ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 General Postings

Reply
 
Thread Tools Display Modes
Old 05-29-2008   #1
32valvZ
 
32valvZ's Avatar
 
Join Date: Nov 2007
Location: Sunshine State
Posts: 1,071
Default SW Headers....just DO IT!!!

Well, the headers are on I all I can say it WOW! The sound is great & I notice an improved throttle response as well as what seems like an increase in power at the top of 1st,2nd & third gear.

If your on the fence about these, just buy em'. Even though I took it in the a s s from SW on price, I like the results and the fit & finish was excellent. This job is really not the big huge deal everyone makes it out to be. If youve done SBC headers on other cars, its basically the same, just a little more cramped. Just make sure you have the proper tools and some patience.

With Nicks write up on the PNWZR1 site & a few phone calls to Jeff for some pointers and parts, things went great. Thanks again Jeff!
__________________
[B]1990 #2815[/B]
[COLOR="Red"][B]Red/Red[/B][/COLOR]
Ported Plenum & IH (by Pete)
Haibeck Chip
Rebuilt FPR (by Phil)
FIC Injectors
Watson LT Headers
3" Stainless Works exhaust
Lingenfelter Open Air Lid
Bill B Built Transmission
Shifter & C Beam Plates


[FONT=Impact][COLOR=red]1992 [COLOR=black]#[/COLOR] 091[/COLOR][/FONT]
[FONT=Impact][COLOR=#ff0000]Red/[COLOR=silver]Gray[/COLOR][/COLOR][/FONT]
[B]SOLD[/B]
32valvZ is offline   Reply With Quote
Old 05-29-2008   #2
Hammer
 
Hammer's Avatar
 
Join Date: Apr 2006
Location: Ideho
Posts: 2,653
Talking Re: SW Headers....just DO IT!!!

Quote:
Originally Posted by 32valvZ
Well, the headers are on I all I can say it WOW! The sound is great & I notice an improved throttle response as well as what seems like an increase in power at the top of 1st,2nd & third gear.

If your on the fence about these, just buy em'. Even though I took it in the a s s from SW on price, I like the results and the fit & finish was excellent. This job is really not the big huge deal everyone makes it out to be. If youve done SBC headers on other cars, its basically the same, just a little more cramped. Just make sure you have the proper tools and some patience.

With Nicks write up on the PNWZR1 site & a few phone calls to Jeff for some pointers and parts, things went great. Thanks again Jeff!
I agree, I got some Watson Small Tubes from Demps and what a difference. Biggest bang for the buck I've seen. Went from a 12.95 @ 109 last year to a 12.53 @ 113 with a slipping clutch (fixed that), and this was with just the header install and Marc's chip retuned for the headers.
__________________
[I][FONT=Comic Sans MS]John Boyd[/FONT][/I]
[I][FONT=Comic Sans MS][SIZE=1]Ideho[/SIZE][/FONT][/I]
[FONT=Comic Sans MS][SIZE=1][I]2015 ZL1 [/I][I]Camaro #1121 BLACK/BLACK 6 SPD (540 RWHP)[/I][/SIZE][/FONT]
[I][FONT=Comic Sans MS][SIZE=1]1991 ZR-1 #458 [COLOR=red]RED/[/COLOR][COLOR=black]BLACK 72[/COLOR]k miles ([B][COLOR=red]SOLD[/COLOR][/B])
1991 ZR-1 #473 [COLOR=red]RED/[/COLOR][COLOR=black]BLACK [/COLOR]37k miles ([B][COLOR=red]SOLD[/COLOR][/B])[/SIZE][/FONT][/I]
Hammer is offline   Reply With Quote
Old 05-29-2008   #3
Nick
 
Join Date: Jul 2005
Location: Auburn, Washington
Posts: 586
Default Re: SW Headers....just DO IT!!!

Quote:
Originally Posted by 32valvZ
Well, the headers are on I all I can say it WOW! The sound is great & I notice an improved throttle response as well as what seems like an increase in power at the top of 1st,2nd & third gear.

If your on the fence about these, just buy em'. Even though I took it in the a s s from SW on price, I like the results and the fit & finish was excellent. This job is really not the big huge deal everyone makes it out to be. If youve done SBC headers on other cars, its basically the same, just a little more cramped. Just make sure you have the proper tools and some patience.

With Nicks write up on the PNWZR1 site & a few phone calls to Jeff for some pointers and parts, things went great. Thanks again Jeff!
Glad to hear it went well! Have fun.
__________________
Nick
ZR-1 Net Registry Founding Member #32 - lapsed...
Nick is offline   Reply With Quote
Old 05-29-2008   #4
We Gone
 
Join Date: Apr 2004
Location: ATL. GA.
Posts: 2,168
Default Re: SW Headers....just DO IT!!!

I’ll second that .. Best mod I have done so far, and I thought WTL5 sounded good before, I keep the back glass open with a hatch vent just so I can listen.
We Gone is offline   Reply With Quote
Old 05-29-2008   #5
Ltfive
 
Ltfive's Avatar
 
Join Date: Jan 2008
Location: San Jose
Posts: 43
Default Re: SW Headers....just DO IT!!!

What'd you do after the headers? Cats, exhaust?
Ltfive is offline   Reply With Quote
Old 05-29-2008   #6
32valvZ
 
32valvZ's Avatar
 
Join Date: Nov 2007
Location: Sunshine State
Posts: 1,071
Default Re: SW Headers....just DO IT!!!

Quote:
Originally Posted by Ltfive
What'd you do after the headers? Cats, exhaust?
No cats, B&B (old style) with resonator
__________________
[B]1990 #2815[/B]
[COLOR="Red"][B]Red/Red[/B][/COLOR]
Ported Plenum & IH (by Pete)
Haibeck Chip
Rebuilt FPR (by Phil)
FIC Injectors
Watson LT Headers
3" Stainless Works exhaust
Lingenfelter Open Air Lid
Bill B Built Transmission
Shifter & C Beam Plates


[FONT=Impact][COLOR=red]1992 [COLOR=black]#[/COLOR] 091[/COLOR][/FONT]
[FONT=Impact][COLOR=#ff0000]Red/[COLOR=silver]Gray[/COLOR][/COLOR][/FONT]
[B]SOLD[/B]
32valvZ is offline   Reply With Quote
Old 05-30-2008   #7
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,154
Default Re: SW Headers....just DO IT!!!

Quote:
Originally Posted by 32valvZ
No cats, B&B (old style) with resonator

Well that explains the sudden boost!!!!!!!!!!!!
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)

GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V
GOLDCYLON is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:20 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020