ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 05-18-2015   #11
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,164
Default Re: Help locating a CCM module?

Quote:
Originally Posted by Dynomite View Post
Make sure the CHIP is Fully Installed Correctly
It could be in Limp Home Mode or Diagnostic Mode if not fully installed correctly.
in the ECM.. there is no socketed chip in the CCM
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is offline   Reply With Quote
Old 05-18-2015   #12
efnfast
 
Join Date: Nov 2011
Location: Dunbarton NH
Posts: 7,458
Default Re: Help locating a CCM module?

Before I dig into this too deep:
Facts:
The car won't start.
The A.C. unit stays energized with the key removed.
Pull the fuse to the AC, car starts and runs normally.
Reinstall fuse, everything ok.
Car has aftermarket stereo, everything looks ok, but no sound to speakers (unrelated?) system installed five years ago.
Aftermarket alarm/remote entry/remote windows/remote hatch.
The relay inside the drivers door to open the windows by remote has failed in the past due to water damage.
The windows currently don't work with the remote, but due with the door switch.
It was pouring rain when the problem first happened.
On the ride home, the AC went back to turning off with the key off.
I have not tried restarting the car normally yet. Glad to be home with the car in the garage.
Speculation:
The remote windows do not work. Wet relay again?
Was this system taped off the AC power feed and is somehow backfeeding to the AC unit and in turn the AC is telling the CCM not to let the car start???

I'll find out tonight if the car will start normally.
I'll find out tomorrow if the system pulls power from the AC.

Paul Workman and Jim Voter, I can't thank you enough for giving me your day to fuss with my car. Marc H, thanks for letting us pick your brain. Doug, thanks for sticking with me.
I'd have been screwed without you guys. -Steve
efnfast is offline   Reply With Quote
Old 05-18-2015   #13
Dynomite
 
Dynomite's Avatar
 
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,797
Default Re: Help locating a CCM module?

Quote:
Originally Posted by -=Jeff=- View Post
in the ECM.. there is no socketed chip in the CCM
Yes.....I am talking ECM.......just in case....lots of weird stuff happens with improperly installed ECM Chip.....
Dynomite is offline   Reply With Quote
Old 05-18-2015   #14
efnfast
 
Join Date: Nov 2011
Location: Dunbarton NH
Posts: 7,458
Default Re: Help locating a CCM module?

Update:
Fuse in, key out- AC off (normal)
Car starts and runs normally.
I'm liking and hoping for my theory. I'll talk to the stereo guy tomorrow.

Last edited by efnfast; 05-19-2015 at 07:43 PM.
efnfast is offline   Reply With Quote
Old 05-18-2015   #15
QB93Z
 
QB93Z's Avatar
 
Join Date: May 2007
Location: Westminster, Maryland
Posts: 3,689
Default Re: Help locating a CCM module?

Quote:
Originally Posted by efnfast View Post
Before I dig into this too deep:
Facts:
The car won't start.
The A.C. unit stays energized with the key removed.
Pull the fuse to the AC, car starts and runs normally.
Reinstall fuse, everything ok.
Car has aftermarket stereo, everything looks ok, but no sound to speakers (unrelated?) system installed five years ago.
Aftermarket alarm/remote entry/remote windows/remote hatch.
The relay inside the drivers door to open the windows by remote has failed in the past due to water damage.
The windows currently don't work with the remote, but due with the door switch.
It was pouring rain when the problem first happened.
On the ride home, the AC went back to turning off with the key off.
I have not tried restarting the car normally yet. Glad to be home with the car in the garage.
Speculation:
The remote windows do not work. Wet relay again?
Was this system taped off the AC power feed and is somehow backfeeding to the AC unit and in turn the AC is telling the CCM not to let the car start???

I'll find out tonight if the car will start normally.
I'll find out tomorrow if the system pulls power from the AC.

Paul Workman and Jim Voter, I can't thank you enough for giving me your day to fuss with my car. Marc H, thanks for letting us pick your brain. Doug, thanks for sticking with me.
I'd have been screwed without you guys. -Steve
Since the AC Relay is closest to the door, I suspect that the alarm system installer tapped into AC circuit to get power. I would start there with further investigation.

Good luck,

Jim
QB93Z is offline   Reply With Quote
Old 05-18-2015   #16
efnfast
 
Join Date: Nov 2011
Location: Dunbarton NH
Posts: 7,458
Default Re: Help locating a CCM module?

Quote:
Originally Posted by QB93Z View Post
Since the AC Relay is closest to the door, I suspect that the alarm system installer tapped into AC circuit to get power. I would start there with further investigation.

Good luck,

Jim
That's where I plan to start. Encouraging to know there may be hope to my theory. Thanks again for the help Jim.
efnfast is offline   Reply With Quote
Old 05-19-2015   #17
efnfast
 
Join Date: Nov 2011
Location: Dunbarton NH
Posts: 7,458
Default Re: Help locating a CCM module?

Stereo guy thinks it unlikely he hooked to AC. Bringing the car to him next Thursday.
efnfast is offline   Reply With Quote
Old 05-20-2015   #18
WARP TEN
 
WARP TEN's Avatar
 
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,088
Default Re: Help locating a CCM module?

Steve-- Glad you made it home OK and isn't it great that we have such a really fine group of guys like Paul, Marc, Jim, Doug and others who helped try to fix your problem. I am hoping you find a simple solution to this; it sounds like you are certainly on the right track. Good luck with it and keep us posted. --Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z"
1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts
--Sold but still running strong
1993 Quasar Blue #161 "HIL KING"
--Sold but still running strong, now with more than 120,000 miles
1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd
--Sold a long time ago
ZR-1 Net Registry Founding Member #95
NCM Lifetime Member
Favorite Quote--Attributed to Mickey Thompson:
"Too Much Horsepower is Almost Enough"
WARP TEN is offline   Reply With Quote
Old 05-20-2015   #19
efnfast
 
Join Date: Nov 2011
Location: Dunbarton NH
Posts: 7,458
Default Re: Help locating a CCM module?

Thanks Bob, hope it turns into a simple solution. Kinda' scary when these guys say "never seen that before".
efnfast is offline   Reply With Quote
Old 05-21-2015   #20
Paul Workman
 
Paul Workman's Avatar
 
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
Default Re: Help locating a CCM module?

Quote:
Originally Posted by efnfast View Post
*... scary when these guys say "never seen that before".
Ah, but dat makes it FUN!
__________________
Good carz, good food, good friendz = the best of timez!

90 #1202
"FBI" top end ported & relieved
Cam timing by "Pete the Greek"
Sans secondaries
Chip & dyno tuning by Haibeck Automotive
SW headers, X-pipe, MF muffs

Former Secretary, ZR-1 Net Registry
Paul Workman is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:45 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020