LG Corvette GT2 car - ZR-1 Net Registry Forums

03-01-2008

Taken from www.badboyvettes.com

We asked our new BadBoy friend Lou Gigliotti of LG Motorsports for some pictures of the progress of his GT2 Vette. Here's what we got back-

“These photos are [of] various chassis. But, the final build is taking place on the red chassis. Not allowed to release other photos as http://"http://www.rileytech.com/New...Itm=28"] Riley is still keeping things close to the vest.

We plan to test on the way down to the 12hr, then will hit Sebring next Sat / Sunday.

[Drivers] Doug Peterson and I got fitted to the seat today, as well as Marc Goossens FYI- The pedals are on an electric servo so the "Tall Guy" drivers can fit the car with a touch of a button. I am 5'6, the perfect driver size, while my teammates suffer from being 6'1".

Check out the CRD-built Ferrari-killer LS3 engine! More pictures next week! This GT2 C6 by Riley Technologies will be a sight to behold when complete.”

'GT2 Lou' also hinted that the front splitter will be dramatic. IT IS! What we also see is a stout chassis, individual cross-flow intakes similar to the GT1 LS7.R, and unique bodywork. Note the shapes of the fender tops. They seem more rounded than the sharp edges of the GT1 front fenders. One shot looks like a NACA duct is being fitted to the nose [engine intake?] and the nose itself is sporting very distinctive air mgt. aerodynamics......

....yet still leaves room for a JAKE SKULL!

RedSled · 03-02-2008

Good stuff. Can't wait to see and follow their progress. Thanks, K

Zr1 Destroyer · 03-02-2008

Nice lookin......I hope this runs better then that yellow crapper from the Forza show on speed channel!....lol..j/k!

03-01-2008	#1
Jeffvette Guest Posts: n/a	LG Corvette GT2 car Taken from www.badboyvettes.com We asked our new BadBoy friend Lou Gigliotti of LG Motorsports for some pictures of the progress of his GT2 Vette. Here's what we got back- “These photos are [of] various chassis. But, the final build is taking place on the red chassis. Not allowed to release other photos as http://"http://www.rileytech.com/New...Itm=28"] Riley is still keeping things close to the vest. We plan to test on the way down to the 12hr, then will hit Sebring next Sat / Sunday. [Drivers] Doug Peterson and I got fitted to the seat today, as well as Marc Goossens FYI- The pedals are on an electric servo so the "Tall Guy" drivers can fit the car with a touch of a button. I am 5'6, the perfect driver size, while my teammates suffer from being 6'1". Check out the CRD-built Ferrari-killer LS3 engine! More pictures next week! This GT2 C6 by Riley Technologies will be a sight to behold when complete.” 'GT2 Lou' also hinted that the front splitter will be dramatic. IT IS! What we also see is a stout chassis, individual cross-flow intakes similar to the GT1 LS7.R, and unique bodywork. Note the shapes of the fender tops. They seem more rounded than the sharp edges of the GT1 front fenders. One shot looks like a NACA duct is being fitted to the nose [engine intake?] and the nose itself is sporting very distinctive air mgt. aerodynamics...... ....yet still leaves room for a JAKE SKULL! Last edited by Jeffvette; 03-01-2008 at 06:00 PM.

03-02-2008	#2
RedSled Join Date: Nov 2006 Location: Germantown, Maryland Posts: 522	Re: LG Corvette GT2 car Good stuff. Can't wait to see and follow their progress. Thanks, K

03-02-2008	#3
Zr1 Destroyer Join Date: Oct 2005 Location: Candy Apple...yUmMy Posts: 1,137	Re: LG Corvette GT2 car Nice lookin......I hope this runs better then that yellow crapper from the Forza show on speed channel!....lol..j/k! Last edited by Zr1 Destroyer; 03-02-2008 at 08:40 PM.