My 1990 ZR-1 #2342 from SPAIN. - Page 12 - ZR-1 Net Registry Forums

1977CamaroZ28 · 11-07-2022

On the way to Barcelona...

1977CamaroZ28 · 11-07-2022

10 O'Clock at workshop:

And get on with it!!

1977CamaroZ28 · 11-07-2022

1977CamaroZ28 · 11-07-2022

The new one identical to old one.

1977CamaroZ28 · 11-07-2022

On the way at home visiting my parents

And that's all!! My car on the road again looking for time to roll again.

1977CamaroZ28 · 12-11-2022

After many weeks with bad weather and few time to drive my ZR-1, yesterday we had a sunny day!! It deserves to share with all of you here...

Castellon Airport in the morning:

1977CamaroZ28 · 12-28-2022

Hi and Merry Christmas!!

Again my Corvette flying... I have some holidays and, previously to wheel restoration, I decided to install pressure sensors with a good friend in Valencia.

My car only has gren one (front left) and now I put blue, orange and yellow ones to complete the system.

1977CamaroZ28 · 12-28-2022

Without installation problems we tryed with an old balance machine and we had a lot of problems to obtain 0 gram!! We tryed some times but the wheels weren't balanced. Next week I will visit another friend with a new machine. Now the car is continuously jumping when you drive at 130 Km/h (80 miles/h)

1977CamaroZ28 · 01-15-2023

Hi again!! I'm back with more last saturday morning pictures.

Yesterday I visited my friends at Sanz Sport in Valencia to fix wheel balance problem with pressure sensors installed.

Now it is so hard to find good results because of extra weight in each wheel. Complete sensor weights 230 grams. And for that extra weight it's necessary to spend more time to obtain good results.

After one morning fighting with front right and rear left wheels the car is near to perfection but not perfect.

After this second attemp all the vibrations between 110 Km/h to 140 Km/h desappeared. But now, still remain a very little vibrations between 140 Km/h to 180 Km/h. Very little but perceptible. Next saturday morning we will try again with these two wheels trying to rotate rubber to change "jump wheel moment" to eliminate definitely vibrations.

I know... I recognise... I'm so obstinate to drive my ZR-1 in its original factory conditions, but, if the problem persists, I will return the car to its last situation with only one sensor (front left one) like last eigth years.

1977CamaroZ28 · 01-15-2023

11-07-2022	#111
1977CamaroZ28 Join Date: Jul 2015 Location: Jerica - SPAIN Posts: 313	Re: My 1990 ZR-1 #2342 from SPAIN. On the way to Barcelona... __________________ 1.990 Chevrolet Corvette ZR-1 #2342 - Black/Black - March 1.990 - OBX Headers and OBX complete Exhaust Line (No Cats). K&N Air Filter with open Air Box. Jerry's Gaskets Silicone Air Duct. DeWitts Two Row Pro Series Radiator. Samco's Hose Coolant Kit. ECM/EPROM Improved. MSD Spark Plug Wires 8,5mm Super Conductor. EBC Brakes YellowStuff with EBC D-Series Rotors and Raybestos hoses. Last edited by 1977CamaroZ28; 11-09-2022 at 12:27 PM.

11-07-2022	#112
1977CamaroZ28 Join Date: Jul 2015 Location: Jerica - SPAIN Posts: 313	Re: My 1990 ZR-1 #2342 from SPAIN. 10 O'Clock at workshop: And get on with it!! __________________ 1.990 Chevrolet Corvette ZR-1 #2342 - Black/Black - March 1.990 - OBX Headers and OBX complete Exhaust Line (No Cats). K&N Air Filter with open Air Box. Jerry's Gaskets Silicone Air Duct. DeWitts Two Row Pro Series Radiator. Samco's Hose Coolant Kit. ECM/EPROM Improved. MSD Spark Plug Wires 8,5mm Super Conductor. EBC Brakes YellowStuff with EBC D-Series Rotors and Raybestos hoses. Last edited by 1977CamaroZ28; 11-09-2022 at 12:29 PM.

11-07-2022	#113
1977CamaroZ28 Join Date: Jul 2015 Location: Jerica - SPAIN Posts: 313	Re: My 1990 ZR-1 #2342 from SPAIN. __________________ 1.990 Chevrolet Corvette ZR-1 #2342 - Black/Black - March 1.990 - OBX Headers and OBX complete Exhaust Line (No Cats). K&N Air Filter with open Air Box. Jerry's Gaskets Silicone Air Duct. DeWitts Two Row Pro Series Radiator. Samco's Hose Coolant Kit. ECM/EPROM Improved. MSD Spark Plug Wires 8,5mm Super Conductor. EBC Brakes YellowStuff with EBC D-Series Rotors and Raybestos hoses. Last edited by 1977CamaroZ28; 11-09-2022 at 12:31 PM.

11-07-2022	#114
1977CamaroZ28 Join Date: Jul 2015 Location: Jerica - SPAIN Posts: 313	Re: My 1990 ZR-1 #2342 from SPAIN. The new one identical to old one. __________________ 1.990 Chevrolet Corvette ZR-1 #2342 - Black/Black - March 1.990 - OBX Headers and OBX complete Exhaust Line (No Cats). K&N Air Filter with open Air Box. Jerry's Gaskets Silicone Air Duct. DeWitts Two Row Pro Series Radiator. Samco's Hose Coolant Kit. ECM/EPROM Improved. MSD Spark Plug Wires 8,5mm Super Conductor. EBC Brakes YellowStuff with EBC D-Series Rotors and Raybestos hoses. Last edited by 1977CamaroZ28; 11-09-2022 at 12:32 PM.

11-07-2022	#115
1977CamaroZ28 Join Date: Jul 2015 Location: Jerica - SPAIN Posts: 313	Re: My 1990 ZR-1 #2342 from SPAIN. On the way at home visiting my parents And that's all!! My car on the road again looking for time to roll again. __________________ 1.990 Chevrolet Corvette ZR-1 #2342 - Black/Black - March 1.990 - OBX Headers and OBX complete Exhaust Line (No Cats). K&N Air Filter with open Air Box. Jerry's Gaskets Silicone Air Duct. DeWitts Two Row Pro Series Radiator. Samco's Hose Coolant Kit. ECM/EPROM Improved. MSD Spark Plug Wires 8,5mm Super Conductor. EBC Brakes YellowStuff with EBC D-Series Rotors and Raybestos hoses. Last edited by 1977CamaroZ28; 11-09-2022 at 12:35 PM.

12-11-2022	#116
1977CamaroZ28 Join Date: Jul 2015 Location: Jerica - SPAIN Posts: 313	Re: My 1990 ZR-1 #2342 from SPAIN. After many weeks with bad weather and few time to drive my ZR-1, yesterday we had a sunny day!! It deserves to share with all of you here... Castellon Airport in the morning: __________________ 1.990 Chevrolet Corvette ZR-1 #2342 - Black/Black - March 1.990 - OBX Headers and OBX complete Exhaust Line (No Cats). K&N Air Filter with open Air Box. Jerry's Gaskets Silicone Air Duct. DeWitts Two Row Pro Series Radiator. Samco's Hose Coolant Kit. ECM/EPROM Improved. MSD Spark Plug Wires 8,5mm Super Conductor. EBC Brakes YellowStuff with EBC D-Series Rotors and Raybestos hoses.

12-28-2022	#117
1977CamaroZ28 Join Date: Jul 2015 Location: Jerica - SPAIN Posts: 313	Re: My 1990 ZR-1 #2342 from SPAIN. Hi and Merry Christmas!! Again my Corvette flying... I have some holidays and, previously to wheel restoration, I decided to install pressure sensors with a good friend in Valencia. My car only has gren one (front left) and now I put blue, orange and yellow ones to complete the system. __________________ 1.990 Chevrolet Corvette ZR-1 #2342 - Black/Black - March 1.990 - OBX Headers and OBX complete Exhaust Line (No Cats). K&N Air Filter with open Air Box. Jerry's Gaskets Silicone Air Duct. DeWitts Two Row Pro Series Radiator. Samco's Hose Coolant Kit. ECM/EPROM Improved. MSD Spark Plug Wires 8,5mm Super Conductor. EBC Brakes YellowStuff with EBC D-Series Rotors and Raybestos hoses.

12-28-2022	#118
1977CamaroZ28 Join Date: Jul 2015 Location: Jerica - SPAIN Posts: 313	Re: My 1990 ZR-1 #2342 from SPAIN. Without installation problems we tryed with an old balance machine and we had a lot of problems to obtain 0 gram!! We tryed some times but the wheels weren't balanced. Next week I will visit another friend with a new machine. Now the car is continuously jumping when you drive at 130 Km/h (80 miles/h) __________________ 1.990 Chevrolet Corvette ZR-1 #2342 - Black/Black - March 1.990 - OBX Headers and OBX complete Exhaust Line (No Cats). K&N Air Filter with open Air Box. Jerry's Gaskets Silicone Air Duct. DeWitts Two Row Pro Series Radiator. Samco's Hose Coolant Kit. ECM/EPROM Improved. MSD Spark Plug Wires 8,5mm Super Conductor. EBC Brakes YellowStuff with EBC D-Series Rotors and Raybestos hoses. Last edited by 1977CamaroZ28; 12-28-2022 at 07:04 PM.

01-15-2023	#119
1977CamaroZ28 Join Date: Jul 2015 Location: Jerica - SPAIN Posts: 313	Re: My 1990 ZR-1 #2342 from SPAIN. Hi again!! I'm back with more last saturday morning pictures. Yesterday I visited my friends at Sanz Sport in Valencia to fix wheel balance problem with pressure sensors installed. Now it is so hard to find good results because of extra weight in each wheel. Complete sensor weights 230 grams. And for that extra weight it's necessary to spend more time to obtain good results. After one morning fighting with front right and rear left wheels the car is near to perfection but not perfect. After this second attemp all the vibrations between 110 Km/h to 140 Km/h desappeared. But now, still remain a very little vibrations between 140 Km/h to 180 Km/h. Very little but perceptible. Next saturday morning we will try again with these two wheels trying to rotate rubber to change "jump wheel moment" to eliminate definitely vibrations. I know... I recognise... I'm so obstinate to drive my ZR-1 in its original factory conditions, but, if the problem persists, I will return the car to its last situation with only one sensor (front left one) like last eigth years. __________________ 1.990 Chevrolet Corvette ZR-1 #2342 - Black/Black - March 1.990 - OBX Headers and OBX complete Exhaust Line (No Cats). K&N Air Filter with open Air Box. Jerry's Gaskets Silicone Air Duct. DeWitts Two Row Pro Series Radiator. Samco's Hose Coolant Kit. ECM/EPROM Improved. MSD Spark Plug Wires 8,5mm Super Conductor. EBC Brakes YellowStuff with EBC D-Series Rotors and Raybestos hoses.

01-15-2023	#120
1977CamaroZ28 Join Date: Jul 2015 Location: Jerica - SPAIN Posts: 313	Re: My 1990 ZR-1 #2342 from SPAIN. __________________ 1.990 Chevrolet Corvette ZR-1 #2342 - Black/Black - March 1.990 - OBX Headers and OBX complete Exhaust Line (No Cats). K&N Air Filter with open Air Box. Jerry's Gaskets Silicone Air Duct. DeWitts Two Row Pro Series Radiator. Samco's Hose Coolant Kit. ECM/EPROM Improved. MSD Spark Plug Wires 8,5mm Super Conductor. EBC Brakes YellowStuff with EBC D-Series Rotors and Raybestos hoses.