![]() |
#51 |
![]() Join Date: Apr 2017
Location: Wayne Illinois
Posts: 397
|
![]()
I will be leaving the country on Saturday & will not be back until Feb 5. I will not have access to the forum.
After you verify the info above, if the relays are new & the amperage is appripriate being drawn from the pump. The most likely culprit I can think of is the plastic fuel line clamp at the Fuel Pump. That would limit the max pressure the system would see. Haven't seen one break yet, you would be the first, but it is more likely than a turbine pump failing. IF The clamp has failed, replace it with a narrow steel clamp, don't overdo it & don't use a heavy clamp. You will break the pump trying to tighten it. The nozzle on the pump is not torque tollerant. Be very careful. I am confident that you are experiencing one of the above issues. I have not seen one of these pumps fail yet and some guys have tons of miles on them. IF you DO have a failed pump, I will replace it for you when I get back. Please update theis forum or send me a PM on what you are finding. These are the FP Relays I have been recommending and people have had good results with: https://www.amazon.com/gp/product/B0...KIKX0DER&psc=1
__________________
![]() 91-#1935 Black/black & gray, Haibeck 500 Cams by Pete Last edited by Flyman 27; 01-19-2024 at 04:43 PM. |
![]() |
![]() |
![]() |
#52 |
![]() Join Date: Mar 2023
Location: Tallahassee, FL
Posts: 4
|
![]()
Dan,
After the first attempt at repair we replaced the secondary solenoid and fuel pressure regulator only because one was available. Upon start up we could only muster 31-32 psi at idle, and about 38 psi at 3500 rpm. After removing your pump we did notice the clamp on the line connecting to the pump was broken, couldn't tell you if that happened on installation or removal. Aaron Scott who is more of a corvette purist wanted to put two new Delphi pumps on the original assembly and clean up the faulty sending unit as this was the reason for replacement in the first place. So, after rebuilding and installation we were able to attain 42 psi at idle and 51 at 3500 rpm. We tested the car on the road and had the secondaries kick in without interruption or fault codes. The gas gauge also seems to be working for the time being. I don't recall Aaron mentioning if he tested your pump for amp draw so I can't tell you if that was a problem. I'm sorry I couldn't isolate a specific problem for you but do appreciate your feedback in helping me along the way. Andre' |
![]() |
![]() |
![]() |
#53 |
![]() Join Date: Apr 2017
Location: Wayne Illinois
Posts: 397
|
![]()
I don't get it. I must be missing something.
I figured out that the only thing I could think of that could cause what you were seeing would be a broken fuel hose clamp at the pump output. The mechanic removed the sending unit & found a broken fuel hose clamp at the pump (like I figured) & decided to replace the whole unit anyway? For a 50 cent broken hose clamp?
__________________
![]() 91-#1935 Black/black & gray, Haibeck 500 Cams by Pete |
![]() |
![]() |
![]() |
#54 |
![]() Join Date: Jul 2018
Location: New Jersey
Posts: 10
|
![]()
Are these still available? If yes, what is the lead time and payment options
Thanks |
![]() |
![]() |
![]() |
#55 |
![]() Join Date: Apr 2017
Location: Wayne Illinois
Posts: 397
|
![]()
I have 1 in stock now, don't delay if you need it.
After that it will take 7-8 days to get more materials in. I sell them on ebay for an easy, secure transaction. https://www.ebay.com/itm/166637693615
__________________
![]() 91-#1935 Black/black & gray, Haibeck 500 Cams by Pete |
![]() |
![]() |
![]() |
#56 |
![]() Join Date: May 2008
Location: Brownwood Texas
Posts: 119
|
![]()
you wouldn't happen to be making any of these any time soon would you.
|
![]() |
![]() |
![]() |
#57 |
![]() Join Date: Apr 2017
Location: Wayne Illinois
Posts: 397
|
![]()
Just leaving on vacation.
Will be back next Friday. I will have 2 ready to shi at that time. On ebay. Dan Merrill
__________________
![]() 91-#1935 Black/black & gray, Haibeck 500 Cams by Pete |
![]() |
![]() |
![]() |
#58 |
![]() Join Date: Aug 2014
Location: 76078
Posts: 4
|
![]()
Purchased your fuel pump and had a local garage install it because the rebuilt fuel pump I tried got stuck during installation. Your pump got my ZR-1 running again. Problem now is it stumbles a bit if pushed hard with my vallet key turned off. It stumbles and acts like it is not getting any fuel at times with the valley key turned on. Any suggestions regarding what I did wrong?
Bruce Dickey 1102 Brown Cir Rhome, TX. 76078 mbrucedickey@gmail.com Last edited by green91ZR-1; 5 Days Ago at 03:21 PM. |
![]() |
![]() |
![]() |
|
|