Driveshaft removal for speedo gear swap. C-Beam out or not? - Page 2 - ZR-1 Net Registry Forums

scorp508 · 04-22-2024

Thanks phrogs, sounds like a good method to try when I dig into it.

scorp508 · 06-22-2024

I finally did this yesterday and phrogs is totally correct. I left the C-beam in and moved it towards the passenger side once unbolted. There was plenty of room to undo the rear strap bolts (I need to get a ratcheting wrench for those, ugh...) and pull the driveshaft with the beam still in the car.

04-22-2024	#11
scorp508 Join Date: Jan 2024 Location: Boston, MA Posts: 179	Re: Driveshaft removal for speedo gear swap. C-Beam out or not? Thanks phrogs, sounds like a good method to try when I dig into it.

06-22-2024	#12
scorp508 Join Date: Jan 2024 Location: Boston, MA Posts: 179	Re: Driveshaft removal for speedo gear swap. C-Beam out or not? I finally did this yesterday and phrogs is totally correct. I left the C-beam in and moved it towards the passenger side once unbolted. There was plenty of room to undo the rear strap bolts (I need to get a ratcheting wrench for those, ugh...) and pull the driveshaft with the beam still in the car. __________________ 1987: Z51 Coupe, Z51, 4+3, Yellow / Graphite 1994: ZR-1 #150, Admiral Blue / Black 2015: Z06 Coupe, Z07, M7, Arctic White / Red Last edited by scorp508; 06-24-2024 at 11:46 AM.