Big Block Chevy swapped into ZR1 - Page 2 - ZR-1 Net Registry Forums

Z51JEFF · 10-22-2017

Quote:

Originally Posted by Karl

How can you tell? It has all the marking of a z, less the interior power key and it looks like carbon fiber dash panels or such.

Look at the door,you can actually see the arch halfway through the door on a Z and that car doesn't have it.

HAWAIIZR-1 · 10-22-2017

Quote:

Originally Posted by Z51JEFF

Look at the door,you can actually see the arch halfway through the door on a Z and that car doesn't have it.

Nice catch if so Jeff. I’ll have to check my car next time. I did not know there is an arch difference.

Sent from my iPhone using ZR-1 Net Registry

Karl · 10-22-2017

Quote:

Originally Posted by Z51JEFF

Look at the door,you can actually see the arch halfway through the door on a Z and that car doesn't have it.

You are correct. I just visited their facebook page. Not a ZR-1. Odd to see the 3rd brake light up high vs the bumper.

Ccmano · 10-22-2017

Also has an original 8k rpm tach...
H

Z51JEFF · 10-23-2017

Quote:

Originally Posted by HAWAIIZR-1

Nice catch if so Jeff. I’ll have to check my car next time. I did not know there is an arch difference.

Sent from my iPhone using ZR-1 Net Registry

What's up Craig? Yea,it's a little odd to look down the side of the car and see the door bow out.

HAWAIIZR-1 · 10-23-2017

Quote:

Originally Posted by Z51JEFF

What's up Craig? Yea,it's a little odd to look down the side of the car and see the door bow out.

Hey Jeff! All is well here. I hope same with you and the Z/Nova. I hope to have a standard C4 next to my car one day to check this out in detail. I knew there was a difference with the door and body near the rear, but never actually looked at it. Thanks.

HAWAIIZR-1 · 10-23-2017

Quote:

Originally Posted by Karl

You are correct. I just visited their facebook page. Not a ZR-1. Odd to see the 3rd brake light up high vs the bumper.

Karl,

Thanks for sharing anyway. I missed hearing those cammed motors and that one sounded BADASS!

efnfast · 10-23-2017

This car has the spacers at the plate, so the rear must be wider than stock, hence born as a ZR-1?

cvette98pacecar · 10-23-2017

Not a wide body. Rear taillights are skinny, that is why the room is there for the 3" filler plate for the licenese.

But, I agree with the owner. first project after the current 2 are complete is a "572/800" big block. Can you say ZR-2.
I already have the ZR-1 donner car.

lfalzarano · 10-23-2017

It’s not a ZR-1. The rear wheel flares are from 1996 Grand Sport, the rear facia is a replacement (you will notice the area for 3rd brake light has been filled in and the Corvette logo is recessed, while ZR-1’s have raised Corvette logos), the 3rd brake light on the roof is consistent with all 1988-90 coupes, and the license place spacers are too narrow and so are the backup lights. It is not one of ours... [emoji17]

Sent from my iPhone using ZR-1 Net Registry

10-22-2017	#14
Ccmano Join Date: Jun 2006 Location: Sparks, NV Posts: 2,852	Re: Big Block Chevy swapped into ZR1 Also has an original 8k rpm tach... H __________________ 90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold.

10-23-2017	#18
efnfast Join Date: Nov 2011 Location: Dunbarton NH Posts: 7,468	Re: Big Block Chevy swapped into ZR1 This car has the spacers at the plate, so the rear must be wider than stock, hence born as a ZR-1?

10-23-2017	#19
cvette98pacecar Join Date: May 2011 Location: Sydney, Australia Posts: 2,479	Re: Big Block Chevy swapped into ZR1 Not a wide body. Rear taillights are skinny, that is why the room is there for the 3" filler plate for the licenese. But, I agree with the owner. first project after the current 2 are complete is a "572/800" big block. Can you say ZR-2. I already have the ZR-1 donner car. __________________ Robert J. DeMarco [SIGPIC][/SIGPIC] [COLOR=blue]G[/COLOR][COLOR=red]rand[/COLOR] [COLOR=blue]S[/COLOR][COLOR=red]port[/COLOR] Registry Lifetime Member NCM Lifetime Member #2655 Pacecar Registry Member [COLOR=red]ZOOM Charter Member - ZR-1 Owners of Michigan[/COLOR] [COLOR=plum][I]ZR-1[/I] Registry member since 2012 [/COLOR] [COLOR=black]1990 LPE "368" Aerobody ZR-1, Last ZR-1 built by John[/COLOR] 1991 Callaway Aerobody ZR-1, DRM 500 1991 Shinoda Aerobody Spyder, 1998 Pace Car Last edited by cvette98pacecar; 10-23-2017 at 11:27 AM.

10-23-2017	#20
lfalzarano Join Date: Feb 2011 Location: Clayton, North Carolina Posts: 1,133	Re: Big Block Chevy swapped into ZR1 It’s not a ZR-1. The rear wheel flares are from 1996 Grand Sport, the rear facia is a replacement (you will notice the area for 3rd brake light has been filled in and the Corvette logo is recessed, while ZR-1’s have raised Corvette logos), the 3rd brake light on the roof is consistent with all 1988-90 coupes, and the license place spacers are too narrow and so are the backup lights. It is not one of ours... [emoji17] Sent from my iPhone using ZR-1 Net Registry __________________ Lou[COLOR="Red"][B][SIZE="4"][/SIZE][/B][/COLOR]