Alternator upgrade - Page 2 - ZR-1 Net Registry Forums

dredgeguy · 04-24-2019

When Marc did the alternator upgrade on my car to 200 amp he also did the double wire to the AC blower. Before the mod air flow out my vent was at 10 mph and after it was 14 mph. I like it very much. Just spent 3 hours in Dhaka, Bangladesh traffic with no AC and can't wait to get home next week!

secondchance · 04-24-2019

Quote:

Originally Posted by dredgeguy

When Marc did the alternator upgrade on my car to 200 amp he also did the double wire to the AC blower. Before the mod air flow out my vent was at 10 mph and after it was 14 mph. I like it very much. Just spent 3 hours in Dhaka, Bangladesh traffic with no AC and can't wait to get home next week!

Hey Charlie! I added additional 18 ga. wire from the battery to the HVAC controller and fan's performance improved a lot also.

ghlkal · 04-24-2019

Quote:

Originally Posted by secondchance

Additional 8 ga. cable was added between the alternator post to battery to allow for additional current and, while at it, added additional 18 ga. between the battery and HVAC controller resulting in some extra oomph to HVAC fan.

The additional wiring is a great idea. I'll have to remember that.

-=Jeff=- · 04-25-2019

I called and Yes we can get a group price.. minimum for the group price will be 5..

I will post a thread with details later..

HAWAIIZR-1 · 04-25-2019

Quote:

Originally Posted by -=Jeff=-

I called and Yes we can get a group price.. minimum for the group price will be 5..

I will post a thread with details later..

Thanks Jeff!!!

Sent from my iPhone using ZR-1 Net Registry

secondchance · 04-26-2019

Should be able to round up 5 easily.
Tell Kevin I said "hi!".

-=Jeff=- · 04-26-2019

what is the benefit of this one vs the CS-144 from Power Master?

secondchance · 04-26-2019

Quote:

Originally Posted by -=Jeff=-

what is the benefit of this one vs the CS-144 from Power Master?

Hairpin alternators are suppose to produce higher amp at idle compared to conventional. Also, suppose to perform better at high temperature such as hot day, underhood condition.
Above are based on what I have read. Not been able to confirm so far.

-=Jeff=- · 07-26-2019

How is this holding up? been thinking about this again.. I noticed it mainly at idle. I have a couple ideas to try.. before dropping money on one of these.. Group buy never panned out.. nobody was interested. I think if I buy one, the stock power is fine, I just want better idle current

secondchance · 07-26-2019

Quote:

Originally Posted by -=Jeff=-

How is this holding up? been thinking about this again.. I noticed it mainly at idle. I have a couple ideas to try.. before dropping money on one of these.. Group buy never panned out.. nobody was interested. I think if I buy one, the stock power is fine, I just want better idle current

It's holding up fine. Last week in DC area was between 96 to 103 degrees. I never found myself in major traffic back up (a disappointment!) but evening commute meant about 15 minutes of bumper to bumper.
With Spal fans running at full speed, maximum coolant temp I saw was 211. Once it hit 211, temp started to come down and around 200-201 would go up to 208 and repeat. With fans running, voltage readout was 14.3 to 14.5 volts. Oil temp was steady at 197 but occasionally would go up to 201 to 202.
Dewitt dual core, 200 amp alternator and Spal fans definitely reeled in coolant temp concern in worst case scenario.
It would be interesting to compare voltage reading of stock 94 Z with OEM fans running vs. my setup, although not apple to apple.

04-24-2019	#11
dredgeguy Join Date: Aug 2012 Location: Ellicott City, MD Posts: 1,638	Re: Alternator upgrade When Marc did the alternator upgrade on my car to 200 amp he also did the double wire to the AC blower. Before the mod air flow out my vent was at 10 mph and after it was 14 mph. I like it very much. Just spent 3 hours in Dhaka, Bangladesh traffic with no AC and can't wait to get home next week! __________________ Charlie __________ Dredgeguy WAZOO Member 1992 Bright Red/Black ZR1 #246 Dana 4:10 gears Polished LT5 by Haibeck Polished Fikse FM5's with Michelin Pilot Sport 2 Stainless Works headers and cats with Corsa

04-25-2019	#14
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,137	Re: Alternator upgrade I called and Yes we can get a group price.. minimum for the group price will be 5.. I will post a thread with details later.. __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

04-26-2019	#16
secondchance Join Date: Aug 2006 Location: McLean, VA Posts: 3,707	Re: Alternator upgrade Should be able to round up 5 easily. Tell Kevin I said "hi!".

04-26-2019	#17
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,137	Re: Alternator upgrade what is the benefit of this one vs the CS-144 from Power Master? __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

07-26-2019	#19
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,137	Re: Alternator upgrade How is this holding up? been thinking about this again.. I noticed it mainly at idle. I have a couple ideas to try.. before dropping money on one of these.. Group buy never panned out.. nobody was interested. I think if I buy one, the stock power is fine, I just want better idle current __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978