![]() |
#1 |
![]() Join Date: Apr 2017
Location: Wayne Illinois
Posts: 396
|
![]()
As many of you know, I sell upgraded single fuel pump systems for our ZR-1's. I occasionally received requests for the chassis side electrical connector due to corrosion issues.
THAT WAS A CHALLENGE! After a LOT of time researching (almost 10 hours!), I finally discovered the GM part number for the connector. It's a Weather Pack 4-pin, but has different alignment tabs so it only fits a Corvette Fuel System. I even located a company in Germany that had an old stash of them. So I ended up with a couple dozzen of them to offer to anyone who is in need. I made pigtails with proper color coding of 12" wires. **If you want I could ship you a custom set with just all the electrical pieces if you want to directly connect to your harness & you have the proper crimper tool. Just send me a note when purchasing. Here is the ad: NEW Fuel Pump Sending Unit Pigtail CHASSIS SIDE (NOT Pump Side!)! 1989-95 Corvette LT5 ONLY. NEW! GM Connector, very hard to find, had to get these from Germany! Terminals rated at 20 Amp. 12 inch, 16 gage wire leads. https://www.ebay.com/itm/166109066247 Pics are in ebay ad. Thanks, Dan
__________________
![]() 91-#1935 Black/black & gray, Haibeck 500 Cams by Pete |
![]() |
![]() |
![]() |
#2 |
![]() Join Date: Dec 2020
Location: Sydney, Australia
Posts: 85
|
![]()
Just a post to vouch for the quality and prompt postage of these pigtails, I bought one of these off Dan off ebay recently as a spare.
![]() |
![]() |
![]() |
![]() |
|
|