![]() |
#1 |
![]() Join Date: Feb 2010
Location: Ochlocknee, GA
Posts: 435
|
![]()
I just got this back from a print shop showing my LT5 engine specs on my
ash tray lid. |
![]() |
![]() |
![]() |
#2 |
![]() Join Date: Jun 2015
Location: Morris, IL
Posts: 176
|
![]() |
![]() |
![]() |
![]() |
#3 |
![]() Join Date: Feb 2010
Location: Ochlocknee, GA
Posts: 435
|
![]()
Well first you have to one or fine one. they come up for sale once in awhile.
almost any print shop can make a delcal over the stock lettering. as you can see mine is a little worn. 350 cubic inches 375 horse power 370 torque ft. lbs 11.1 comp ratio Hope you can fine one, or take a picture of the label and add your own information, they may able to duplicate the orginial LT5 emblem. JOHN |
![]() |
![]() |
![]() |
#4 |
![]() Join Date: Jun 2015
Location: Morris, IL
Posts: 176
|
![]()
I have one on my cup holder cover. I might just take the whole thing into a sign shop. I will bring my Dyno Sheet to get my specs. I would also want to cover the 5.7 liter. I always refer to my 368 as a 6.0 liter. Thanks for pointing me in the right direction.
Sent from my SM-A546U using ZR-1 Net Registry mobile app |
![]() |
![]() |
![]() |
#5 |
![]() Join Date: Feb 2010
Location: Ochlocknee, GA
Posts: 435
|
![]()
You know I forgot about the 5.7 liter. 368 convertered to liters is 6.03 liter.
mabe they can make a small delcal that says 6.0 liter. over the 5.7 numbers. I should think more about what I do and plan ahead! Ill let you know how I make out. JOHN |
![]() |
![]() |
![]() |
#6 |
![]() Join Date: Feb 2010
Location: Ochlocknee, GA
Posts: 435
|
![]()
Went back to print shop and he said he could change 5.7 to 6.0 decal. He
also said that if you can get a full size photo of the LT5 engine spec trim piece any print shop could make a same size decal with your engine specs. I know of a few Corvette sites sell the one for LT1 specs,same size as the LT5 piece. JOHN |
![]() |
![]() |
![]() |
#7 |
![]() Join Date: Feb 2010
Location: Ochlocknee, GA
Posts: 435
|
![]()
I went to Corvette central site and they have engine specs trim plaques for
the LT4 and L98 ,you could use that to make your custom LT5 engine specs. Then take it to a print shop and have them make it the away you want. Hope this helps JOHN |
![]() |
![]() |
![]() |
#8 |
![]() Join Date: May 2010
Location: Japan
Posts: 3,572
|
![]()
If anyone is on Facebook, this guy sells a version that you can customize to order.
__________________
Craig "ZR-1 NO KA 'OI" "ZR-1 ICHIBAN" 1995 #228 Black/Black with Dunn Heads ZR-1 owner since September 2003 ZR-1 Net Registry Founding Member #0074 NCM Lifetime Member #2048 ![]() |
![]() |
![]() |
![]() |
|
|