![]() |
#1 |
Join Date: Jun 2023
Location: Austin, Texas
Posts: 10
|
![]()
Replacing the cam position sensor here in the next few days. It's in kind of a tricky spot and was curious if anyone had some tips on how to get it out without so much struggle.
Much appreciated. |
![]() |
![]() |
![]() |
#2 |
Join Date: Dec 2007
Location: Fremont,Ca
Posts: 3,057
|
![]()
I replaced mine years ago,it's no problem at all. I believe it's a 8 MM bolt and thats it. Not sure which replacement you have but on some the small shield for the sensor won't fit some replacements.
|
![]() |
![]() |
![]() |
#3 |
![]() Join Date: Apr 2007
Location: Northern VA
Posts: 2,653
|
![]()
Be sure to place a small container below the cam sensor to catch the oil that comes out when the sensor is extracted.
Sent from my iPhone using ZR-1 Net Registry
__________________
Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake |
![]() |
![]() |
![]() |
#4 |
Join Date: Jun 2023
Location: Austin, Texas
Posts: 10
|
![]()
noted. Thanks.
|
![]() |
![]() |
![]() |
|
|