Driveshaft removal for speedo gear swap. C-Beam out or not? - Page 2 - ZR-1 Net Registry Forums

scorp508 · 04-22-2024

Thanks phrogs, sounds like a good method to try when I dig into it.

scorp508 · 7 Hours Ago

I finally did this yesterday and phrogs is totally correct. I left the C-beam in and moved it towards the passenger side once unbolted. There was plenty of room to undo the rear strap bolts (I need an ratcheting wrench for those) and pull the driveshaft with the beam still in the car.

04-22-2024	#11
scorp508 Join Date: Jan 2024 Location: Boston, MA Posts: 111	Re: Driveshaft removal for speedo gear swap. C-Beam out or not? Thanks phrogs, sounds like a good method to try when I dig into it.

7 Hours Ago	#12
scorp508 Join Date: Jan 2024 Location: Boston, MA Posts: 111	Re: Driveshaft removal for speedo gear swap. C-Beam out or not? I finally did this yesterday and phrogs is totally correct. I left the C-beam in and moved it towards the passenger side once unbolted. There was plenty of room to undo the rear strap bolts (I need an ratcheting wrench for those) and pull the driveshaft with the beam still in the car. __________________ 1987: Z51 Coupe, Z51, 4+3, Yellow / Graphite 1994: ZR-1 #150, Admiral Blue / Black 2015: Z06 Coupe, Z07, M7, Arctic White / Red