Re: Electrical question: is this supposed to be here

The light for the airbag on my 1990 z, and the seatbelt light on the dash come on while driveing the car. Never has done that before. Unpluged the battery to see if that would reset the computer. Lights are still on after hooking up the battery. Any ideas what could be the problem? Thanks in advance, zr1dave@hotmail.com
davegarcia is offline   Reply With Quote
Old 06-11-2024   #16
hotroddaddyo
 
hotroddaddyo's Avatar
 
Join Date: Apr 2023
Location: Houston, TX
Posts: 327
Default Re: Electrical question: is this supposed to be here

https://www.corvetteforum.com/forums...elt-light.html
hotroddaddyo is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:00 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020