Cam Cover Emblems - Page 13 - ZR-1 Net Registry Forums

Eric870 · 07-08-2009

Nice job Lee! Put me down for a set of the 90's.

Thanks
Eric

4DSZR1 · 07-08-2009

Quote:

Originally Posted by limey

They look the tits! Let me know ......and estimated delivery time.

I have the same question to YOU on the item I bought from you on ebay? How come no reply to my email?

Thanks

LGAFF · 07-08-2009

I did the heat test today cranked it up to 400 and paint held up...although this is not a complete test as it is not warming and cooling. I decided that I am going to coat in high temp clear.

Also I noticed that the edges on the outer ring on some samples were sticking out too much, this was keeping the emblem from sitting perfectly flush. I am going to have them take .25MM off the edge and these will be perfect.

This is a simple fix but I would rather avoid quality issues.

xlr8nflorida · 07-09-2009

Quote:

Originally Posted by LGAFF

I did the heat test today cranked it up to 400 and paint held up...although this is not a complete test as it is not warming and cooling. I decided that I am going to coat in high temp clear.

Also I noticed that the edges on the outer ring on some samples were sticking out too much, this was keeping the emblem from sitting perfectly flush. I am going to have them take .25MM off the edge and these will be perfect.

This is a simple fix but I would rather avoid quality issues.

I'll take a set or two.

LGAFF · 07-19-2009

Well, I am testing coatings, I added the emblems to my 90 ZR-1, one side completely coated in VHT ceramic paint, and the other in wheel paint, but I did not coat the checked flag or the red.

So far both held up through a 30 minute drive...no bubbling, yellowing or other. I hope to have completed more coating testing prior to the final revision.

Interesting note, the cam emeblem provisions from left to right, drivers side is bigger, passenger side smaller. The current version I have made fits perfectly on the drivers side, passenger side is slightly too large(which is why they are modding)

Aurora40 · 07-19-2009

Wow, those really look good! Nice work in tweaking them to get the just right! When you are ready to take orders, I'm definitely in.

RICKYRJ1 · 07-19-2009

You have gone way beyond the call of duty on getting these things done. A true asset to this small community. THANKS

I'll take 3 sets for a 95'

billybaloneey · 07-19-2009

You can add me to you list for a pair for my '94.

902066 · 07-19-2009

If this is the official order list, please put me down for a pair of 90 emblems. If you are not ready yet let us know when to order and how to pay. Thanks for your efforts.

carter200 · 07-20-2009

Quote:

Originally Posted by LGAFF

Interesting note, the cam emeblem provisions from left to right, drivers side is bigger, passenger side smaller. The current version I have made fits perfectly on the drivers side, passenger side is slightly too large(which is why they are modding)

Lee,
Looks like you need to sell a right and left side emblem to have perfect fit on both sides. Great work

07-08-2009	#121
Eric870 Join Date: Apr 2009 Location: Portland OR Posts: 165	Re: Cam Cover Emblems Nice job Lee! Put me down for a set of the 90's. Thanks Eric

07-08-2009	#123
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,180	Re: Cam Cover Emblems I did the heat test today cranked it up to 400 and paint held up...although this is not a complete test as it is not warming and cooling. I decided that I am going to coat in high temp clear. Also I noticed that the edges on the outer ring on some samples were sticking out too much, this was keeping the emblem from sitting perfectly flush. I am going to have them take .25MM off the edge and these will be perfect. This is a simple fix but I would rather avoid quality issues. __________________ LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 Last edited by LGAFF; 07-08-2009 at 10:33 PM.

07-19-2009	#125
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,180	Re: Cam Cover Emblems Well, I am testing coatings, I added the emblems to my 90 ZR-1, one side completely coated in VHT ceramic paint, and the other in wheel paint, but I did not coat the checked flag or the red. So far both held up through a 30 minute drive...no bubbling, yellowing or other. I hope to have completed more coating testing prior to the final revision. Interesting note, the cam emeblem provisions from left to right, drivers side is bigger, passenger side smaller. The current version I have made fits perfectly on the drivers side, passenger side is slightly too large(which is why they are modding) __________________ LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359

07-19-2009	#126
Aurora40 Join Date: May 2005 Location: Leesburg, VA Posts: 2,704	Re: Cam Cover Emblems Wow, those really look good! Nice work in tweaking them to get the just right! When you are ready to take orders, I'm definitely in.

07-19-2009	#127
RICKYRJ1 Join Date: Dec 2005 Location: Tinton Falls, NJ Posts: 1,169	Re: Cam Cover Emblems You have gone way beyond the call of duty on getting these things done. A true asset to this small community. THANKS I'll take 3 sets for a 95'

07-19-2009	#128
billybaloneey Join Date: May 2008 Location: Mauriceville, Texas Posts: 179	Re: Cam Cover Emblems You can add me to you list for a pair for my '94.

07-19-2009	#129
902066 Join Date: Jul 2005 Posts: 190	Re: Cam Cover Emblems If this is the official order list, please put me down for a pair of 90 emblems. If you are not ready yet let us know when to order and how to pay. Thanks for your efforts.