04-19-2008 | #1 |
Join Date: May 2007
Location: Westminster, Maryland
Posts: 3,689
|
Temperature Sensor wire length
The previous owner moved the air inlet temperature sensor from the air horn near the throttle body to the air filter housing.
There is about 18" of extra wire coiled up by the radiator. My question is: Can I remove the excess wire or is the system "calibrated" for a certain lead length? My guess is that the lead length is not critical but I hope someone can confirm it. Thanks, Jim
__________________
If it isn't fun, you aren't doing it right! 1990 Black ZR-1 - sold 1993 Quasar Blue ZR-1 1994 Competition Yellow ZR-1 1995 Dark Purple ZR-1 Maryland State Coordinator WAZOO Member |
04-19-2008 | #2 |
Join Date: Feb 2006
Location: San Antonio area
Posts: 1,179
|
Re: Temperature Sensor wire length
The lead length is not critical as long as the wire is the same gauge or larger than stock.
__________________
“Buy the best example of what you want, and pay whatever it takes. That way, you cry only once.” ~ Bruce Meyer |
04-20-2008 | #3 |
Join Date: May 2007
Location: Westminster, Maryland
Posts: 3,689
|
Re: Temperature Sensor wire length
gbrtng,
Thanks for the information. I have shortened the wires and harness and it looks much neater. Jim |
|
|