Post pics of wheels with a lip / deep dish ---

[XfireZ51]

I like the Series One w a gray PC center hub. Someone had them done that way on a black ZR. Looked awesome.

[cvette98pacecar]

18X10 front 18x12 rear OZ 91 Aerobody
17X9.5 front 17X11 rear OZ. 93 Ruby

[Scrrem]

Here are my Fiske's...
Rich

[Jagdpanzer]

[Fully Vetted]

Originally Posted by Daniel_Mc

You are in the same spot I am in. The Gen I Dymags will not clear those brakes. I have AP Racing Brakes on the Z and Rippie's Wilwood set up on the 89. I don't think the shelby wheels will clear either. You can either refinsh the A Molds go Fikse, CCW, or Gen II Dymag for starters. Just make sure whoever you use that they know that brake set up is on the car. Most use a custom hat on the rotor that will push the wheel out some and this will cause wheels with an offset for a normal C4 (Z or not) to stick out.

Daniel

BTW those look like aftermarket A-Molds if you run OEM you will have just a hair more room.

You can move the center collar out on the Series Ones to clear. I haven't done it but some of the other guys here have done it.

[XfireZ51]

Originally Posted by Fully Vetted

You can move the center collar out on the Series Ones to clear. I haven't done it but some of the other guys here have done it.

Sometimes clearance is an issue regarding the radius of the wheel and not the face of the caliper. =Jeff= has Series ones and the C5 calipers he had were very close to the barrel of he wheel. He also needed to move the hub outward for clearance. His Brembos have better clearance.

[alwayscode390]

That seems to be how these calipers are with the current A-Molds... the radius is REALLY tight, I almost think the passenger side has made contact and dragged a little at some point. ---

[secondchance]

Alwayscode390,

I also run Fikse Profil 10s - 18x9.5 front and 18x11 rear - hand polished by Jagdpanzer.
I suggest that you consider possible conversion to 6 piston (front) and 4 piston (rear) hi-perf calipers while selecting which wheels to go with. Deep dish style wheels exudes "performance" look from the 70s to 90s. But deep dish design don't work well with modern day hi-perf calipers.


Car had just gotten off the floor jacks and the suspension had not fully settled yet.

[efnfast]

Originally Posted by XfireZ51

I have the 1st Gen Z06 wheels. They appear made for the ZR and give it a very Ferrari type of look which I like quite a bit.

Here's a pic with polished Z06 brake caliper:



Side View:



Wheel/Fender fitment:



Wheel well fitment:

Nice Dom, I don't think I ever saw the finished product.=D>

[ZZZZZR1]

Here are some dymags!

Fronts with C6 brakes



Rears with deep lip









David