Pressurizing oil procedure ? - ZR-1 Net Registry Forums

Zrracer · 07-29-2023

My car has been sitting for awhile. I would like to do this prior to starting. Can
Someone point me to instructions for this?
TIA,
Robin

bob@tradeshowconsulting.c · 07-29-2023

what I do on my 1993 ZR1 is remove the fuel pumps fuses ( # 14 and # 15 )

Crank the engine about 3 times ..only cranking for 3 seconds each time ..as to not overheat the starter ....... then I put the fuses in and start the car.

works every time and no chain tension-er noise either.

Now..this might not be right ....and others may not do it this way..and may have another way

but it has worked for me for years

Mystic ZR-1 · 07-29-2023

Remove injector 1 and 2 fuses
Disables fuel injectors

AirbusDriver · 07-29-2023

I believe Marc Haibeck has a tutorial on his website...

http://www.zr1specialist.com/HAT%20W...ping%20LT5.pdf

bob@tradeshowconsulting.c · 07-30-2023

https://fuse-box.info/chevrolet/chev...993-1996-fuses

Rick Gibbons · 08-07-2023

I don't know if this will help or not, but I enjoy the videos C&S posts and this is one I saw a while back that you might be interested in.

https://www.youtube.com/watch?v=TQgYU0EoZFc

The comments section has multiple posts from several folks who have used this successfully to pre-lubricate an engine after it's been sitting for some time.

Corvettes White · 08-07-2023

Quote:

Originally Posted by Rick Gibbons

I don't know if this will help or not, but I enjoy the videos C&S posts and this is one I saw a while back that you might be interested in.

https://www.youtube.com/watch?v=TQgYU0EoZFc

The comments section has multiple posts from several folks who have used this successfully to pre-lubricate an engine after it's been sitting for some time.

I saw the video some time ago. Figured it started with the story of a lady putting her feet on the clutch and gas petal at the same time to start the car at the factory.

George.

07-29-2023	#1
Zrracer Join Date: Mar 2015 Location: Palm Harbor, FL Posts: 46	Pressurizing oil procedure ? My car has been sitting for awhile. I would like to do this prior to starting. Can Someone point me to instructions for this? TIA, Robin

07-29-2023	#2
bob@tradeshowconsulting.c Join Date: May 2022 Location: Georgia Posts: 82	Re: Pressurizing oil procedure ? what I do on my 1993 ZR1 is remove the fuel pumps fuses ( # 14 and # 15 ) Crank the engine about 3 times ..only cranking for 3 seconds each time ..as to not overheat the starter ....... then I put the fuses in and start the car. works every time and no chain tension-er noise either. Now..this might not be right ....and others may not do it this way..and may have another way but it has worked for me for years Last edited by bob@tradeshowconsulting.c; 07-30-2023 at 08:05 AM.

07-29-2023	#3
Mystic ZR-1 Join Date: Jan 2010 Location: Mystic CT Posts: 2,631	Re: Pressurizing oil procedure ? Remove injector 1 and 2 fuses Disables fuel injectors

07-29-2023	#4
AirbusDriver Join Date: Jul 2016 Location: Harrodsburg, KY Posts: 434	Re: Pressurizing oil procedure ? I believe Marc Haibeck has a tutorial on his website... http://www.zr1specialist.com/HAT%20W...ping%20LT5.pdf Last edited by AirbusDriver; 07-29-2023 at 08:27 PM.

07-30-2023	#5
bob@tradeshowconsulting.c Join Date: May 2022 Location: Georgia Posts: 82	Re: Pressurizing oil procedure ? https://fuse-box.info/chevrolet/chev...993-1996-fuses

08-07-2023	#6
Rick Gibbons Join Date: Oct 2022 Location: North Carolina Posts: 7	Re: Pressurizing oil procedure ? I don't know if this will help or not, but I enjoy the videos C&S posts and this is one I saw a while back that you might be interested in. https://www.youtube.com/watch?v=TQgYU0EoZFc The comments section has multiple posts from several folks who have used this successfully to pre-lubricate an engine after it's been sitting for some time.