ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 09-23-2008   #1
mrzzzr1
 
mrzzzr1's Avatar
 
Join Date: Jun 2004
Location: Mi
Posts: 57
Default A/C not producing sufficient cold air

Have replaced the Electronic HVAC Controller with one my mechanic found on the west coast. GM original not available any longer. (Original controller was erratic a/c delayed for a period and also cut in and out whenever it felt like).
Have done 2-3 rechages the first two with dye and no leak detected although the feon was down ~.2 lbs. after a couple weeks.
Converted the old R-12 with new R-134a to reduce freon rechage cost.

Mechanic says he has done everything he can. Says the only thing left is there may be a pin hole leak in the evaporator core and he can't, or doesn't want, to fix it.

Have run the a/c for a couple months since with not much change. When it is hot I max out the temp at 60 and the fan on high and it barely keeps up.

A/C only seems to run on "AUTO" setting (is this they way it is supposed to work). When I run the outside air though the system (upr and lwr vents) without a/c it still seems to produce a/c sometimes (another bad HVAC controller).

Any ideas or suggestions are appreciated.
I think I have spent way too much time and money chasing this one.
__________________
1990 Red on Red
vin #2433
mrzzzr1 is offline   Reply With Quote
Old 09-23-2008   #2
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
Default Re: A/C not producing sufficient cold air

what is the volume of air out the vents like? the Evap gets pretty gummed up so the amount of air is reduced as well..

As for the AC Controller I have one from a 90, it was verified good in another Z owners car.. if you need it.

Sounds like a A/C programmer issue though
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is offline   Reply With Quote
Old 09-23-2008   #3
Jeffvette
Guest
 
Posts: n/a
Default Re: A/C not producing sufficient cold air

You've got two components which people seem to confuse:

HVAC controller which is the dash unit
HVAC programmer which is just above the gas pedal

People call these the same thing sometimes. When you are not getting dash air control, it is usually the programmer and or the vent door assembly.
  Reply With Quote
Old 09-23-2008   #4
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
Default Re: A/C not producing sufficient cold air

AC will only run in AUTO unless you lower the fan speed from 10 Highest speed to a lower speed . You will notice then the green light above the auto will turn off but the AC still runs at the operators directed speed. I had a problem simular to this the AC would turn on when it wanted etc etc. Volume of air was great sometimes not so great other times. I ended up replacing the blower motor. A $40 fix and solved the intermitant problem. A fully functioning blower is critical and will cause suitcase/vent controller issues. Other than that a AC programmer above the footwell or a plugged evap as already stated. I would suggest the $40 fix first. The programmer is a bear to find. GC
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)

GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V

Last edited by GOLDCYLON; 09-23-2008 at 04:24 PM.
GOLDCYLON is offline   Reply With Quote
Old 09-23-2008   #5
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
Default Re: A/C not producing sufficient cold air

Quote:
Originally Posted by GOLDCYLON
The programmer is a bear to find. GC
Nah finding is easy.. getting under there to R&R that takes some work
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is offline   Reply With Quote
Old 09-23-2008   #6
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
Default Re: A/C not producing sufficient cold air

Quote:
Originally Posted by -=Jeff=-
Nah finding is easy.. getting under there to R&R that takes some work
Well thats true Jeff but I was refering to how hard it was to get the replacement part. R&R under there is a little more than a bear its a Bi--h

Unless your name is Jeffvette he lives for tight places.... LOL
And $1s $5 and $10 and dancing is involved
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)

GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V

Last edited by GOLDCYLON; 09-23-2008 at 04:42 PM.
GOLDCYLON is offline   Reply With Quote
Old 09-23-2008   #7
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
Default Re: A/C not producing sufficient cold air

Quote:
Originally Posted by GOLDCYLON
Well thats true Jeff but I was refering to how hard it was to get the replacement part. R&R under there is a little more than a bear its a Bi--h
yep, we are both ont he same page..
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is offline   Reply With Quote
Old 09-26-2008   #8
mrzzzr1
 
mrzzzr1's Avatar
 
Join Date: Jun 2004
Location: Mi
Posts: 57
Default Re: A/C not producing sufficient cold air

Volume of air seems good and the blower seems to be doing its job. The temp of the air is not real cold though.
__________________
1990 Red on Red
vin #2433
mrzzzr1 is offline   Reply With Quote
Old 09-26-2008   #9
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
Default Re: A/C not producing sufficient cold air

Quote:
Originally Posted by mrzzzr1 View Post
Volume of air seems good and the blower seems to be doing its job. The temp of the air is not real cold though.
Ok then move onto the contoller
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)

GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V
GOLDCYLON is offline   Reply With Quote
Old 09-26-2008   #10
Aurora40
 
Aurora40's Avatar
 
Join Date: May 2005
Location: Leesburg, VA
Posts: 2,713
Default Re: A/C not producing sufficient cold air

You haven't actually said if the compressor cycles on?
__________________
Bob Saveland
Former owner of #2517

[IMG]http://a.random-image.net/aurora40/vette.jpg[/img]
Aurora40 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:44 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020