ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 01-24-2009   #31
WB9MCW
 
WB9MCW's Avatar
 
Join Date: Dec 2003
Location: McHenry, Il.
Posts: 6,607
Default Re: high idle

Quote:
Originally Posted by tpepmeie View Post
I'm with Ted... the canister purge hose under the front driver side of the plenum is likely disconnected, which will cause the massive air leak = high idle. That was the first troubleshooting I did on my '91 back in 1999.
This was an early post in the thread that was telling you of this common problem
__________________
http://i119.photobucket.com/albums/o...9mcw/SIG-2.jpg
http://i119.photobucket.com/albums/o128/wb9mcw/vcm.gif
"The Budget should be balanced, the Treasury should be refilled, public debt should be reduced, the arrogance of officialdom should be tempered and controlled, and the assistance to foreign lands should be curtailed, lest Rome will become bankrupt. People must again learn to work instead of living on public assistance." - Cicero, 55 BC
" We the people are the rightful masters of both Congress and the courts, not to overthrow the Constitution but to overthrow the men who pervert the Constitution." - Abraham Lincoln
WB9MCW is offline   Reply With Quote
Old 01-24-2009   #32
WB9MCW
 
WB9MCW's Avatar
 
Join Date: Dec 2003
Location: McHenry, Il.
Posts: 6,607
Default Re: high idle

Quote:
Originally Posted by XfireZ51 View Post
He mentioned that it had a high idle even before he did the plenum removal.
So whatever is causing high idle hasn't been affected.
Surprising he 's not getting code for LO TPS V.
But a pointed out here this does not seem to be your issue.

Perhaps it is the PROM chip thing.

For those of us lucky to live close to Haibeck a simple drive to his shop and review would be the key to success.

You may want to email him and have him read this thread and work with you to solve your issues IMO.

He would know best what to try next and get you to an ultimate solution.

That is why he is the ZR-1 specialist. No one knows em like Haibeck does as many will attest too.

Now there are others who are also very good with the ZR-1's like SGC and DRM not to slight them at all. Or Jeff at PNW ZR-1.

But I like to support those who advertise here >> http://zr1netregistry.com/index.htm

or like Jeff who is on the forum here all the time with advise etc.

We support those who support us.
__________________
http://i119.photobucket.com/albums/o...9mcw/SIG-2.jpg
http://i119.photobucket.com/albums/o128/wb9mcw/vcm.gif
"The Budget should be balanced, the Treasury should be refilled, public debt should be reduced, the arrogance of officialdom should be tempered and controlled, and the assistance to foreign lands should be curtailed, lest Rome will become bankrupt. People must again learn to work instead of living on public assistance." - Cicero, 55 BC
" We the people are the rightful masters of both Congress and the courts, not to overthrow the Constitution but to overthrow the men who pervert the Constitution." - Abraham Lincoln

Last edited by WB9MCW; 01-24-2009 at 02:47 PM.
WB9MCW is offline   Reply With Quote
Old 01-24-2009   #33
Jeffvette
Guest
 
Posts: n/a
Default Re: high idle

Quote:
Originally Posted by WB9MCW View Post
And often a backfire will blow that MAP hose loose causing a high idle
Wrong MAP sensor.
  Reply With Quote
Old 01-24-2009   #34
WB9MCW
 
WB9MCW's Avatar
 
Join Date: Dec 2003
Location: McHenry, Il.
Posts: 6,607
Default Re: high idle

Quote:
Originally Posted by Jeffvette View Post
Wrong MAP sensor.
OK you know I thought it did not sound like the right one.

At any rate I'll let you tell em which one
__________________
http://i119.photobucket.com/albums/o...9mcw/SIG-2.jpg
http://i119.photobucket.com/albums/o128/wb9mcw/vcm.gif
"The Budget should be balanced, the Treasury should be refilled, public debt should be reduced, the arrogance of officialdom should be tempered and controlled, and the assistance to foreign lands should be curtailed, lest Rome will become bankrupt. People must again learn to work instead of living on public assistance." - Cicero, 55 BC
" We the people are the rightful masters of both Congress and the courts, not to overthrow the Constitution but to overthrow the men who pervert the Constitution." - Abraham Lincoln
WB9MCW is offline   Reply With Quote
Old 02-01-2009   #35
Jarek5_7
 
Join Date: Aug 2008
Location: Radom, Poland
Posts: 38
Default Re: high idle

I hooked up the secondary map corectly and checked all the vacuum hoses, changed check valves. Now the secondary system works! and car pulls great, I think I still has a little vacuum leak but I think its from pcv valves, I will have those new in couple of days and we`ll see when I replace them.

aslo I changed pilot bearing because of tranny noise, luckly as me and Bill Boudreau / zfdoc.com (which send me a long email with some advice) thought the source of tranny noise was the pilot bearing. Now the zf6 doesnt produce any noise and is really quiet.
__________________
1991 zr1 convertible ;)
Jarek5_7 is offline   Reply With Quote
Old 02-01-2009   #36
WB9MCW
 
WB9MCW's Avatar
 
Join Date: Dec 2003
Location: McHenry, Il.
Posts: 6,607
Default Re: high idle

Hey J your getting there buddy!

Good to hear your rolling now a pulling hard

That is great that Bill took the time to email you and help out -- good guy that Bill-- He goes the extra yard for ZRONERS
__________________
http://i119.photobucket.com/albums/o...9mcw/SIG-2.jpg
http://i119.photobucket.com/albums/o128/wb9mcw/vcm.gif
"The Budget should be balanced, the Treasury should be refilled, public debt should be reduced, the arrogance of officialdom should be tempered and controlled, and the assistance to foreign lands should be curtailed, lest Rome will become bankrupt. People must again learn to work instead of living on public assistance." - Cicero, 55 BC
" We the people are the rightful masters of both Congress and the courts, not to overthrow the Constitution but to overthrow the men who pervert the Constitution." - Abraham Lincoln
WB9MCW is offline   Reply With Quote
Old 02-01-2009   #37
tomtom72
 
tomtom72's Avatar
 
Join Date: Dec 2004
Location: Jacksonville, FL USA
Posts: 4,645
Default Re: high idle

On the PCV valves.....I bought new top F shaped connector and new injector housing connectors back in 05. I installed them and they worked great for awhile. Now I just gave up and bought the expensive SAMCO replacement PCV top and bottom hose set from LIMEY.

I do believe if you use the car enough that the amount of oil blow by in our PCV system degrades the rubber PCV parts made from standard rubber in a fairly short time so that they start to leak slightly. As time goes by they degrade progressively and the small leaks become bigger & bigger & bigger.

This is JMHO. The only thing I know for sure is that the new rubber connectors were tight up to about a yr ago. They don't seem to last long.


Tom
__________________
1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member
tomtom72 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:03 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020