![]() |
#11 |
![]() Join Date: Jan 2024
Location: Boston, MA
Posts: 166
|
![]()
Thanks phrogs, sounds like a good method to try when I dig into it.
|
![]() |
![]() |
![]() |
#12 |
![]() Join Date: Jan 2024
Location: Boston, MA
Posts: 166
|
![]()
I finally did this yesterday and phrogs is totally correct. I left the C-beam in and moved it towards the passenger side once unbolted. There was plenty of room to undo the rear strap bolts (I need to get a ratcheting wrench for those, ugh...) and pull the driveshaft with the beam still in the car.
__________________
1987: Z51 Coupe, Z51, 4+3, Yellow / Graphite 1994: ZR-1 #150, Admiral Blue / Black 2015: Z06 Coupe, Z07, M7, Arctic White / Red Last edited by scorp508; 06-24-2024 at 11:46 AM. |
![]() |
![]() |
![]() |
Tags |
4.10, gear, speedo, vss |
|
|