05-25-2014 | #131 |
Join Date: Aug 2006
Location: McLean, VA
Posts: 3,714
|
Re: Secondchance - 380 build begins!
|
05-25-2014 | #132 |
Join Date: Aug 2006
Location: McLean, VA
Posts: 3,714
|
Re: Secondchance - 380 build begins!
#1 intake set up for camshaft timing.
A long story short, first TBC was determined and degree wheel set to 0. Then, camshafts were set up using factory dowel method to get them in proximity. Degree wheel method confirmed right side intake using dowel method yielded 118 degrees - 4 degrees off. Degree wheel method on #1 cylinder and #6 cylinder was used to set intake @114 and exhaust @109. Setting camshaft timing using degree wheel and digital gage is a long and mind bending experience for those who do this occasionally. A great big THANK YOU Phil!!! - I am just a helper Last edited by secondchance; 05-25-2014 at 05:58 PM. |
05-26-2014 | #133 |
Join Date: Aug 2006
Location: McLean, VA
Posts: 3,714
|
Re: Secondchance - 380 build begins!
Phil noticed carbon build up on the spark plug seats.
So, he makes a custom tool to plug the spark plug thread and cleaning tool that slips over the plug. Windage tray and pick up. Fully assembled minus oil filter housing and water pump. 380 is finally complete for installation. Just need to install oil filter housing and water pump. Thank you Phil, Jim, Lee, Jerry, Ryan and the WAZOO gang! Last edited by secondchance; 05-26-2014 at 09:31 PM. |
05-26-2014 | #134 | |
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,388
|
Re: Secondchance - 380 build begins!
Quote:
It looks great and will surely draw a h_ly sh_t! from you the first time you put the hammer down through 3rd gear (my very favorite gear). Might be a good phone video from the passenger seat.
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
05-27-2014 | #135 |
Join Date: Dec 2012
Location: NC
Posts: 1,786
|
Re: Secondchance - 380 build begins!
Lookin' good!
Hopefully not a typical Z project, like mine seem so often to be, where it looks like I'm about done, and it turns out that I'm ABOUT started, actually...
__________________
I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads... ( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b] Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc... 1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3" [IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG] |
05-28-2014 | #136 |
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: Secondchance - 380 build begins!
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
05-28-2014 | #137 |
Join Date: Aug 2006
Location: McLean, VA
Posts: 3,714
|
Re: Secondchance - 380 build begins!
|
05-28-2014 | #138 |
Join Date: Aug 2006
Location: McLean, VA
Posts: 3,714
|
Re: Secondchance - 380 build begins!
Lee,
Also, don't forget to send torx bolts for the airhorn please. |
05-28-2014 | #139 |
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: Secondchance - 380 build begins!
Ok, heading to FedEx now, will see what I can do...I thought the schedule was pushed out
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
05-29-2014 | #140 |
Join Date: May 2007
Location: Westminster, Maryland
Posts: 3,689
|
Re: Secondchance - 380 build begins!
Yun, If the air horn doesn't make it in time, I will provide a loaner. No Worries!
Jim |
|
|