|
07-01-2009
|
#11 |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,696
|
Re: Knock Sensor; What happens if its disconnected
Lee,
The DRM cal I looked at does not negate knock retard. Its just as I described from the FSM. I would expect a Code 43 to be set in your case but I can't explain why it hasn't. Without that, I would say the ECM is not modifying timing. Hook it back up, put in a fresh clutch and let's see what happens. Who knows, maybe the clutch was slipping. |
|
|
|
07-01-2009
|
#12 | |
   
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,154
|
Re: Knock Sensor; What happens if its disconnected
Quote:
  Ah the Buick site..... Home of the Federal ZR-1 program.... According to Whitey, Come on Jeff you didnt know that???? 
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V Last edited by GOLDCYLON; 07-01-2009 at 08:38 PM. |
|
|
|
|
|
07-01-2009
|
#13 |
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,150
|
Re: Knock Sensor; What happens if its disconnected
C'mon guys..
If you unplug the Knock Sensor.. then the Knock Sensor does not work 
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
|
|
|
|
08-07-2014
|
#14 |
 
Join Date: Sep 2008
Location: Speedway, IN
Posts: 125
|
Re: Knock Sensor; What happens if its disconnected
The ECM does check this circuit periodically by advancing timing to trigger spark knock and checks to see if the sensor detects it. I had a bad pigtail connector and was getting a code 43 about every other drive. Replaced pigtail with OE AC Delco part from Advance Auto Parts and no more codes.
|
|
|
|
 |
|
|
Linear Mode
