|
05-21-2008
|
#1 |
 
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
What do i need to hit 11.9-12.2 range
Here's the current setup:
-Intake/Plenum/port matched to 36mm -Watson Headers -No CATs -X-Pipe -4:09 gear -DRM Chip -Borla mufflers -63MM TB -Coolant Bypass **Not a big fan of drag radials LGAFF 92 ZR1 #234 |
|
|
|
05-21-2008
|
#2 | |
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
|
Re: What do i need to hit 11.9-12.2 range
Quote:
Also what is your current 60'?? (My guess is 2.1-2.2) getting that down will help too.. I need to look at my old time slips.. btu I know my most recent ones from the 89 I was cutting 1.79 60ft. Granted the L98 (even with a Miniram) is different the the LT5, but I know my first 60ft with the Zf6 in the 89 are probably 2.1 or 2.2
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
|
|
|
|
|
05-22-2008
|
#3 |
|
Join Date: Oct 2007
Location: lone pine and mammoth lakes ca.
Posts: 544
|
Re: What do i need to hit 11.9-12.2 range
MY CAR WITH ALMOST THE SAME EXACT SETUP RUNS BETWEEN 11.78-12.20@117.80-119.10. HERES WHATS DONE TO MINE PORTED BY COREY HENDERSON . HE CUT THE WALL OUT OF THE PLENUM ON THE INJECTORS 1 IN IN HE BLENDED THE HOUSINGINGS INTO THE 2 PORTS . ITS BIGGER PORTING THAN MOST DO BUT IT SEEMS TO WORK. ONE THING I SAW WHILE AT COREYS WAS THE AMOUNT OF HP A GOOD DYNO TUNE CAN NET . THE CAR AFTER PORTING BUT BEFORE TUNNING WAS 385.THEN HE STARTED TUNNING AND ENDED @409.9 RWHP AND 373.66 TQ. I WOULD TRY TO FIND SOMEONE WHO COULD TUNE YOUR CAR ON A DYNO. THEN GET YOURSELF A SET OF MT ET STREETS RUN THEM @16-18 LBS OF AIR . LEAVE THE LINE AT 2000-2500 SHIFT @6900 AND YOU SHOULD GET TO WHERE YOU WANT TO GO . YOU COULD CALL COREY 210 867 6286 ASK HIM HOW MUCH HE WOULD CHARGE TO DOWNLOAD MY TUNE IN YOUR PROM. HOPE THIS HELP .PS MY CAR ALSO HAS A FIDANZA FLYWHEEL
|
|
|
|
|
05-22-2008
|
#4 |
|
Guest
Posts: n/a
|
Re: What do i need to hit 11.9-12.2 range
LGAFF,
M y advice to you, just recalibrate the DRM chip, i saw it dosent feed enough fuel as i Expected .  . Thats why i am gona send my DRM to Marc someday to reporogram fuel curve!
Last edited by HADI-ZR1; 05-22-2008 at 12:45 AM. |
|
|
|
05-22-2008
|
#5 |
|
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: What do i need to hit 11.9-12.2 range
Thanks Hadi, good feedback.
LGAFF 92 ZR1 #234 |
|
|
|
|
05-22-2008
|
#6 | |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,708
|
Re: What do i need to hit 11.9-12.2 range
Quote:
|
|
|
|
|
|
05-22-2008
|
#7 | |
|
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
|
Re: What do i need to hit 11.9-12.2 range
Quote:
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
|
|
|
|
|
05-22-2008
|
#8 |
|
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: What do i need to hit 11.9-12.2 range
**Not a big fan of drag radials
I like to run it as it would be on the street, nothing better than to open up the Road and Track summary and see all of the $100-200K cars your car can outrun. LGAFF 92 ZR1 #234 |
|
|
|
|
05-22-2008
|
#9 |
|
Join Date: Oct 2007
Location: lone pine and mammoth lakes ca.
Posts: 544
|
Re: What do i need to hit 11.9-12.2 range
MY CAR WITH COREYS PROM GIVES AN AFR OF 12.75-8 AT FULL THROTTLE
|
|
|
|
|
05-22-2008
|
#10 |
|
Guest
Posts: n/a
|
Re: What do i need to hit 11.9-12.2 range
most performance cars as lt-5 , love 12.5 . but due to carbon dioxide emissions control ,they keep it up!
 in some turbo and S/c engines, tuner go as law 12 . jmho Last edited by HADI-ZR1; 05-22-2008 at 01:23 AM. |
|
|
 |
|
|
Linear Mode
