|
03-11-2008
|
#1 |
 
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Cam covers? Something not right.
Looking on ebay there is a set of Cam covers posted, only thing is they don't have any cover bolt holes, only holes for plugs, anyone know the scoop. Is this from a mock up? I emailed owner, they weigh about 8/9 pounds each.
 http://cgi.ebay.com/ebaymotors/Corve...spagenameZWDVW LGAFF 92 ZR1 #234 Last edited by LGAFF; 03-11-2008 at 11:39 PM. |
|
|
|
03-11-2008
|
#2 | |
  
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,153
|
Re: Cam covers? Something not right.
Quote:
Looks like wall art to me  I dunno raw castings? Looks like LT4 center holes for the LT5 wanna be?
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V Last edited by GOLDCYLON; 03-11-2008 at 11:47 PM. |
|
|
|
|
|
03-11-2008
|
#3 |
|
Guest
Posts: n/a
|
Re: Cam covers? Something not right.
Defects.
Bolt holes not drilled, oil fill cap not drilled and threaded. The inside the cam bores have not be bored for the camshafts. Spark plug holes were not bored out either. Mercruiser tossed them into the scrap pile. Guy is higher than a kite on the shipping |
|
|
|
03-13-2008
|
#4 |
Join Date: Jul 2006
Location: Omaha, NE
Posts: 322
|
Re: Cam covers? Something not right.
Jeff, I see you changed your avatar again....thank you.
__________________
SteveB '94 ABZ Lucky #13-SOLD |
|
|
|
|
03-13-2008
|
#5 | |
Join Date: Oct 2004
Location: Tennessee
Posts: 200
|
Re: Cam covers? Something not right.
Quote:
__________________
[IMG]http://i16.tinypic.com/4ig0b3a.jpg[/IMG] D. Mark Gentleman Farmer, U.S. Army-Retired LS3,LS6,LT1,LT5,L98,L82,L36,L79,L76 |
|
|
|
|
 |
|
|
Linear Mode
